Client Project

Wall condition

Project data

Building dimensions

Insulation

Wind loads

Facade panel*

Fixing method*

Company* _____________________________________Address* _____________________________________Client number* _____________________________________Contact person* _____________________________________Phone _____________________________________E-mail _____________________________________Fax _____________________________________

Project name* _____________________________________Address* _____________________________________

Editor name _____________________________________Date of request _____________________________________

Offer deadline* _____________________________________Estimated project start _____________________________________

S2S Slab thickness [mm]* ____________________ Distance between slabs [m]* ____________________Other information _____________________________________

Wind membrane* Thermal conductivity insulation λ [W/mK]** ___________________Target U-value** ___________________

According to customer specification Normal area [B] uplift [kN/m2] ____________________Normal area [B] pressure [kN/m2] ____________________Edge area [A] uplift [kN/m2] ____________________Edge area [A] pressure [kN/m2] ____________________

Producer ________________________________________Dimension [mm] ______ × ______Thickness [mm]* _______________ Weight [kg/m2] _________Orientation Landscape Portrait

Submit form

Concrete Quality [N/mm²] _____ Cracked concrete Quality [N/mm²] _____ Aerated concrete AAC 6 4 2 Steel Type _____________ Thickn. [mm] _____ SFS Type _____________ Thickn. [mm] _____ Timber Type __________ CP-board Thickn. [mm] _____ Solid brick Lime-sand. solid Perf. brick Lime-sand. w. hole Others ___________________________________________________

Type New building RenovationProject status Tendering stage Contract signedFacade area [m2]* ____________________

Building height [m]* ____________________Building width [m] ____________________Building length [m] ____________________

Insulation thickness [mm]* ____________________Producer / type ____________________Insulation fastener ____________________

Terrain category* Rural area Inner city area Outside inner city area Basic wind velocity [m/s] ____________________Altitude [m] ____________________Dist. upwind to shoreline [m] ____________________

Ceramic Metal Fibrecement Terracotta HPL Plaster Timber Other ______________________________

Wall thickness [mm]* ____________________Pull-out value [kN] _________________ FRK

Wall-to-panel distance [mm]* ____________________Non-load-bearing layer thickness [mm]* ____________________Structural fire protection requirements ____________________

With protocol Fixing with X-CR 52 P8 S15

Wall thermal conductivity λ [W/mK]** ____________________

Contact: +43 2627 424 00 34, www.hilti.co.uk* The cells which are marked with a * have to be filled out. ** Only if U-value calculation is needed.

Visible Invisible With rivets / screws With adhesives With stud anchors With undercut anchors With clamps With clamps

Substructure orientation Vertical Horizontal 2-layer

PROJECT DATA SHEET FOR LIGHT VENTILATED FACADE