0

1

2

3

4

5

6

7

8

9

10

0 2 4 6 8 10 12 14 16 18 20VGS - Gate-to- Source Voltage (V)

RD

S(o

n) -

On-

Sta

te R

esis

tanc

e (

mΩ

) TC = 25°C, I D = 100ATC = 125°C, I D = 100A

G001

0

1

2

3

4

5

6

7

8

9

10

0 10 20 30 40 50 60 70 80Qg - Gate Charge (nC)

VG

S -

Gat

e-to

-Sou

rce

Vol

tage

(V

) ID = 100AVDS = 40V

G001

Gate

(Pin 1)

Drain (Pin 2)

Source (Pin 3)

Product

Folder

Sample &Buy

Technical

Documents

Tools &

Software

Support &Community

CSD19505KCSSLPS480B –JANUARY 2014–REVISED OCTOBER 2014

CSD19505KCS 80 V N-Channel NexFET™ Power MOSFET1 Features

Product Summary1• Ultra-Low Qg and Qgd TA = 25°C TYPICAL VALUE UNIT• Low Thermal Resistance VDS Drain-to-Source Voltage 80 V• Avalanche Rated Qg Gate Charge Total (10 V) 76 nC

Qgd Gate Charge Gate to Drain 11 nC• Pb-Free Terminal PlatingVGS = 6 V 2.9 mΩ• RoHS Compliant RDS(on) Drain-to-Source On-ResistanceVGS = 10 V 2.6 mΩ• Halogen Free

VGS(th) Threshold Voltage 2.6 V• TO-220 Plastic Package

Ordering Information(1)2 Applications

Device Package Media Qty Ship• Secondary Side Synchronous Rectifier CSD19505KCS TO-220 Plastic Package Tube 50 Tube• Motor Control (1) For all available packages, see the orderable addendum at

the end of the data sheet.3 Description

Absolute Maximum RatingsThis 80 V, 2.6 mΩ, TO-220 NexFET™ powerMOSFET is designed to minimize losses in power TA = 25°C VALUE UNITconversion applications. VDS Drain-to-Source Voltage 80 V

VGS Gate-to-Source Voltage ±20 V

Continuous Drain Current (Package limited) 150

Continuous Drain Current (Silicon limited), 208ID TC = 25°C A

Continuous Drain Current (Silicon limited), 147TC = 100°C

IDM Pulsed Drain Current (1) 400 A

PD Power Dissipation 300 W

TJ, Operating Junction and –55 to 175 °CTstg Storage Temperature Range

Avalanche Energy, single pulseEAS 510 mJID = 101 A, L = 0.1 mH, RG = 25 Ω.

(1) Max RθJC = 0.5°C/W, pulse duration ≤100 μs, duty cycle ≤1%

.

.

RDS(on) vs VGS Gate Charge

1

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,intellectual property matters and other important disclaimers. PRODUCTION DATA.

CSD19505KCSSLPS480B –JANUARY 2014–REVISED OCTOBER 2014 www.ti.com

Table of Contents5.3 Typical MOSFET Characteristics.............................. 41 Features .................................................................. 1

6 Device and Documentation Support.................... 72 Applications ........................................................... 16.1 Trademarks ............................................................... 73 Description ............................................................. 16.2 Electrostatic Discharge Caution................................ 74 Revision History..................................................... 26.3 Glossary .................................................................... 75 Specifications......................................................... 3

7 Mechanical, Packaging, and Orderable5.1 Electrical Characteristics........................................... 3Information ............................................................. 85.2 Thermal Information .................................................. 37.1 KCS Package Dimensions........................................ 9

4 Revision HistoryNOTE: Page numbers for previous revisions may differ from page numbers in the current version.

Changes from Revision A (February 2014) to Revision B Page

• Updated Pulsed Drain Current Conditions ............................................................................................................................ 1• Updated the SOA in Figure 10 ............................................................................................................................................... 6

Changes from Original (January 2014) to Revision A Page

• Increased Pulsed Drain Current Limit ................................................................................................................................... 1• Updated Figure 9.................................................................................................................................................................... 5

2 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated

Product Folder Links: CSD19505KCS

CSD19505KCSwww.ti.com SLPS480B –JANUARY 2014–REVISED OCTOBER 2014

5 Specifications

5.1 Electrical Characteristics(TA = 25°C unless otherwise stated)

PARAMETER TEST CONDITIONS MIN TYP MAX UNITSTATIC CHARACTERISTICSBVDSS Drain-to-Source Voltage VGS = 0 V, ID = 250 μA 80 VIDSS Drain-to-Source Leakage Current VGS = 0 V, VDS = 64 V 1 μAIGSS Gate-to-Source Leakage Current VDS = 0 V, VGS = 20 V 100 nAVGS(th) Gate-to-Source Threshold Voltage VDS = VGS, ID = 250 μA 2.2 2.6 3.2 V

VGS = 6 V, ID = 100 A 2.9 3.8 mΩRDS(on) Drain-to-Source On-Resistance

VGS = 10 V, ID = 100 A 2.6 3.1 mΩgfs Transconductance VDS = 8 V, ID = 100 A 262 SDYNAMIC CHARACTERISTICSCiss Input Capacitance 6090 7820 pFCoss Output Capacitance VGS = 0 V, VDS = 40 V, ƒ = 1 MHz 1600 2080 pFCrss Reverse Transfer Capacitance 26 34 pFRG Series Gate Resistance 1.4 2.8 ΩQg Gate Charge Total (10 V) 76 nCQgd Gate Charge Gate to Drain 11 nC

VDS = 40 V, ID = 100 AQgs Gate Charge Gate to Source 25 nCQg(th) Gate Charge at Vth 15 nCQoss Output Charge VDS = 40 V, VGS = 0 V 214 nCtd(on) Turn On Delay Time 31 nstr Rise Time 16 nsVDS = 50 V, VGS = 10 V,

IDS = 100 A, RG = 0 Ωtd(off) Turn Off Delay Time 62 nstf Fall Time 6 nsDIODE CHARACTERISTICSVSD Diode Forward Voltage ISD = 100 A, VGS = 0 V 0.9 1.1 VQrr Reverse Recovery Charge 400 nCVDS= 40 V, IF = 100 A,

di/dt = 300 A/μstrr Reverse Recovery Time 88 ns

5.2 Thermal Information(TA = 25°C unless otherwise stated)

THERMAL METRIC MIN TYP MAX UNITRθJC Junction-to-Case Thermal Resistance 0.5

°C/WRθJA Junction-to-Ambient Thermal Resistance 62

Copyright © 2014, Texas Instruments Incorporated Submit Documentation Feedback 3

Product Folder Links: CSD19505KCS

0

20

40

60

80

100

120

140

160

180

200

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7VDS - Drain-to-Source Voltage (V)

I DS -

Dra

in-t

o-S

ourc

e C

urre

nt (

A)

VGS =10VVGS =8VVGS =6V

G001

0

20

40

60

80

100

120

140

160

180

200

0 1 2 3 4 5 6 7VGS - Gate-to-Source Voltage (V)

I DS -

Dra

in-t

o-S

ourc

e C

urre

nt (

A)

TC = 125°CTC = 25°CTC = −55°C

VDS = 5V

G001

CSD19505KCSSLPS480B –JANUARY 2014–REVISED OCTOBER 2014 www.ti.com

5.3 Typical MOSFET Characteristics(TA = 25°C unless otherwise stated)

Figure 1. Transient Thermal Impedance

Figure 2. Saturation Characteristics Figure 3. Transfer Characteristics

4 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated

Product Folder Links: CSD19505KCS

0.4

0.6

0.8

1

1.2

1.4

1.6

1.8

2

2.2

2.4

−75 −50 −25 0 25 50 75 100 125 150 175 200TC - Case Temperature (ºC)

Nor

mal

ized

On-

Sta

te R

esis

tanc

e

VGS = 6VVGS = 10V

ID = 100A

G001

0.0001

0.001

0.01

0.1

1

10

100

0 0.2 0.4 0.6 0.8 1VSD − Source-to-Drain Voltage (V)

I SD −

Sou

rce-

to-D

rain

Cur

rent

(A

) TC = 25°CTC = 125°C

G001

1.2

1.4

1.6

1.8

2

2.2

2.4

2.6

2.8

3

3.2

−75 −50 −25 0 25 50 75 100 125 150 175 200TC - Case Temperature (ºC)

VG

S(th

) - T

hres

hold

Vol

tage

(V

)

ID = 250uA

G001

0

1

2

3

4

5

6

7

8

9

10

0 2 4 6 8 10 12 14 16 18 20VGS - Gate-to- Source Voltage (V)

RD

S(o

n) -

On-

Sta

te R

esis

tanc

e (

mΩ

) TC = 25°C, I D = 100ATC = 125°C, I D = 100A

G001

0

1

2

3

4

5

6

7

8

9

10

0 10 20 30 40 50 60 70 80Qg - Gate Charge (nC)

VG

S -

Gat

e-to

-Sou

rce

Vol

tage

(V

) ID = 100AVDS = 40V

G001

1

10

100

1000

10000

100000

0 10 20 30 40 50 60 70 80VDS - Drain-to-Source Voltage (V)

C −

Cap

acita

nce

(pF

)

Ciss = Cgd + CgsCoss = Cds + CgdCrss = Cgd

G001

CSD19505KCSwww.ti.com SLPS480B –JANUARY 2014–REVISED OCTOBER 2014

Typical MOSFET Characteristics (continued)(TA = 25°C unless otherwise stated)

Figure 4. Gate Charge Figure 5. Capacitance

Figure 6. Threshold Voltage vs Temperature Figure 7. On-State Resistance vs Gate-to-Source Voltage

Figure 8. Normalized On-State Resistance vs Temperature Figure 9. Typical Diode Forward Voltage

Copyright © 2014, Texas Instruments Incorporated Submit Documentation Feedback 5

Product Folder Links: CSD19505KCS

0

25

50

75

100

125

150

175

−50 −25 0 25 50 75 100 125 150 175 200TC - Case Temperature (ºC)

I DS -

Dra

in-

to-

Sou

rce

Cur

rent

(A

)

G001

0.1

1

10

100

1000

5000

0.1 1 10 100 1000VDS - Drain-to-Source Voltage (V)

I DS -

Dra

in-t

o-S

ourc

e C

urre

nt (

A) 10us

100us1ms10ms

DC

Single PulseMax RthetaJC = 0.5ºC/W

G001

10

100

500

0.01 0.1 1TAV - Time in Avalanche (mS)

I AV -

Pea

k A

vala

nche

Cur

rent

(A

) TC = 25ºCTC = 125ºC

G001

CSD19505KCSSLPS480B –JANUARY 2014–REVISED OCTOBER 2014 www.ti.com

Typical MOSFET Characteristics (continued)(TA = 25°C unless otherwise stated)

Figure 10. Maximum Safe Operating Area Figure 11. Single Pulse Unclamped Inductive Switching

Figure 12. Maximum Drain Current vs Temperature

6 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated

Product Folder Links: CSD19505KCS

CSD19505KCSwww.ti.com SLPS480B –JANUARY 2014–REVISED OCTOBER 2014

6 Device and Documentation Support

6.1 TrademarksNexFET is a trademark of Texas Instruments.

6.2 Electrostatic Discharge CautionThese devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foamduring storage or handling to prevent electrostatic damage to the MOS gates.

6.3 GlossarySLYZ022 — TI Glossary.

This glossary lists and explains terms, acronyms, and definitions.

Copyright © 2014, Texas Instruments Incorporated Submit Documentation Feedback 7

Product Folder Links: CSD19505KCS

CSD19505KCSSLPS480B –JANUARY 2014–REVISED OCTOBER 2014 www.ti.com

7 Mechanical, Packaging, and Orderable InformationThe following pages include mechanical packaging and orderable information. This information is the mostcurrent data available for the designated devices. This data is subject to change without notice and revision ofthis document. For browser-based versions of this data sheet, refer to the left-hand navigation.

8 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated

Product Folder Links: CSD19505KCS

CSD19505KCSwww.ti.com SLPS480B –JANUARY 2014–REVISED OCTOBER 2014

7.1 KCS Package Dimensions

Pin ConfigurationPosition Designation

Pin 1 GatePin 2 / Tab Drain

Pin 3 Source

Copyright © 2014, Texas Instruments Incorporated Submit Documentation Feedback 9

Product Folder Links: CSD19505KCS

PACKAGE OPTION ADDENDUM

www.ti.com 18-Oct-2014

Addendum-Page 1

PACKAGING INFORMATION

Orderable Device Status(1)

Package Type PackageDrawing

Pins PackageQty

Eco Plan(2)

Lead/Ball Finish(6)

MSL Peak Temp(3)

Op Temp (°C) Device Marking(4/5)

Samples

CSD19505KCS ACTIVE TO-220 KCS 3 50 Pb-Free(RoHS)

CU SN N / A for Pkg Type -55 to 175 CSD19505KCS

(1) The marketing status values are defined as follows:ACTIVE: Product device recommended for new designs.LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.PREVIEW: Device has been announced but is not in production. Samples may or may not be available.OBSOLETE: TI has discontinued the production of the device.

(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availabilityinformation and additional product content details.TBD: The Pb-Free/Green conversion plan has not been defined.Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement thatlead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used betweenthe die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weightin homogeneous material)

(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.

(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuationof the previous line and the two combined represent the entire Device Marking for that device.

(6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finishvalue exceeds the maximum column width.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on informationprovided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken andcontinues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

PACKAGE OPTION ADDENDUM

www.ti.com 18-Oct-2014

Addendum-Page 2

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and otherchanges to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latestissue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current andcomplete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of salesupplied at the time of order acknowledgment.TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s termsand conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessaryto support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarilyperformed.TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products andapplications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provideadequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, orother intellectual property right relating to any combination, machine, or process in which TI components or services are used. Informationpublished by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty orendorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of thethird party, or a license from TI under the patents or other intellectual property of TI.Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alterationand is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altereddocumentation. Information of third parties may be subject to additional restrictions.Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or servicevoids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirementsconcerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or supportthat may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards whichanticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might causeharm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the useof any TI components in safety-critical applications.In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is tohelp enable customers to design and create their own end-product solutions that meet applicable functional safety standards andrequirements. Nonetheless, such components are subject to these terms.No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the partieshave executed a special agreement specifically governing such use.Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use inmilitary/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI componentswhich have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal andregulatory requirements in connection with such use.TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use ofnon-designated products, TI will not be responsible for any failure to meet ISO/TS16949.

Products ApplicationsAudio www.ti.com/audio Automotive and Transportation www.ti.com/automotiveAmplifiers amplifier.ti.com Communications and Telecom www.ti.com/communicationsData Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computersDLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-appsDSP dsp.ti.com Energy and Lighting www.ti.com/energyClocks and Timers www.ti.com/clocks Industrial www.ti.com/industrialInterface interface.ti.com Medical www.ti.com/medicalLogic logic.ti.com Security www.ti.com/securityPower Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defenseMicrocontrollers microcontroller.ti.com Video and Imaging www.ti.com/videoRFID www.ti-rfid.comOMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.comWireless Connectivity www.ti.com/wirelessconnectivity

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265Copyright © 2015, Texas Instruments Incorporated