Description - Aperam - stal nierdzewnanierdzewni.com/.../FT_UGINOX_TT4_UK.pdf · The UGINOX TT4...
2
uginox tt4 The chequer pattern finish UGINOX ® TT4 Description > UGINOX TT4 is a one sided chequer patterned finish (typical pattern depth: 50 μm / 0.0020 inch). > This finish is available on select ferritic grades from our KARA range http://www.aperam.com/kara and on select austenitic grades. (Please refer to our dimensional range). > We propose a width range up to 1500 mm depending on thickness. > The surface conforms to the norm EN 10088 2M. Key strengths > Wear resistant finish. > Good resistance to mechanical attack. > High mechanical performance. > Good corrosion resistance. > Easy to deep draw. Applications > Building: façade, floor, street furniture, decorative elements, etc. > Catering: work tops, cladding, etc. > Lifts: cabins, doors, various decorative components, etc. > Sinks: bowls, draining boards, etc. Recommendations Coatings > We recommend the use of a coating to protect the surface during transport, storage and subsequent transforming operations. > The choice of coating is based on the requirements (ease of forming, laser cutting, …). Please do not hesitate to consult us for specific requests. > If coating is not required, we suggest paper interleaving in between the coil laps or sheets. UGINOX TT4 surface finish
Transcript of Description - Aperam - stal nierdzewnanierdzewni.com/.../FT_UGINOX_TT4_UK.pdf · The UGINOX TT4...
uginox tt4The chequer patternfinish UGINOX® TT4Description
> UGINOX TT4 is a one sided chequer patterned finish (typical pattern depth: 50 μm / 0.0020 inch).> This finish is available on select ferritic grades from our KARA range http://www.aperam.com/kara and on select austenitic grades. (Please refer to our dimensional range). > We propose a width range up to 1500 mm depending on thickness. > The surface conforms to the norm EN 10088 2M.
Key strengths
> Wear resistant finish. > Good resistance to mechanical attack. > High mechanical performance. > Good corrosion resistance. > Easy to deep draw.
Applications
> Building: façade, floor, street furniture, decorative elements, etc. > Catering: work tops, cladding, etc. > Lifts: cabins, doors, various decorative components, etc. > Sinks: bowls, draining boards, etc.
Recommendations
Coatings> We recommend the use of a coating to protect the surface during transport, storage and subsequent transforming operations. > The choice of coating is based on the requirements (ease of forming, laser cutting, …). Please do not hesitate to consult us for specific requests. > If coating is not required, we suggest paper interleaving in between the coil laps or sheets.
UGINOX TT4 surface finish
Sep
tem
ber 2
011,
Ape
ram
– S
tain
less
Eur
ope.
FT-
UG
INO
X T
T4.e
n. W
hile
eve
ry c
are
has
been
take
n to
ens
ure
that
the
info
rmat
ion
cont
aine
d in
this
pub
licat
ion
is a
s ac
cura
te a
s po
ssib
le, A
pera
m –
Sta
inle
ss E
urop
e, in
com
mon
with
all
Ape
ram
Gro
up
com
pani
es,c
anno
t gua
rant
ee th
at it
is c
ompl
ete
nor t
hat i
t is
free
from
err
or. K
AR
A® a
nd U
GIN
OX
® a
re b
rand
s of
Ape
ram
– S
tain
less
Eur
ope,
regi
ster
ed in
num
erou
s co
untri
es. D
esig
n an
d co
ncep
tion:
ww
w.a
genc
embc
om.c
om. P
hoto
grap
hic
cred
its: A
lber
t Zek
ri.
> The patterning operation at cold-rolling retains the properties of the passive layer.
The UGINOX TT4 finish is available in coils, slit coils and sheets.These grades comply with American NSF/ANSI 51-2007 and European N°1 935/2004 standards regarding material used in contact with food.
> The bright annealing stage retains its brightness, and ensures an optimum passive layer for corrosion resistance.
1,357 pt Norms Thicknesses in mm (with standard tolerances)
Grades ASTM UNS EN 0.6 0.7 0.8 1 1.2 1.5 2
K30(2) 430 S43000 1.4016 1250 1250 1500 1500 1500 1500 1500
K41 441 S43932 1.4509 1250 1250 1500 1500 1500 1500 1500
304(1) 304 S30400 1.4301 1250 1250 1500 1500 1500 1500 1500
316L* 316L S31603 1.4404 1250 1250 1250 1250 1250 1250 1250
* 1,500 mm wide in thickness ≥0,8mm , consult us.
(1) 304D/304ED/189L: consult us (2) K30ED: consult us
Standard
Our dimensional range
Max
imum
wid
ths
in m
m
Aperam Stainless Europe1-5 rue Luigi CherubiniFR-93212 La Plaine Saint Denis Cedex
InformationTel. : +33 1 71 92 06 52Fax : +33 1 71 92 07 97www.aperam.com/[email protected]
If you wish to find out more about our grades, please consult our technical data sheets on-line: http://www.aperam.com/technical-data-sheets
Our manufacturing Process
UGINOX TT4 is patterned with specially prepared cylinders during the rolling operation followed by a further annealing stage in a bright annealing furnace. This operation produces a ductile product, optimised for deep-drawing, free of internal stresses in order to avoid forming issues such as shape, waves, twist, spring-back... during additional finishing processes such as cutting to length, forming...View all of the stainless steel manufacturing process on our website:http://www.aperam.com/stainlesseurope-system-certificates
> The rolling technique used enables both a uniform and reproductible finish for the different grades and dimensions. > This production method is certified to the standards ISO 9001 and ISO 14001: http://www.aperam.com/stainlesseurope-system-certificates
Consult us
