Input-CompareComparison of ARS CurvesCY-CB Model InputsFaultMagnitude6.5(5 to 8.5)FRV0(input 1 = Reverse)FNM0(input 1 = Normal)Dip (degree)90( 1 to 90)ZTOR (km)0DistanceRRUP (km)12.0RJB (km)12.0Rx (km)12.0Hanging Wall?Near-Field Factor?0, otherwise 0

=Fault dip angle

ZTOR =Depth to top of rupture (km)

FRV =1 for 30 150, 0 otherwise (combined reverse and reverse-oblique); is the rake angle.

FNM =1 for -120 -60, 0 otherwise (only normal earthquakes; normal-oblique is considered to be the same as strike-slip); is the rake angle.

VS30 =Average shear wave velocity for top 30 m (m/s)

Z1.0 =Depth to shear wave velocity of 1.0 km/s (m). If unknown estimate using Equation (1).

MBD000F0B5E.unknown

MBD000F0B5F.docIntra-event Standard Deviation Model

FInferred= 1, if VS30 is not measured,

= 0, otherwise

FMeasured = 1, if VS30 is measured,

= 0, otherwise

EMBED Equation.3

_1247244147.unknown

_1255546087.unknown

MBD000F0B5D.unknown