Cardinal 640 - SCD.USA · Cardinal 640 is specially designed for airborne applications requiring...
Embed Size (px)
Transcript of Cardinal 640 - SCD.USA · Cardinal 640 is specially designed for airborne applications requiring...
YOUR VISION IS OUR VISION
Cardinal 640 is SCD's high performance 640 x 512, 15μm pitch InGaAs SWIR detector.
Cardinal 640 is specially designed for airborne applications requiring high F/# optics, including a higher quality window.
Cardinal’s package includes a Thermo Electric Cooler (TEC) that can be utilized for cooling the FPA for low light level scenarios.
Cardinal’s low power proximity board provides the FPA timing and sensitive power supplies. Interface is easy, being similar to the Pelican-D. TEC control electronics are also incorporated.
Cardinal 640640x512, 15 μ µm, InGaAs Detector with digital SNIR ROIC
• High quality SWIR imaging
• Low light level imaging
• Active Imaging
• Airborne Enhanced Vision Systems (EVS)
• Non-Destructive Testing
• High frame rate, Global Shutter
• Low power Camera Link interface
• Low floor noise mode with CTIA stage
• Special features:Two dimensional Laser Range Finder (TLRF)Asynchronous Laser Pulse Detection (ALPD)
Cardinal with proxy electronics
SCD USA / Florida
T (321) 724 6146 / www.scdusa-ir.com [email protected]
SCD Israel / Haifa
T (972) 4 9902535 / www.scd.co.il [email protected]
Typical PerformanceParameter ValueFormat & Pitch 640 x 512, 15μm
Spectral Range 0.6-1.7 (VIS-SWIR)
Quantum Efficiency >80% at 1550nmSee graph below for typical spectral response
Dark current density (Jd) < 1.5 nA/cm2 @ 280K
Pixel Operability > 99.5%
Operating Modes and well capacity High gain (for Low Light Level imaging) – 12Ke Low gain (for high quality daylight imaging) – 0.6Me
Maximum FR at full window (low gain mode)
up to 350 F/s @ 13 bit resolution (80MHz clock rate) Global Shutter
Windowing Flexible, 2 rows step
ROIC Noise (typical) High gain 45e (with CDS) Low gain 180e
FPA Power Dissipation < 100mW @ 60 F/s
Ambient operating temperature -40c to 71c
Package Metallic (vacuum tight) low SWaP, 30x30 mm²
Cooling capability Down to -10C @ 30C environment
Proximity electronics (optional)
Camera Link interfacePower dissipation: < 1.7W @ 60Hz, 25c environment temperature (without TEC)TEC control circuitryFrame CDS supportEMC compatibility to MIL-STD-461C
Specifications are subject to change without notice
0800 1000 1200 1400 1600 1800