BEST DEALS

T H E E S S E N T I A L S

2 0 0 7

Promotion Ends 8/31/07

TESA-HITE MAGNA 400 and 700

• (415 mm) and (715 mm) measuring range• 8 μm /0.0003” accuracy• Automatic diameter measurement using TESA’s patented system

for detecting culmination point• TESA magnetic measuring system (TESA Magna μ System Patented)• Compatible with TESA MICRO-HITE accessories, including measuring

inserts and holder• SCS calibration certificate delivered with each instrument

Part No EDP No. Product List Price Sale Price 00730047 28260 Tesa Hite Magna 400 $3,056.00 $2,647.0000730059 28261 Tesa Hite Magna 700 $3,899.00 $3,410.00

IP67 Digital Electronic Calipers

IP67 Compliant - Unrivaled protection against the penetration of liquid or solid contaminants.• Full protection from oil and coolant splashes, as well as solid particles• Encapsulation of the main components prevents dust, particles of metal,

spraying liquids from entering the caliper• New electronic measuring system protected from liquids and immune

to magnetic fields• Specifications consistent

with DIN 862• Large, 1/4” LC display for

easy reading• Auto shut-off after two hours• Instant inch/metric conversion• Power supply: one 3V lithium

battery, type CR 2032• Battery life: approx. 1.5 years

Catalog No. EDP No. Range Thumbwheel Range List Price Sale Price00530300 29726 TESA-Cal IP67 6”/150 mm $173.00 $121.0000590301 27679 Dura-Cal IP67 • 6”/150 mm $164.00 $121.0000530302 20117 TESA-Cal IP67 • 8”/200 mm $267.00 $240.0000530303 20118 TESA-Cal IP67 • 12”/300 mm $394.00 $355.0000591004 28774 Tool Set: DURA-CAL IP67+ $427.00 $384.00

Micromaster IP54

• Shop-proof technology• Long measuring span and rugged design• Fully protected against:- Water - Oils - Dust

00590301

Save Over

25%

2 3

4 5

TESA IP67 Electronic Calipers

Models with rounded measuring facesfor internal dimensions

Part No EDP No. Product List Price Sale Price 00530221 24724 Electronic Caliper IP67; Data output; 200 mm $374.00 $336.0000530222 24725 Electronic Caliper IP67; Data output; 250 mm $406.00 $365.0000530223 24699 Electronic Caliper IP67; Data output; 300 mm $420.00 $378.00

Models with short cut measuring faces or fixed jaws

TESA IP67 Depth Calipers

Part No EDP No. Product List Price Sale Price00530242 24740 Electronic depth caliper with short

cut measuring face; 250 mm $427.00 $384.00

Brown & Sharpe Shop-Cal Digital Calipers

Catalog No. EDP No. Range Resolution List Price Sale Price00590090 20971 0 - 6” / .0005” / 0.01 mm $114.00 $83.00

0 - 150 mm

INTERAPID LITE Digital CaliperLightweight Aluminum Alloy Frame • Titanium Jaws (O.D.)

• 12” to 120” Sizes• Patented Inductive Measuring System• Resolution: .0005”• INCH/METRIC Conversion• MIN/MAX and PRESET Functions

Max.Catalog EDP Perm. Repeat-No. No. Range Error ability Description List Price Sale Price00590061 23160 12”/330mm 30μm 20μm Interapid light 300 $1,088.00 $980.0000590062 23161 24”/630mm 40μm 20μm Interapid light 600 $1,380.00 $1,242.0000590063 23162 40”/1025mm 60μm 20μm Interapid light 1000 $1,574.00 $1,417.0000590064 23163 60”/1525mm 150μm 20μm Interapid light 1500 $2,629.00 $2,367.0000590065 23164 80”/2040mm 250μm 30μm Interapid light 2000 $3,283.00 $2,995.0000590066 23165 100”/2545mm 350μm 30μm Interapid light 2500 $4,410.00 $3,969.0000590067 23166 120”/3050mm 450μm 40μm Interapid light 3000 $4,925.00 $4,433.00

• Absolute Measuring System• Range: 0-6”/0-150 mm• Resolution: .0005”/0.01 mm• Specifications consistent with DIN 862• Absolute and differential measuring system• A large, 1/4” LC display for easy readings• Auto shut-off• Instant inch/metric conversion• Power supply: 3V lithium-battery,

type CR 2032• Battery life: approx. 1.5 years

Economical Swiss-made quality and design

00590090

Save Over

25%

The Brown & Sharpe Shop-Cal provides easy-to-read, accurate measurements of day-to-day operations. Stainless steel for durable, reliable and accurate measurements.

6 7

Catalog No. EDP Description Range Jaw List SaleNo. Length Price Price

599-579-4 51774 6” Dial-Cal with White Face .001 1.5” $132.00 $89.00599-579-5 51879 6” Dial-Cal with Jet Console, .001 1.5” $132.00 $89.00

Black Face & Orange Hand599-579-8-1 27594 8” Dial-Cal with White Face .001 1.9” $231.00 $139.00599-579-8-5-1 27593 8” Dial-Cal with Jet Console, .001 1.9” $231.00 $139.00

Black Face & Orange Hand599-579-12-1 27592 12” Dial-Cal with White Face .001 2.5” $275.00 $199.00599-579-12-5-1 27591 12” Dial-Cal with Jet Console, .001 2.5” $275.00 $199.00

Black Face & Orange Hand05.60013 42534 Depth Measuring Foot (6” Only) $47.00 $42.0005.60086 27000 Depth Measuring Foot (8” & 12”) $47.00 $42.00

Brown & Sharpe Dial-Cal® Dial CalipersWorld’s First & Finest!

• Tough - Anti-Backlash, Shock-Proof Design• Durable - Covered Stainless Steel Rack• Versatile - Measures Inside, Outside, Depth & Step• Precise - .100”/2mm per Revolution• Reliable - Adjustable Zero Set and Slide Lock• Easy-To-Read - 1.25” Diameter Rotating Dial w/Lock

Brown & Sharpe Centerline Plus Accessory SetFits all Brown & Sharpe and competitive6” Dial, Digital and Vernier Calipers. Jaw attachment slots are manufactured to .140”• Exclusive interchangeable centerline cones• Exclusive 4-48 threaded holes in accessory jaws allow

use of any AGD Standard Point with 4-48 threads• Measure places impossible to reach with a regular

caliper - undercuts, grooves, webs, and shoulders• Cold rolled steel, case hardened with black oxide

plating for long life and corrosion protection• Permanent alignment pin for easy alignment• Supplied in a fitted wooden case

Catalog No. EDP No. List Price Sale Price599-579-200 26908 $115.00 $98.00

Set consists of:(2) Jaw attachments(2) Stem Points 3/8” length x .055” diameter(2) 1/4” diameter disks(2) 3/8” diameter disks

(2) 1/2” diameter disks(2) 3/8” diameter 60 centerline cones(2) 1/2” diameter 60 centerline cones(4) Set screws(1) Hex key.

External Micrometers Micromaster Digital Micrometers

A sleek, ergonomic design and plenty of impressive features, including the new “capa μ system®”, give the Micromaster Digital Micrometer a comfortable advantage in both form and function.• Large, easy-to-read 1/4” digital display• Preset absolute and differential modes• Battery life: 1 to 2 years normal usage• Automatic shut-off after 10 minutes• Meets or exceeds applicable Federal

and DIN standards• Shop-hardened, fitted case

EDP Water RS-232 List SaleCatalog No. No. Range Resistant Output Price PriceDigital Electronic Micrometers599-100 27266 0-1.2”/0-30mm .00016” N N $239.00 $129.00599-125 27271 0-1.2”/0-30mm .00016” Y N $254.00 $191.00599-125RS 27267 0-1.2”/0-30mm .00016” Y Y $260.00 $234.00599-126 27272 1-2”/25-50mm .0002” Y N $307.00 $276.00599-126RS 27268 1-2”/25-50mm .0002” Y Y $311.00 $280.00599-127 27273 2-3”/50-75mm .0002” Y N $319.00 $287.00599-127RS 27269 2-3”/50-75mm .0002” Y Y $323.00 $291.00599-128 27274 3-4”/75-100mm .0002” Y N $334.00 $301.0599-128RS 27270 3-4”/75-100mm .0002” Y Y $356.00 $320.000-3 Inch Set06030029 21235 consisting of Y N $1,072.00 $965.00

599-125, 599-126, 599-127Note: 4” through 12” ranges are also available.

Up To

40%OFF

599-100

Over45%OFF

Value-Line Micrometers - InchBrown & Sharpe micrometers continue as the standard wherever measuring consistency is vital

Features:• Satin-chrome thimble• Spindle lock• .0001” reading• Tungsten carbide

tipped faces• Straight-line graduations.• Fixed/friction thimble• Black enamel frame• Meets Federal specifications

Catalog No. EDP No. Range Graduations List Price Sale Price599-1-44 25943 0 - 1 .0001 in $92.00 $78.00599-2-44 25944 1 - 2 .0001 in $100.00 $85.00599-3-44 25945 2 - 3 .0001 in $101.00 $86.00599-4-44 25946 3 - 4 .0001 in $105.00 $89.00599-5-44 25947 4 - 5 .0001 in $111.00 $94.00599-6-44 25948 5 - 6 .0001 in $119.00 $101.00Metric models also available.Standards are available separately. Individual wood cases are available for 1 to 4” Value-Line micrometers.

Value-LineMicrometer Sets Inch 0-3”, 0-4” and 0-6” Micrometer SetsEach micrometer set includes a fitted wooden case. Micrometers in each set include the standard features listed.

Catalog No. EDP No. Range List Price Sale Price599-181-923 25983 0 - 3 in Without Standards $379.00 $303.00599-181-923-1 25984 0 - 3 in With Standards $413.00 $330.00599-181-924 25985 0 - 4 in Without Standards $509.00 $407.00599-181-924-1 25986 0 - 4 in With Standards $565.00 $452.00599-182-926 25987 0 - 6 in Without Standards $857.00 $686.00599-182-926-1 25988 0 - 6 in With Standards $969.00 $775.00Metric sets also available.0”-12” and 6”-12” Micrometer Sets also available.

ETALON® 260 Micrometers• High precision micrometer designed

for fast, easy reading • Reversible fixed/friction thimble

Part No. EDP No. Range Graduations Accuracy Parallelism List Price Sale Price71.115899 41565 0 - 1 0.0001 2 1 $176.00 $155.0071.115900 41566 1 - 2 0.0001 2 1.5 $277.00 $244.0071.115901 41567 2 - 3 0.0001 3 1.5 $304.00 $268.0071.115902 41568 3 - 4 0.0001 3 1.5 $331.00 $291.00Etalon Metric Models00119046 20008 0-25mm 0.010 mm $57.00 $51.0000119050 20012 ETALON Basic Set 0-100mm $346.00 $311.00

Micrometer Checking SetThe First Complete Set!The Brown & Sharpe Micrometer Checking Set has all the necessary components to check the accuracy of your micrometers, ensuring you that they are performing to theiroptimum specifications• Set assists you in meeting Federal

Specification GGG-C-15c for flatness and parallelism and conforms to MIL-STD-45662A

• Ten-piece selection of gage blocks allows checking of various spindle positions over the complete micrometer range

• Two optical flats: .500” diameter and .5125”diameter which allows checking anvil faces at half revolutions of the spindle for measuring flatness

• Each set and each block is individually serialized• Gage blocks include certificate of calibration• Includes fitted wooden case

Catalog No. EDP Number List Price Sale Price598-10-18 27076 $270.00 $230.00

15%OFF

SAVE

12%

SAVE

15%

8 9

10 11

Micromaster Depth Micrometer

• 3-key functions w/RS-232 data output• Non-rotating spindle• Hardened steel measuring foot faces: 100 x 15mm• Hardened steel meas. rods 3mm dia.• Measuring span 0-90 w/3 rods, 0-180mm w/6 rods

EDP Water RS-232 List SaleCatalog No. No. Range Accuracy Resistant Output Price PriceDigital Electronic Depth Micrometers60.30069 27460 0-3.5”/0-90mm .00016” Y Y $937.00 $825.0060.30070 27461 0-7”/0-180mm .00016” Y Y $1,090.00 $959.00IP54 compliant when RS-232 is not being used.

Internal Analog Depth Gage Micrometers• 1/8 measuring rods• Friction thimble• Ring lock• Hardened precision base• Satin chrome finish• Supplied in a fitted Mahogany case

EDP No. Base List SaleCatalog No. No. Range Graduation Rods Length Price Price599-603-123-3 25624 0-3” .001” 3 2.5” $167.00 $142.00599-603-143-3 25627 0-3” .001” 3 4” $188.00 $141.00599-603-126-3 25625 0-6” .001” 6 2.5” $202.00 $162.00599-603-146-3 25628 0-6” .001” 6 4” $227.00 $193.00

Micromaster Intrimik

Catalog No. EDP No. Range List Pric Sale Price599-290-35-1 27503 0.240-0.320”/6-8 mm $745.00 $656.00599-290-42-1 27504 0.320-0.400”/8-10 mm $745.00 $656.00599-290-50-1 27505 0.400-0.480”/10-12 mm $745.00 $656.00599-290-60-1 27506 0.430-0.550”/11-14 mm $764.00 $672.00599-290-70-1 27507 0.550-0.670”/14-17 mm $764.00 $672.00599-290-80-1 27508 0.670-0.790”/17-20 mm $764.00 $672.00599-290-100-1 27509 0.790-0.990”/20-25 mm $792.00 $697.00599-290-120-1 27510 0.990-1.18”/25-30 mm $792.00 $697.00599-290-140-1 27511 1.18-1.38”/30-35 mm $851.00 $749.00599-290-160-1 27512 1.38-1.58”/35-40 mm $861.00 $758.00599-290-200-1 27513 1.58-1.98”/40-50 mm $871.00 $766.00599-290-240-1 27514 1.98-2.36”/50-60 mm $899.00 $791.00599-290-280-1 27515 2.36-2.76”/60-70 mm $926.00 $815.00599-290-320-1 27516 2.76-3.16”/70-80 mm $940.00 $827.00599-290-360-1 27517 3.16-3.55”/80-90 mm $956.00 $841.00599-290-400-1 27518 3.55-3.95”/90-100 mm $981.00 $863.00599-290-420-1 27519 3.95-4.94”/100-125 mm $1,457.00 $1,282.00599-290-440-1 27520 4.94-5.90”/125-150 mm $1,473.00 $1,296.00599-290-460-1 27521 5.90-6.90”/150-175 mm $1,490.00 $1,311.00599-290-480-1 27522 6.90-7.88”/175-200 mm $1,530.00 $1,346.00599-290-500-1 27523 7.88-8.86”/200-225 mm $1,790.00 $1,575.00599-290-520-1 27524 8.86-9.85”/225-250 mm $1,898.00 $1,670.00599-290-540-1 27525 9.85-10.84”/250-275 mm $1,953.00 $1,719.00599-290-560-1 27526 10.84-11.80”/275-300 mm $2,007.00 $1,766.00

SAVE15%-20%

SAVE

12%

12 13

Micromaster Alesometer

Catalog No. EDP No. Range List Price Sale Price62.90051 28418 0.2362-0.3150”/6-8 mm $968.00 $852.0062.90052 28419 0.3150-0.3970”/8-10 mm $968.00 $852.0062.90023 28420 0.3970-0.4921”/10-12.5 mm $1,091.00 $960.0062.90024 28421 0.4921-0.5905”/12.5-15 mm $1,091.00 $960.0062.90025 28422 0.5905-0.6890”/15-17.5 mm $1,091.00 $960.0062.90026 28423 0.6890-0.7874”/17.5-20 mm $1,091.00 $960.0062.90027 28424 0.7874-0.9843”/20-25 mm $1,110.00 $977.0062.90028 28425 0.9843-1.1811”/25-30 mm $1,110.00 $977.0062.90029 28426 1.1811-1.3780”/30-35 mm $1,110.00 $977.0062.90030 28427 1.3780-1.5748”/35-40 mm $1,110.00 $977.0062.90031 28428 1.5748-1.9685”/40-50 mm $1,203.00 $1,059.0062.90032 28429 1.9685-2.3622”/50-60 mm $1,203.00 $1,059.0062.90033 28430 2.3622-2.7560”/60-70 mm $1,288.00 $1,133.0062.90034 28431 2.7560-3.3465”/70-85 mm $1,288.00 $1,133.0062.90035 28432 3.3465-3.9370”/85-100 mm $1,288.00 $1,133.0062.90036 28433 3.9370-4.9212”/100-125 mm $1,640.00 $1,443.0062.90037 28434 4.9212-5.9055”/125-150 mm $1,775.00 $1,562.0062.90038 28435 5.9055-6.8897”/150-175 mm $1,938.00 $1,705.0062.90039 28436 6.8897-7.8740”/175-200 mm $2,073.00 $1,824.0062.90040 28437 7.8740-8.8582”/200-225 mm $2,207.00 $1,942.0062.90041 28438 8.8582-9.8425”/225-250 mm $2,342.00 $2,061.0062.90042 28439 9.8425-10.8267”/250-275 mm $2,476.00 $2,179.0062.90043 28440 10.8267-11.8110”/275-300 mm $2,610.00 $2,297.00

INTRIMIK Internal Micrometerswith Analog Indication (Inch Models)

Features:• Intrimik measuring arms move at right

angles to the spindle• Analog reading, with graduations as shown

in the table• Instruments in the range .275” to 4.00”

have hardened steel measuring points (770 HV)

• Instruments in the range 4.00” to 12.00” have tungsten carbideinserts in the measuring points (1300 HV)

Measuring Depth (in.) Smallest with Extensions

Catalog No. EDP No. Range Division None One Two List Price Sale Price599-281-3 43972 .275 to .350 .0001 2 6 10 $464.00 $408.00599-281-4 43974 .350 to .425 .0001 2 6 10 $466.00 $410.00599-281-5 43976 .425 to .500 .0001 2 6 10 $469.00 $413.00599-281-6 43978 .500 to .600 .0002 3 9 15 $494.00 $435.00599-281-7 43980 .600 to .700 .0002 3 9 15 $480.00 $422.00599-281-8 43982 .700 to .800 .0002 3 9 15 $492.00 $433.00599-281-10 43984 .800 to 1.000 .0002 3 9 15 $525.00 $462.00599-281-12 43986 1.000 to 1.200 .0002 3 9 15 $531.00 $467.00599-281-14 43988 1.200 to 1.400 .0002 3 9 15 $540.00 $475.00599-281-16 43990 1.400 to 1.600 .0002 3 9 15 $547.00 $481.00599-281-20 43992 1.600 to 2.000 .0002 3 9 15 $622.00 $547.00599-281-24 43994 2.000 to 2.400 .0002 3 9 15 $633.00 $557.00599-281-28 43996 2.400 to 2.800 .0002 3 9 15 $660.00 $581.00599-281-32 43998 2.800 to 3.200 .0002 3 9 15 $671.00 $590.00599-281-36 44000 3.200 to 3.600 .0002 3 9 15 $684.00 $602.00599-281-40 44002 3.600 to 4.000 .0002 3 9 15 $698.00 $614.0000882701 27011 4.000 to 5.000 .0005 4 10 $1,072.00 $943.0000882702 27012 5.000 to 6.000 .0005 4 10 $1,105.00 $972.0000882703 20221 6.000 to 7.000 .0005 4 10 $1,134.00 $998.0000882704 20222 7.000 to 8.000 .0005 4 10 $1,167.00 $1,027.0000883201 * 20223 8.000 to 9.000 .0005 4 10 $1,522.00 $1,339.0000883202 * 20224 9.000 to 10.00 .0005 4 10 $1,572.00 $1,383.0000883203 * 20225 10.00 to 11.00 .0005 4 10 $1,622.00 $1,427.0000883204 * 20226 11.00 to 12.00 .0005 4 10 $1,678.00 $1,477.00* Comes with 6” extension in finished wooden case.

Full setsCatalog No. EDP No. Range List Price Sale Price00880100 20214 .275 - .500” $1,436.00 $1,264.0000880400 20215 .500 - .800” $1,572.00 $1,383.0000881200 20216 .800 - 1.600” $2,332.00 $2,052.0000881900 20217 1.600 - 4.000” $4,293.00 $3,778.0000882700 20218 4.000 - 8.000” $5,713.00 $5,027.00

SAVE

12%SAVE

12%

14 15

Rinseable Bore GageEliminate time spent cleaning bore gages. The rinseable bore gage from Standard Gage can be cleaned without disassembly. The plunger mechanism is completely immersible, making it as easy to clean as it is to use.

• Balanced and lightweight for greater sensitivity and less operator fatigue

• Excellent stability in holding mastered value• Tungsten carbide contacts• Measuring range: 2 in - 8 in / 50 mm - 200 mm• Dial Indicator is shock-proof, and is available in a choice of

graduations. The mechanism is protected by a cast housing• Up to 36 in extensions available• Supplied in black carrying case

Catalog No. EDP No. Range List Price Sale PriceB3-12509 87618 .0001 in $1,348.00 $1,213.00B3-14509 87621 .0005 in $1,339.00 $1,205.00B3-17509 87620 .005 mm $1,339.00 $1,205.00B3-18509 87619 .002 mm $1,515.00 $1,363.00

ETALON PISTOL GRIP Bore GagesSelf-aligning and self-centering bore gages with 3-line contact – All ROCH ALESOTEST are designed for measuring not only blind bores, but also through bores, as well as short centering shoulders, except for the models covering the application ranges from .236 in - 3.936 in / 6 to 10 mm.

• Built for strength, these bore gages are ideally suited for part series inspection on the production floor

• ROCH ALESOTEST are used in conjunction with a value sensor (must be ordered separately). Use of a mechanical or electronic dial gage or axial probe is recommended. Supplied with 3/8” Collett

Catalog No. EDP No. Range List Price Sale Price62.90080 28931 .236-.394 / 6-10 $1,609.00 $1,448.0062.90081 28932 .394-.787 / 10-20 $2,406.00 $2,165.0062.90082 28933 .787-1.575 / 20-40 $2,762.00 $2,486.0062.90083 28934 1.575-2.756 / 40-70 $2,904.00 $2,614.0062.90084 28935 2.756-3.936 / 70-100 $3,115.00 $2,803.00

TESA VERIBOR Light Bore Gauge

Part No EDP No. Product Range List Price Sale Price05790090 29457 Veribor Light 0.70”-1.4” $404.00 $364.0005790091 29458 Veribor Light 1.4”-2.5” $394.00 $355.0005790092 29459 Veribor Light 2.00”-6.00” $454.00 $409.0005790093 29479 Veribor Light 0.70”-6.00” $770.00 $693.00Dial indicator sold separately

05790090 05790091

05790092 05790093

10%OFF

Perform 2-point measurements on bores from .70” to 5.90” using the VERIOBOR Light. Detect form and shape deviations. Virtually clearance free circular articulation ensures high repeatability. Invar stall shaft prevents hand warmth transfer from affecting the measured result.

Centering shoe assures the correct alignment of the gage into the bore being inspected. Hardened steel ball tips offer high resistance to wear.

16 17

Standard Gage Indicators

D1-23226AD1-21221F

The industry’s most popular AGD indicator sizes

Catalog EDP AGD Dial Dial List SaleNo. No. Group Range Reading Diam Marking Price PriceRegular ModelsD1-20141A 33638 1 .025” .0001” 1.75 0-5-0 $250.00 $187.00D1-20241A 33836 2 .025” .0001” 2.25 0-5-0 $202.00 $152.00D1-20126A 33611 1 .075” .0005” 1.75 0-15-0 $273.00 $205.00D1-20226A 33786 2 .075” .0005” 2.25 0-15-0 $165.00 $124.00D1-20111A 33557 1 .250” .001” 1.75 0-50-0 $240.00 $180.00D1-20211A 33705 2 .250” .001” 2.25 0-50-0 $240.00 $180.00Long-Range IndicatorsD5-21221F 86002 2 1.00” .0005” 2.25 0-50 $163.00 $122.001-Rev IndicatorsD1-23226A 86006 2 .020” .0005” 2.25 0-10-0 $273.00 $205.00D1-23241A 34018 2 .008” .0001” 2.25 0-4-0 $215.00 $161.00Metric IndicatorsD1-20261A 33857 2 2.5mm 0.01 mm 2.25 0-50-0 $232.00 $174.00D1-20281A 33886 2 0.5mm 0.002 mm 2.25 0-10-0 $202.00 $151.00

AGD 2 Indicators 2-1/4” Diameter Dial

The AGD 2 series of dial indicatorsare the most popular indicators in the Brown & Sharpe range. All models are supplied with a revolution counter, tolerance pointers, central lug back and ball contact tip as standard.Alternative flat and slide backs are available as accessories.

Catalog EDPNo. No. Series Travel per rev. List Price Sale Price14.82022 26862 MW216 0.10in $90.00 $81.0014.82023 26863 MB216 0.10in $90.00 $81.00

Standard Gage IP54 IndicatorsIP54 – Waterproof protection (Norm IEC 60529)Fully protected against the penetration of liquid or solid contaminants. Dust, particles of metal, spraying water or oil are prevented from entering the indicator.

• Corrosion resistant• High performance, shock-proof design• Hardened steel contact point• Vertical centered lug back• Balanced dial reading• Revolution counter• Tolerance pointers

Catalog No. EDP No. Range Markimg List Price Sale PriceD2-29111F-W 28629 .100 in 0-50-0 $325.00 $293.00D2-29228F-W 28630 .050 in 0-25-0 $325.00 $293.00

D1-20261A

SAVE

25%

10%OFF

18 19

BESTEST Dial Test Indicators - Black Face Models with Orange HandEasy-to-read, satin black, “jet-console” face BesTest® Indicators with high visibility orange hand. Each BesTest® Indicator set comes complete with one carbide tip contact point, .080” diameter; one 1/2” long x .250” diameter extension with dovetail; one contact point wrench; one durable molded case and certifcate of accuracy and traceability.

• Easy-to-read “jet-console” face w/high visibility orange hand

• Constant clockwise rotation• Automatic reversal• Swivelling point• Carbide tip point• Universal mounting• Monoblock (Precision Watch)

body design• Anti-magnetic and corrosion

resistant• Includes fitted case

Catalog EDP Smallest Dial Point Tip List SaleNo. No. Range Marking Division Dia. Length Dia. Price Price599-7029-5 51732 .030” 0-15-0 .001” 1” 1/2” .080” $141.00 $113.00599-7030-5 51733 .030” 0-15-0 .0005” 1” 1/2” .080” $143.00 $114.00599-7031-5 51734 .030” 0-15-0 .0005” 1-1/2” 1/2” .080” $159.00 $119.00599-7032-5 51737 .008” 0-4-0 .0001” 1” 1/2” .080” $192.00 $144.00599-7033-5 51738 .008” 0-4-0 .00005” 1-1/2” 1/2” .080” $203.00 $152.00599-7034-5 51735 .020” 0-10-0 .0005” 1” 1-7/16” .080” $178.00 $134.00599-7035-5 51736 .020” 0-10-0 .0005” 1-1/2” 1-7/16” .080” $195.00 $146.00

INTERAPID Dial Test Indicators• Magnetic resistant• Two-way action – no reversing lever• Dovetail and adjustable stem adaption• Carbide contact point swivels 210° • Extremely low measuring pressure

• Ball bearing and jewelled movement • Precise repetitive readings• Easy-to-read tilted dial• With revolution counter

EDP Dial Dial List SaleCatalog No. No. Series Range Grad. Dia. Reading Price PriceVertical Models74.111377 41685 312b-1V .060” .0005” 1.5” 0-15-0 $237.00 $209.0074.111378 41686 312b-2V .060” .0005” 1.0” 0-15-0 $231.00 $203.0074.111379 41687 312b-20V .060” .001” 1.0” 0-15-0 $215.00 $189.0074.111957 41714 312b-3V .016” .0001” 1.5” 0-4-0 $287.00 $253.0074.111958 41715 312b-15V .060” .0005” 1.5” 0-15-0 $305.00 $268.00Horizontal Models — for measurement at 12°74.111370 42775 312b-1 .060” .0005” 1.5” 0-15-0 $220.00 $194.0074.111371 86150 312b-2 .060” .0005” 1.0” 0-15-0 $218.00 $192.0074.111372 41680 312b-3 .016” .0001” 1.5” 0-4-0 $274.00 $241.0074.111373 41681 312b-4 .016” .0001” 1.5” 0-4-0 $271.00 $238.0074.111374 41682 312b-20 .060” .001” 1.0” 0-15-0 $215.00 $189.0074.111965 41716 312b-15 .060” .0005” 1.5” 0-15-0 $304.00 $268.00Metric Model74.111375 41683 312-1V 0.01mm 1,6mm 37.5mm 0-40-0 $237.00 $209.00

INTERAPID Dial Test IndicatorContact Points and AccessoriesContact Points —Catalog No. EDP No. Tip Dia.Length List Price Sale Price74.105996 41647 .080” 11/16” $17.30 $15.0074.105997 41648 .060” 11/16” $17.30 $15.0074.105998 41649 .031” 11/16” $17.30 $15.0074.111492 41698 .080” 1-3/4” $31.00 $27.0074.111493 41699 .031” 1-3/4” $31.00 $27.0074.111912 41712 .100” 2-3/4” $23.00 $20.0074.111913 41713 .080” 2-3/4” $23.00 $20.00Accessories —Catalog No. EDP No. Description List Price Sale Price74.106331 41651 Height Gage Bar $50.00 $44.0074.106353 86268 Holding Pin $12.00 $10.0074.106931 41656 Axial Support (Inch) $54.00 $48.0074.108603 41663 Universal Clamp $31.00 $27.00

FREEWith

Purchase

2 Brown & SharpeBall Contact PointsAn $88.00 Value

Send proof of purchase toBrown & Sharpe, Inc.TESA Division“Free Contact Points Program”250 Circuit Dr., N. Kingstown, RI 02852-1700

20-25%OFF

SAVE

12%

20 21

Small Size Magnetic BasesMITI-MITE Series

Catalog No. EDP No. Description Size Post Type List Price Sale Price599-7761 44915 Medium Duty 1.25 x 1.25 Ball & with Fine Adjust x 1.75 Socket $82.00 $66.00

Medium Size Magnetic BasesSeries 7746 MAGNICATOR®

Catalog No. EDP No. Description List Price Sale Price599-7746 44908 Magnicator with

fixed upright $147.00 $118.00

Ultra Thin Parallel Set Set of 10 pairs. Supplied in custom molded case• Made from high-grade alloy steel, hardened

and ground from 1/32” stock with 2 holes in each parallel

• 10 pairs, 6” length, 1/32” width• 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”,

1-1/4”, 1-3/8”, 1-1/2”, 1-5/8”• Height specifications relate to consistency within

each pair. Absolute heights are nominal

Catalog No. EDP No. Length List Price Sale Price599-921-20 26884 1/32”W x 6”L $145.00 $116.00

Ultra Precision Parallel SetSet of 10 pairs. Supplied in custom molded case• Made from high-grade alloy steel, hardened

and ground from 1/8” stock with 2 holes in each parallel

• 10 pairs, 6” length, 1/32” width• 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”,

1-3/8”, 1-1/2”, 1-5/8”• Height specifications relate to consistency

within each pair. Absolute heights are nominal

Catalog No. EDP No. Length List Price Sale Price599-921-10 86615 1/8”W x 6”L $263.00 $210.00

Steel Parallel SetSet of 9 pairs. Supplied in custom molded case• Made from high-grade alloy steel, hardened and ground

from 1/4” stock with 2 holes in each parallel• 9 pairs, 6” length, 1/4” width• 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”,

1-5/8”, 1-3/4”• Height specifications relate to consistency within each pair

Catalog No. EDP No. Length List Price Sale Price599-921-4 26882 1/4”W x 6”L $316.00 $253.00

Featuring articulating arm and dovetail clamp with fine adjust-ment, these bases provide precise setting of gage, widely used

for high accuracy measuring with high resolution indicators and electronicgages. Measuring force 400, V diameter 1.18”-5.9”.

INTERAPID® Magnetic Bases

Base Assembly Articulating ArmPart No. EDP No. L W H Demensions (H & L) List Price Sale Price01690030 29432 2.36” 1.97” 2.17” H=12.2” (310mm) L=4.7” (119.38mm) $225.00 $203.0001690031 29433 2.36” 1.97” 2.17” H=15.36” (390mm) L=11” (280mm) $251.00 $226.0001690032 29434 2.36” 1.97” 2.17” H=14.3” (363mm) L=11” (280mm) $319.00 $288.0001690033 29435 1.18” 1.18” 1.18” H=8.07” (205mm) L=7.9” (200.66mm) $382.00 $344.00

01690031 016390032 016390033016390030

20%OFF

22 23

Universal 1-2-3 Block SetUniversal 1-2-3 Blocks Set Consisting of a matched pair of 1”x 2” x 3” blocks, five plated 5/16-18 socket head cap screws and a hex key wrench.

• “Shop-hardened” molded case• Each block is precision ground and case

hardened on all 6 surfaces• Surface finish 6 to 16 microinches• Squareness on all sides to .0001”• There are a total of 11 holes on three faces

Five 5/16 - 18 tapped holes arranged for holding down and for conversion to an angle plate. Six holes drilled through with deep recesses for easy clamping

• Blocks are oversized to allow for normal lapping to .0003”

Catalog No. EDP No. List Price Sale Price599-750-50 27396 $84.00 $62.00

Ultra Precision Ground 1-2-3 Blocks Set Supplied in custom molded case. Ideal for precision layout and setup.• Each block is ground and case hardened on all six surfaces• Surface finish 6 to 16 microinches• Squareness on all sides to .0001”• 23 holes: 5 tapped 3/8-16• Oversized to allow for normal tapping .0001” - .0003”• Case hardened to 50-60 HRC• Set consists of a pair of 1x2x3 inch blocks, five 3/8-16

stainless steel socket head cap screws and a hex key wrench

Catalog No. EDP No. List Price Sale Price599-750-10 26764 $71.00 $53.00

Adjustable Parallel Sets Used for checking, marking, or positioning work.• Handy gages for measuring inside dimensions

of recesses or slots, or for setting tools• Clamp screws lock parallels to size

Catalog EDP No. No. Range No. of Parallels List Price Sale Price599-673-10 44515 3/8” to 1-5/16” 4 $98.00 $74.00599-673-20 44516 3/8” to 2-1/4” 6 $144.00 $108.00

Ultra Precision Wavy Parallel SetUltra Precision Wavy Parallel Set reliable and precise vertical positioning of workpieces.

• Parallel within ±.0002” — paired ±.0002”• Made of high quality spring steel, hardened, stress

relieved and precision ground• Includes 9 pairs 4-1/4” in length, with the following

heights: 1/2”, 5/8”, 3/4”, 7/8”, 1”,1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”• Shims can be compressed, which is useful in the holding thin parts• Complete with fitted wooden case

Catalog No. EDP No. List Price Sale Price599-921-25 27279 $142.00 $107.00

Ultra Precision 12-Piece Angle Block SetComplete with a protective “shop-hardened” molded case.• Precision ground hardened steel• Angular accuracy .0001” per inch,

± 30 arc seconds• 3” long x 1/4” thick• Simple, quick angle setups• Eliminate calculations and avoid errors• Complete set of 12 blocks: 1/4°, 1/2°,

1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30°Catalog No. EDP No. List Price Sale Price599-921-18 26883 $208.00 $156.00

Workshop Square SetComplete in a shop-hardened, protective molded case!• Squareness of the blade edge to the

working face of stock is .0006”

Catalog No. EDP No. Description Blades List Price Sale Price599-540-246 27061 3-Pc. Square Set 2”, 4”, & 6” $70.00 $53.00599-540-2346 27060 4-Pc. Square Set 2”, 3”, 4”, & 6” $87.00 $65.00

Tapped Holes

Up To

26%OFF

Save

25%

24 25

Jack Screw Utility SetComplete in a shop-hardened, protective molded caseUse the Jack Screw Utility Set when you are setting up machinery and in other machine shop applications. Perfect for leveling work on planer beds and upright drills.

Catalog No. EDP No. List Price Sale Price599-680 27421 $29.00 $22.00

Edge Finders & Audible Edge FindersAudible Edge Finders help assure accuracy by releasing an audible click when the tip jumps. This allows the operator to listen as well as watch the tool.• Available in three sizes: 1/2”, 3/8”, and 10mm• Hardened and ground on all working surfaces

Catalog No.Edge Finders EDP No. End Size List Price Sale Price599-792-2 27030 S 3/8” x .200” $11.90 $9.00599-792-3 27031 S 1/2” x .200” $12.70 $10.00599-792-4 27032 D 3/8” x .200” $15.90 $12.00599-792-5 27033 D 1/2” x .200” $16.40 $12.00599-792-11 27036 S 10mm x .375 x 10mm $14.20 $11.00599-792-12 27037 S 10mm x 10mm $14.20 $11.00599-792 44595 S 1/2” x .500” $12.70 $10.00Audible Edge Finders599-792-20 27038 S 3/8” x .200” $14.20 $11.00599-792-21 27039 S 1/2” x .200” $15.00 $11.00599-792-22 27040 S 10mm x .375” x 10mm $16.40 $12.00599-792-23 27041 S 10mm x 10mm $16.40 $12.00599-792-24 27042 S 1/2” x .500” $15.00 $11.00Edge Finder Set599-792-9 28447 1/4”, 3/8”, 1/2”, 3/4” $53.00 $45.00Audible Edge Finder Set599-792-19 28448 1/4”, 3/8”, 1/2”, 3/4” $62.00 $53.00

Telescoping Hole Gages

Telescoping Hole GagesSatin-chrome finishCompletely assembled with handle. Knurled lock maintains the setting of the measuring arms to permit sizing with a micrometer or caliper.4 Piece Set:• Range: 5/16” to 2-1/8” diameter6 Piece Set:• Range: 5/16” to 6” diameter

Catalog No. EDP No. Description Range List Price Sale Price599-591-10 45368 4 Piece Set 5/16” to 2-1/8” dia. $98.00 $74.00599-591-20 45369 6 Piece Set 5/16” to 6” dia. $129.00 $97.00

Sine Bar Riser Kit and Value-Line 5”Quickly measure the desired angle in a machine setupSine Bar:• 5”, hardened and precision ground• 1” body size, top parallel to bottom

of rods within .0002”Risers:• 18 risers from 1/2° to 15°, 1/4°

and 1/2° T.P.F.• Exact constant within .0001

Catalog No. EDP No. Description List Price Sale Price598-291-600 27264 Sine Bar Riser Kit $171.00 $128.00598-291-500 29686 5” Sine Bar (only) $52.00 $38.00

SaveUp To

25%SaveOver

20%

26 27

Titanium Plated Square Set

• 12” blade length, 4R graduation• Tin Coated for extra wear resistance• Complete with plastic blow molded

storage case

Catalog No. EDP No. Blade Size List Price Sale Price599-401-1204T 27417 12”/4R Grad. $108.00 $89.00

Combination Square SetsIndustry’s most versatile tool

Combination squares are commonly used for layout, setup, checking heights and depths and setting angles. They are also often used as try squares, center gages, bevel protractors and rules.• Square heads and

protractors are supplied with levels• Square heads also include a hardened steel scriber• Square heads and center heads are made from hardened steel• Inch, metric or inch/metric reading combination squares

are availableComponents may be purchased separately.

EDP Blade List SaleCatalog No. No. Size Includes Price Price599-400-1204-1* 44159 12” Square Head (Hardened) $134.00 $101.00

Center Head (Hardened)599-438-1204-1* 44193 12” Square Head (Hardened) $213.00 $160.00

Center Head (Hardened) Protractor (Reversible)

Satin Chrome Blade.All blades graduated in, 8ths, 16ths, 32nds, and 64ths.

TESA Spacer 100/200

Spacer 100 Spacer 200 Leica DistoAccuracy 1/8” 3/32” 1/16”Maximum Distance 350 Feet 650 Feet 650 FeetViewfinder No Yes YesAdd and SubtractMeasurements Yes Yes YesPocket Sized Yes No NoTimer Function No Yes YesBacklit Display Yes Yes YesTripod Mount No Yes Yes

• Easy-to-use, pocket-size laser gage for distances.• Shortcut keys for addition, subtraction, surface

and volume calculations• Measure both highest and

lowest distance values

Catalog EDP Description List SaleNo. No. Price Price01130010 24721 TESA SPACER 100 $399.00 $360.0001130020 24722 TESA SPACER 200 $521.00 $470.0001130025 28504 LEICA DISTO A6 $819.00 $738.00

Leica DistoThe Original Laser Distance Meter

Over

15%OFF

25%OFF

PMI-916 2/07

World Headquarters

250 Circuit Dr., North Kingstown, RI 02852-1700Tel: (800) 283-3600 Select option 3, then option 2 Fax: (401) 886-2553

www.brownandsharpe.com

Order Yours Today!The New Advanced Metrology Products Brochure(Order number PMI-917)