Crownpo Technology Low Capacitance ESD Protection Array · M-STD-202, Method 202 Guaranteed High...
Transcript of Crownpo Technology Low Capacitance ESD Protection Array · M-STD-202, Method 202 Guaranteed High...
μ
Jul 2 018Document No. RESDG65V0J
AB
FeaturesMeet IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
Meet IEC61000-4-4 (EFT) rating. 40A (5/50ns)
Meet IEC61000-4-5 (Lightning) rating. 24A (8/20μs)
Protects two I/O line and power line
Working Voltage : 5V
Pb free version, RoHS compliant, and Halogen free
Mechanical DataCase:SOT-666 (SC-89) standard package, molded plastic
Terminal:Matte tin plated, lead free, solderable per M-STD-202, Method 202 Guaranteed
High temperature soldering guaranteed:260OC/10s
Molding Compound Flammability Rating:UL-94V-O
Weight:3 mg (approximately)
ApplicationsUSB Power and Data Line Protection
10/100/1000 Ethernet Ports
High-Definition Multimedia Interface (HDMI)
Monitors and Flat Panel Displays
Video Graphics Cards
1.50 1.70 0.059 0.066
1.10 1.30 0.043 0.051
0.08 0.18 0.003 0.0070.50 0.60 0.021 0.023
0.17 0.27 0.007 0.010
Min Max Min Max
1.00 Typ 0.04 Typ
Unit (mm) Unit (inch)
0.50 Typ 0.02 Typ
Ordering Information
Low Capacitance ESD Protection Array
SOT-666 RESDG65V0J 3K/7" Reel SL3
Package Part No. Packing Marking
ValueSymbol UnitParameterPeak Pulse Power (tp = 8/20μs waveformPeak Pulse Current (tp = 8/20μs)
ESD per IEC 61000-4-2 (Air)ESD per IEC 61000-4-2 (Contact)
Parameter
Maximum Ratings and Electrical Characteristics (Rating at 25oC ambient temperature unless otherwise specified)
Maximum Ratings
Electrical CharacteristicsEl
Pin Configuration
Pulse Duration (μs) e (μs)
Jul 2 018Document No. RESDG65V0J
Low Capacitance ESD Protection Array
Rating and Characteristic Curves
20 40 60 80 100 120 140 160 180
10 100 1000 5 10 15 20 25 30
Tr = 8μs, td = 20μs
Fig 1 Non-Repetitive Peak Pulse Power vs Pulse Time Fig 2 Pulse Waveform
Fig 3 Admissible Power Dissipation Curve Fig 4 Typical Junction Capacitance
Fig 5 Clamping Voltage vs Peak Pulse Current
Jul 2 018Document No. RESDG65V0J
Low Capacitance ESD Protection Array
Tape & Reel specification
Item Symbo l Dimension(mm)
Carrier width A 1.75 ± 0.10
Carrier length B 1.75 ± 0.10
Carrier depth C 0.67 ± 0.10
Sprocket hole d 1.5 ± 0.1
Reel outside diameter D 178 ± 1
Reel inner diameter D1
Feed hole width D2 13.0 ± 0.20
Sprocke hole position E 1.75 ± 0.10
Punch hole position F 3.50 ± 0.05
Punch hole pitch P 4.00 ± 0.10
Sprocke hole pitch P0 4.00 ± 0.10
Embossment center P1 2.00 ± 0.05
Overall tape thickness T 0.23 ± 0.013
Tape width W 8.10 ± 0.20
Reel width W1
54.4 ± 0.40
12.3 ± 0.20
Label
Top cover tape
Carrier tape
Any additional label if required