Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No....

28
Cable pull WS7 TF-WS7-PULL TFWS7PULL03.01 Assembly and operating instructions

Transcript of Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No....

Page 1: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS7 TF-WS7-PULL

TFWS7PULL03.01

Assembly and operating instructions

Page 2: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS72

Page 3: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS7 3

Dear Customer,

Thank you for deciding for a high-quality training equipment of the brand Taurus, the brand that makes athlete‘s hearts beat faster. Taurus offers a wide range of home fitness equipment like elliptical cross trainers, ergometers, treadmills and rowing machines. Taurus equipment is the optimal equipment for all those who want to train at home independent of goals and fitness level. For further information please visit www.sport-tiedje.com or www.taurus-fitness.de.

SAFETY NOTICE

Please read all of the instructions carefully before assembly and first use. These instructions are intended to ensure speedy assembly and explain safe usage. Make sure that all people exercising with the

equipment (in particular children and persons with limited physical, sensory, mental or motor capabilities) are informed about these instructions and its content in advance. In case of doubt, a responsible person must supervise the use of the equipment.

This equipment has been manufactured according to the latest safety knowledge. As far as possible, potential safety hazards which could cause injury have been eliminated. Make sure to follow the instructions carefully and that all parts are securely in place. If required, read through the instructions again to correct any mistakes.

Please pay close attention to the safety and maintenance instructions given here. The contract partner cannot be held liable for damage to health, accidents or damage to the equipment when it is not used in accordance with these instructions.

The equipment is only suitable for use at home. The equipment is not suitable for semi-professional (e. g., hospitals, clubs, hotels, schools, etc.) and commercial or professional use (e. g., health clubs).

Retain these instructions in a safe place for future reference, maintenance or when ordering replacement parts.

Page 4: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS74

Page 5: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS7 5

CONTENTS

1 GENERAL INFORMATION 6

1.1 Technical data 6

2 ASSEMBLY 7 3 ORDERING SPARE PARTS 23

3.1 Service hotline 233.2 Serial number and model name 233.3 Parts list 243.4 Exploded drawing 26

Page 6: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS76

1 GENERAL INFORMATION

1.1 Technical data

Weight and dimensions:

Item weight (gross, incl. packaging): 40 kgItem weight (net, without packaging): 35 kg

Packed dimensions (length x width x height): approx. 1935 mm x 420 mm x 215 mm

Set-up dimensions with Multi-gym WS7 (length x width x height): approx. 225 cm x 172 cm x 213 cm

Maximum user weight: 150 kg/330 lbs

Page 7: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS7 7

2 ASSEMBLY

We recommend that you do not completely tighten the screws and bolts at first in order to make the assembly of the training machine easier. However, please make sure that all screws and bolts are tightened once the assembly is done.

Screws and cables overview

Page 8: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS78

Page 9: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS7 9

Step 1: Exploded drawing

No. Description Note Qty.

20 washer Φ12 14

21 lock nut M12 6

128 connection plate 3

130 spring washer Φ12 2

131 hexagon bolt M12*30 2

132 hexagon bolt M12*80 6

164 connection tube 1

165 pull cable tower back connection tube 1

166 side ground frame 1

Page 10: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS710

Step 1: Assembly

1.Mount the front connecting tube (164) with two screws M12*30 (131), M12 spring washers (130), and M12 washers (20) on the main frame.

2. Mount the rear connecting tube (164) with two screws M12*80 (132), M12 washers (20), M12 lock nuts (21), and the connecting plate (128) on the main frame.

3. Mount the lateral main frame (166) with four screws M12*80 (132), M12 washers (20), M12 lock nuts (21), and connecting plates (128) on the front and rear connecting tube.

1.

Page 11: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS7 11

Step 2: Exploded drawing

No. Description Note Qty.

5 washer Φ10 4

20 washer Φ12 8

21 lock nut M12 4

23 lock nut M10 2

43 hexagon bolt M10*70 2

129 arc-shaped 1

131 hexagon bolt M12*30 2

132 hexagon bolt M12*80 2

167 sliding sleeve 1

168 T shape pull pin Φ10 1

No. Description Note Qty.

169 guide tube 1

170 side standing tube 1

171 side elbow tube 1

Page 12: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS712

Step 2: Assembly

1. Mount the guide rod (169) with two M10*70 screws (43), M10 washers (5), and M10 lock nuts on the lateral main frame.

2. Slide the cable pull roller (167) on the guide rod (169) and screw the T-shaped lock pin (168) on it.

3. Mount the lateral standpipe (170) with M10*125 screws (133), M12 nuts (21), M12 washers (20), and the connecting plate (129) on the lateral main frame.

4. Mount the lateral angled tube (171) with M12*30 screws (131), M12 washers (20), and M12 lock nuts (21) on the lateral standpipe (170) and the right cover.

Page 13: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS7 13

Step 3: Exploded drawing

No. Description Note Qty.

5 washer Φ10 14

23 lock nut M10 7

65 hexagon bolt M10*75 7

172 pull cable tower pulley Φ14*50 2

173 pull cable tower cover 1

174 pull cable tower cover 1

Page 14: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS714

Step 3: Assembly

1. Mount the covers of the cable tower (173, 174) with M10*75 screws (65), M10 washers (5), and M10 nuts (23) on the guide rod, lateral standpipe, and lateral angled tube.

2. Mount the M14*50 shafts (172) with M10*75 screws (65), M10 washers (5), and M10 nuts (23) on the covers of the cable tower (173, 174).

Page 15: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS7 15

Step 4: Exploded drawing

No. Description Note Qty.

5 washer Φ10 8

23 lock nut M10 4

52 hexagon bolt M10*45 1

55 pulley Φ95*26 4

175 hexagon bolt M10*80 3

176 pulley spacer Φ20*Φ 6

Page 16: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS716

Step 4: Assembly

1. Mount three pulleys (55) with M10*80 screws (175), M10 washers (5), and M10 nuts (23) on the marked points between the covers of the cable tower.

2. Mount the pulley (55) with a M10*45 screw (52), M10 washer (5), and M10 nut (23) below the lateral main frame.

Page 17: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS7 17

Step 5: Exploded drawing

No. Description Note Qty.

5 washer Φ10 8

23 lock nut M10 5

30 hexagon bolt M10*25 1

52 hexagon bolt M10*45 5

55 pulley Φ95*26 4

59 cable hook 1

142 hexagon bolt 1

177 pulley catch plate M10*50 1

178 movable pulley frame 1

179 pull cable tower short L:5625mm 1

Page 18: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS718

TF-WS7-PULL

TF-WS7-ATT

Step 5: Exploded drawing

Page 19: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS7 19

Step 5: Assembly

1. Replace the cable (70) of step 13 by the cable (179). Pull the cable (179) through the same guiding path like in step 13. Mount the flat, short cable end of the cable tower (179) with M10*25 screw (30), M10 washer (5), and M10 nut (23) on the lateral main frame.

2. Mount the pulley (55) with M10*45 screw (52), M10 washer (5), and M10 nut (23).

3. Mount the pulley (55) with M10*50 screw (142), M10 washer (5), M10 nut (23), and guide hook (177).

4. Connect the cable of the cable tower (179) through M12 washer (20) with the mobile pulley frame (178).

5. Mount the pulley (55) with M10*45 screw (52), M10 washer (5), and M10 nut (23) on the mobile pulley frame (178).

Page 20: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS720

Step 6: Exploded drawing

No. Description Note Qty.

5 washer Φ10 2

23 lock nut M10 1

30 hexagon bolt M10*25 1

60 9 link chain & snap hook 1

85 handle belt 1

180 pull cable tower long L:7290mm 1

Page 21: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS7 21

Step 6: Exploded drawing

Page 22: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS722

Step 6: Assembly

1. Mount the flat long cable end of the cable tower (180) with M10*25 screw (52), M10 washer (5), and M10 nut (23) on point D.

2. Remove the end of the ball-shaped head on the long cable of the cable tower (180).

3. Now pull the long cable of the cable tower (180) through the points, starting from D, in the order E, F, G, H, I, J, see cable drawing.

4. Mount the end of the ball-shaped head back again on the cable.

5. Hang nine link chains and snap hooks (60) with one end on the hand strap (85) and with the other end on the long cable of the cable tower (180).

Page 23: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS7 23

3 ORDERING SPARE PARTS

3.1 Service hotline

So that we can give you the best possible service, please have your model name, part number, serial number, exploded drawing and parts list ready.

SERVICE-HOTLINE

3.2 Serial number and model name

Before assembling your equipment, find the serial number on the white sticker and enter it in the appropriate space.

Serial number:

Brand / category: Model name:

Tarus cable pull WS7-PULL

+31 172 619961

[email protected]. - Do. 9:00 - 17:00 Vr. 9:00 - 21:00Za. 10:00 - 17:00

+33 (0) 172 770033

+49 4621 4210-933

[email protected]. - Ven. 8:00 - 18:00 Sam. 9:00 - 18:00

80 90 16 50

+49 4621 4210-945

[email protected]. - Fr. 8:00 - 18:00 Lø. 9:00 - 18:00

+44 141 876 3972

[email protected]

Mon. - Fri. 9:00 - 17:00

+49 4621 4210-0

[email protected] - Fri 8:00 - 18:00 Sat 9:00 - 18:00

+49 4621 4210-0

+49 4621 [email protected]

Mo. - Fr. 8:00 - 18:00Sa. 9:00 - 18:00

DE

NL

DK

UK

FR

INT

Page 24: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS724

3.3 Parts list

No Description Dimensions Qty.

5 washer Φ10 42

7 spring washer Φ10 2

20 washer Φ12 23

21 lock nut M12 10

23 lock nut M10 20

30 hexagon bolt M10*25 4

43 hexagon bolt M10*70 2

52 hexagon bolt M10*45 3

55 pulley Φ95*26 9

59 cable hook 1

60 9 link chain & snap hook 1

65 hexagon bolt M10*75 7

85 handle belt 1

89 foot margin cover Φ120 2

90 ball head tube plug Φ50 1

92 oval tube plug 50-100 1

128 connection plate 3

129 arc-shaped connection plate 1

130 spring washer Φ12 2

131 hexagon bolt M12*30 4

132 hexagon bolt M12*80 6

133 hexagon bolt M12*125 2

142 hexagon bolt M10*50 3

164 connection tube 1

165 pull cable tower back connection tube 1

166 side ground frame 1

167 sliding sleeve 1

168 T shape pull pin Φ10 1

169 guide tube 1

170 side standing tube 1

171 side elbow tube 1

172 pull cable tower pulley support tube Φ14*50 2

Page 25: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS7 25

No Description Dimensions Qty.

173 pull cable tower cover left 1

174 pull cable tower cover right 1

175 hexagon bolt M10*80 3

176 pulley spacer Φ20*Φ10.5*19.5 6

177 pulley catch plate 1

178 movable pulley frame 1

179 pull cable tower short cable L:5625mm 1

180 pull cable tower long cable L:7290mm 1

181 powder metallurgy sleeve Φ33*Φ20*18 2

182 stationary shaft Φ20*74*M10 1

183 reduction sleeve Φ60*50 2

184 pulley rotating sleeve 1

185 sliding sleeve tube 1

Page 26: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS726

3.4 Exploded drawing

Page 27: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS7 27

CONTACT

Company head officeSport-Tiedje GmbHFlensburger Str. 5524837 SchleswigGermany

Hotline for Technical Information

DISCLAIMER

©2011 TAURUS is a registered brand of the company Sport-Tiedje GmbH. All rights reserved. Any use of this trademark without the explicit written permission of Sport-Tiedje is prohibited.

Product and instructions are subject to change. Technical data can be changed without advance notice.

+31 172 619961

[email protected]

+33 (0) 172 770033

+49 4621 4210-933

[email protected]

80 90 16 50

+49 4621 4210-945

[email protected]

+44 141 876 3986

[email protected]

+49 4621 4210-0

[email protected]

www.sport-tiedje.comwww.taurus-fitness.de

+49 4621 4210-0

+49 4621 [email protected]

DE

NL

DK

UK

FR

INT

Please find a detailed overview including address and opening hours for all specialist fitness stores of the Sport-Tiedje Group in Germany and abroad on the following website.

www.sport-tiedje.com/en/stores

Page 28: Assembly and operating instructions - Sport-TiedjeBCMF QVMM 84 11 Step 2: Exploded drawing No. Description Note Qty. 5 washer Φ10 4 20 washer Φ12 8 21 lock nut M12 4 23 lock nut

Cable pull WS7