α Base Station Specification

Copyright © 2016 SENSORO All rights reserved.

1. Product Overview

01

α Base Station by SENSORO, featuring excellent outdoor signal

coverage and strong hardware protection, is designed and built for

outdoor IoT application scenarios that require low power-

consumption, long range and low throughput, hence capable of

handling the data communication of a large-scale sensing

network. As the core infrastructure of the SENSORO LPWAN, its

powerful data processing capability is designed to support and

connect thousands of nodes into the IoT-WAN and provide a data

path from the nodes all the way to the cloud.

This IoT base station supports multiple communication modes to

servers (3G, Ethernet etc.) for flexibility to adapt to various scenes;

multi-network hot backup is also available to improve reliability and

stability in data communication.

02

• Terminal Device TD through IoT-WAN to upload

data to the IoT Base Station • Terminal Device upload data to multiple base stations

in the same network• IoT Base Station transfer the data from TD to cloud

through a variety of network mode e.g. Ethernet/

3G

• Cloud could monitor the status of the TD, sensing

data and even manage the terminal equipment for

different application• Cloud dynamically optimize the network(IoT-WAN),

and improve the stability and reliability of network

communication

2. Product Features

03

Enterprise IoT-WAN

Ultra long-range wireless signal coverage

Long-range wireless data feed with low power nodes

Multi-channel parallel data processing capability to support thousands of nodes

Dynamic network optimization designed for stability and high performance in communication

Data rate 200bps 5Kbps

Industrial Grade Protection

High grade full metal material, overall thermal design, -40℃ +65℃ wide-range operating temperature

Industrial grade IP67 protection(e.g. water/dust-resistant)

Built-in lightning protection

Design for high reliability

Multi network hot backup options to ensure stability in data communication

Backup power supply available for emergency cases

Multi built-in sensors for remote monitoring of base station operation

Exception monitoring & self- recovery function

Remote system upgrade

Security Tri-layer encryption to ensure data security

3. Hardware Specification

04

Physical Information

Dimensions L x W x H 120mm x 120mm x 260mm

Weight 2.5Kg

Interface

WAN port: 10/100M Base Ethernet, autosensing (RJ45)

Management console port (RJ45) with Reset button

Antenna N-Type Female Connector x 4

Multicolor LED System status indicator

PowerPower input Power over Ethernet (PoE) (802.3af)

Power Consumption 13W

Sensor

Temperature Sensor × 2

Gyroscope × 1

Ambient Light Sensor × 1

EnvironmentOperating Temperature -40℃ +65℃ for Base Station ( Outdoor )

0℃ +40℃ for PoE Adapter ( Indoor )

Storage Temperature-40℃ +80℃ for Base Station -20℃ +80℃ for PoE Adapter

05

Operating Humidity 5% 90% (non-condensing)

Storage Humidity 5% 90% (non-condensing)

IP Grade IP67

Wind resistance 165MPH

Operating altitude -60 3000m

Atmospheric pressure 53kPa 106kPa

Radio specifications

IoT-WAN x 2

Antenna type External antenna

Maximum transmit power 24dBm

Receiver sensitivity

-141dBm @ 200bps,433MHz-135dBm @ 900bps,433MHz-126dBm @ 5000bps,433MHz-140dBm @ 200bps,868MHz-135dBm @ 900bps,868MHz-125dBm @ 5000bps, 868MHz-140dBm @ 200bps,915MHz-135dBm @ 900bps,915MHz-125dBm @ 5000bps, 915MHz

06

Cellular and Wireless

Antenna type External antenna

Maximum transmit power 24dBm

Receiver sensitivity -110dBm @ UMTS 800/850 Band V; -110dBm @ UMTS 900 Band VIII-109dBm @ UMTS 1900 Band II; -110dBm @ UMTS 2100 Band I

BLE

Antenna type Internal antenna

Maximum transmit power 4dBm

Receiver sensitivity-96.0dBm @ 250Kbps-93.0dBm @ 1Mbps BLE-90.0dBm @ 1Mbps

GNSS

Antenna type External antenna

Receiver sensitivity -165dBm@Tracking-148dBm@Acquisition

Antenna specifications

IoT-WAN x 2

Fewquency band(MHz) 433MHz / 868MHz / 915MHz

07

VSWR < 2.5

Gain 5dBi

Polarization Linear

Cellular and Wireless

Frequency band(MHz) GSM/GPRS/EDGE ( 850,900,1800,1900MHz)UMTS/HSPA ( B1,B2,B5,B8 )

VSWR < 1.8

Gain 5dBi

Polarization Linear

BLE

Frequency band(MHz) 2.4GHz

VSWR < 2.5

Gain 0.9dBi

Polarization Linear

08

GNSS

Fewquency band(MHz) BD B1/GPS L1/GALILEO/QZSS

VSWR < 2

Gain 5dBi

Polarization Linear

Network features

Ethernet Compliance with IEE802.3uSupport DHCP Client, obtain IP address automatically

Cellular and WirelessGSM/GPRS/EDGE ( 850,900,1800,1900MHz)UMTS/HSPA ( B1,B2,B5,B8 )

4. Compliance & Standards

09

Safety

UL 60950–1UL 60950–22CAN/CSA 22.2 No.60950-1CAN/CSA 22.2 No.60950-22 IEC 60950–1IEC 60950–22 EN 60950–1 EN 60950–22GB/T 4943.1

Radio approvals

ETSI EN 300 328FCC Part 15C: 15.247 RSS-210AS/NZS 4268FCC Part 15.107 and 15.109

10

EMC

ETSI EN 301 489–1 FCC Part 15 ICES-003 YD/T 1312.2-2004ITU k.21GB/T 9254AS/NZS CIPSR22 EN 55022 EN 55024 CISPR 22 CISPR 24 IEC61000-4-6 IEC61000-4-2

IEEEIEEE802.3IEEE802.3 af

11

Environmental

ETSI 300 019-2-1 ETSI 300 019-2-2 ETSI 300 019-2-4 IEC 60068-2-52 ETSI 300 019-1-1 ETSI 300 019-1-2 ETSI 300 019-1-4

EMF

CENELEC EN 62311 CENELEC EN 50385 FCC Bulletin OET65RSS-102 FCC Part1&2 FCC KDBseries

RoHS Directive 2002/95/EC & 2011/65/EU

Copyright © 2016 SENSORO All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of SENSORO.

General DisclaimerThe information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating results, future product portfolio, new technology, etc. There are a number of factors that could cause actual results and developments to differ materially from those expressed or implied in the predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an offer nor an acceptance. SENSORO may change the information at any time without notice.