CDMA BC1 (Primary Antenna) - fccid.io fileCDMA BC1 (Primary Antenna) Frequency: 1880 MHz; Duty...

Click here to load reader

  • date post

    10-Jun-2018
  • Category

    Documents

  • view

    215
  • download

    0

Embed Size (px)

Transcript of CDMA BC1 (Primary Antenna) - fccid.io fileCDMA BC1 (Primary Antenna) Frequency: 1880 MHz; Duty...

  • Test Laboratory: UL CCS SAR Lab B Date: 7/3/2012

    CDMA BC1 (Primary Antenna)

    Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1880 MHz; = 1.382 mho/m; r = 39.345; = 1000 kg/m

    3

    DASY5 Configuration:

    - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1259; Calibrated: 2/13/2012 - Probe: EX3DV4 - SN3686; ConvF(7.51, 7.51, 7.51); Calibrated: 2/16/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM; Type: QD000P40CD; Serial: 1629

    LHS/Touch_RC3 SO55_ch 600/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.835 mW/g

    LHS/Touch_RC3 SO55_ch 600/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 24.729 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 1.0330 SAR(1 g) = 0.714 mW/g; SAR(10 g) = 0.465 mW/g Maximum value of SAR (measured) = 0.850 mW/g

    0 dB = 0.850mW/g = -1.41 dB mW/g

  • Test Laboratory: UL CCS SAR Lab B Date: 7/3/2012

    CDMA BC1 (Primary Antenna)

    Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1880 MHz; = 1.382 mho/m; r = 39.345; = 1000 kg/m

    3

    DASY5 Configuration:

    - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1259; Calibrated: 2/13/2012 - Probe: EX3DV4 - SN3686; ConvF(7.51, 7.51, 7.51); Calibrated: 2/16/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM; Type: QD000P40CD; Serial: 1629

    LHS/Tilt_RC3 SO55_ch 600/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.541 mW/g

    LHS/Tilt_RC3 SO55_ch 600/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 19.889 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.6890 SAR(1 g) = 0.448 mW/g; SAR(10 g) = 0.274 mW/g Maximum value of SAR (measured) = 0.535 mW/g

    0 dB = 0.540mW/g = -5.35 dB mW/g

  • Test Laboratory: UL CCS SAR Lab B Date: 7/3/2012

    CDMA BC1 (Primary Antenna)

    Frequency: 1851.25 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 1851.25 MHz; = 1.354 mho/m; r = 39.427; = 1000 kg/m

    3

    DASY5 Configuration:

    - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1259; Calibrated: 2/13/2012 - Probe: EX3DV4 - SN3686; ConvF(7.51, 7.51, 7.51); Calibrated: 2/16/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM; Type: QD000P40CD; Serial: 1629

    RHS/Touch_RC3 SO55_ch 25/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.150 mW/g

    RHS/Touch_RC3 SO55_ch 25/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 29.194 V/m; Power Drift = -0.0008 dB Peak SAR (extrapolated) = 1.6240 SAR(1 g) = 1.08 mW/g; SAR(10 g) = 0.671 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.308 mW/g

    0 dB = 1.310mW/g = 2.35 dB mW/g

  • Test Laboratory: UL CCS SAR Lab B Date: 7/2/2012

    CDMA BC1 (Primary Antenna)

    Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1880 MHz; = 1.382 mho/m; r = 39.345; = 1000 kg/m

    3

    DASY5 Configuration:

    - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1259; Calibrated: 2/13/2012 - Probe: EX3DV4 - SN3686; ConvF(7.51, 7.51, 7.51); Calibrated: 2/16/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM; Type: QD000P40CD; Serial: 1629

    RHS/Touch_RC3 SO55_ch 600/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.283 mW/g

    RHS/Touch_RC3 SO55_ch 600/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 30.619 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 1.8010 SAR(1 g) = 1.18 mW/g; SAR(10 g) = 0.723 mW/g Maximum value of SAR (measured) = 1.444 mW/g

    0 dB = 1.440mW/g = 3.17 dB mW/g

  • Test Laboratory: UL CCS SAR Lab B Date: 7/2/2012

    CDMA BC1 (Primary Antenna)

    Frequency: 1880 MHz; Duty Cycle: 1:1

    RHS/Touch_RC3 SO55_ch 600/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 1.28 mW/g

  • Test Laboratory: UL CCS SAR Lab B Date: 7/2/2012

    CDMA BC1 (Primary Antenna)

    Frequency: 1908.75 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 1908.75 MHz; = 1.408 mho/m; r = 39.207; = 1000 kg/m

    3

    DASY5 Configuration:

    - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1259; Calibrated: 2/13/2012 - Probe: EX3DV4 - SN3686; ConvF(7.51, 7.51, 7.51); Calibrated: 2/16/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM; Type: QD000P40CD; Serial: 1629

    RHS/Touch_RC3 SO55_ch 1175/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.276 mW/g

    RHS/Touch_RC3 SO55_ch 1175/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 30.433 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 1.8130 SAR(1 g) = 1.17 mW/g; SAR(10 g) = 0.714 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.438 mW/g

    0 dB = 1.440mW/g = 3.17 dB mW/g

  • Test Laboratory: UL CCS SAR Lab B Date: 7/2/2012

    CDMA BC1 (Primary Antenna)

    Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1880 MHz; = 1.382 mho/m; r = 39.345; = 1000 kg/m

    3

    DASY5 Configuration:

    - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1259; Calibrated: 2/13/2012 - Probe: EX3DV4 - SN3686; ConvF(7.51, 7.51, 7.51); Calibrated: 2/16/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM; Type: QD000P40CD; Serial: 1629

    RHS/Tilt_RC3 SO55_ch 600/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.522 mW/g

    RHS/Tilt_RC3 SO55_ch 600/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 19.585 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.6500 SAR(1 g) = 0.429 mW/g; SAR(10 g) = 0.271 mW/g Maximum value of SAR (measured) = 0.512 mW/g

    0 dB = 0.510mW/g = -5.85 dB mW/g

  • Test Laboratory: UL CCS SAR Lab B Date: 7/3/2012

    CDMA BC1 (Secondary Antenna)

    Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1880 MHz; = 1.382 mho/m; r = 39.345; = 1000 kg/m

    3

    DASY5 Configuration:

    - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1259; Calibrated: 2/13/2012 - Probe: EX3DV4 - SN3686; ConvF(7.51, 7.51, 7.51); Calibrated: 2/16/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM; Type: QD000P40CD; Serial: 1629

    LHS/Touch_RC3 SO55_ch 600/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.503 mW/g

    LHS/Touch_RC3 SO55_ch 600/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 19.176 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.8280 SAR(1 g) = 0.428 mW/g; SAR(10 g) = 0.228 mW/g Maximum value of SAR (measured) = 0.571 mW/g

    0 dB = 0.570mW/g = -4.88 dB mW/g

  • Test Laboratory: UL CCS SAR Lab B Date: 7/3/2012

    CDMA BC1 (Secondary Antenna)

    Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1880 MHz; = 1.382 mho/m; r = 39.345; = 1000 kg/m

    3

    DASY5 Configuration:

    - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1259; Calibrated: 2/13/2012 - Probe: EX3DV4 - SN3686; ConvF(7.51, 7.51, 7.51); Calibrated: 2/16/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM; Type: QD000P40CD; Serial: 1629

    LHS/Tilt_RC3 SO55_ch 600/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.545 mW/g

    LHS/Tilt_RC3 SO55_ch 600/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 19.880 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 0.9240 SAR(1 g) = 0.482 mW/g; SAR(10 g) = 0.256 mW/g Maximum value of SAR (measured) = 0.629 mW/g

    0 dB = 0.630mW/g = -4.01