Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for...

36

Transcript of Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for...

Page 1: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.
Page 2: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.
Page 3: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

40Ar* = 40Artot - 36Ar (40Ar/36Ar)air- [38Ar (40Ar/38Ar)spk]

(40Ar/36Ar)air = 298.7 ± 0.1(used to be 295.5)

Page 4: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.
Page 5: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

Swindle et al., 1995

Page 6: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.
Page 7: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.
Page 8: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.
Page 9: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.
Page 10: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.
Page 11: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

40Ar/39Ar

main advantages:1. measurement of P and D in same aliquot2. get domain/zonation information

3919K(n,p)39

18Ar

or

3919K + 10n → 39

18Ar + 11H

neutrons have to be "fast"...(high E, >~0.1 MeV)

Page 12: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.
Page 13: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

Φ (ε) = flux density of neutrons of energy εσ (ε) = capture cross-section of neutrons of energy ε∆ t = duration of irradiation

[=] (nV)/(cm2s)[=] barns

Page 14: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

where ts is age of standard

so, for an unknown...

measured on standard

Page 15: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.
Page 16: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

40K (n,p) 40Ar40Ca (n,nα) 36Ar42Ca (n,α) 39Ar

can minimize to some degree by positioning in reactor......but in reality need to make corrections.

Page 17: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

40K (n,p) 40Ar

irradiate a sample with high K and no Ar (e.g., K2SO4 or K-doped glass), then measure 40Ar in it. Then correction

(40Ar/39Ar)K = (40Ar/39Ar)m - (36Ar/39Ar)m (40Ar/36Ar)air

or

(40Ar/39Ar)K = (40Ar/39Ar)m - (36Ar/39Ar)m x 298.6

as measured in the K-doped glass

Page 18: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

40Ca (n,nα) 36Ar

• especially important for samples with high Ca/K, like hornblende, plagioclase

• critical because 36Ar is used for atmospheric contamination• related reaction also makes 37Ar

40Ca (n,nα) 36Ar40Ca (n,α) 37Ar

So, just irradiate CaF2, and measure

(36Ar/37Ar)Ca = (36Ar/37Ar)m - (40Ar/37Ar)m (36Ar/40Ar)air

or

(36Ar/37Ar)Ca = (36Ar/37Ar)m - (40Ar/37Ar)m x 1/298.6

as measured in the CaF2

but be careful, because 37Ar has t1/2 ~ 35 days!

Page 19: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

42Ca (n,α) 39Ar

in Ca salt, both 39Ar and 37Ar are produced from Ca, so (39Ar/37Ar)Ca is a direct measurement on the Ca-salt

Page 20: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

40Ar*/39ArK = (40Ar/39Ar)m - 298(36Ar/39Ar)m+298(36Ar/37Ar)Ca(37Ar/39Ar)m

1-(39Ar/37Ar)Ca(37Ar/39Ar)m

-[40Ar/39Ar]K

• atmospheric correction• 36Ar from 40Ca during irradiation• 39Ar from 42Ca during irradiation• 40Ar from 40K during irradiation

also• need to adjust all values for mass discrimination effects• need to recognize that extraterrestrial samples have different atmospheric

compositions (and cosmogenic ones)

Page 21: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

other reactions to worry about

1) 35Cl (n,γ) 36Cl → 36Ar t1/2 = 300,000 a2) 37Cl (n,γ) 38Cl → 38Ar t1/2 = 37.3 min

1) If you have high Cl/Ar samples (e.g., hornblende) and wait ~ a year before analyzing them, this can be a few percent problem

2) Will mostly have decayed by time of analysis, so a) can get Cl content of sample (or step) from 38Ar... (often correlated with excess 40Ar)b) can correct for 36Ar from 36Cl (from 35Cl)

Page 22: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.
Page 23: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

Kelley and Wartho, 2000

McDougall & Harrison, 1999

Page 24: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

1) Simple, closed-system behavior

plateaux: no single definition, but typically >4-5 steps that agree within 95% confidence and represent >50% of gas released

Page 25: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

1) Conventional isochrondispersion of points along line is due to not just different P/D, but also mixing with trapped component and radiogenic Ar

drawbacks to conventional isochron: 1) 36Ar is measured with lowest precision (only 0.337% of Ar, typically)2) "open-ended" (steps with lots of radiogenic 40Ar plot way out and dominate regression, precluding precise determination of trapped component

Page 26: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

Inverse isochron

(40Ar*/39Ar)=(1/J)*(elt-1)

Deviations from line can result from 40Ar* loss (e.g., slow cooling or reheating) and/or multiple trapped components.

Page 27: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

2. Excess Ar and the Trapped Component

Non-ideal spectrumTrapped component has higher 40Ar/36Ar than atmosphere

Page 28: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

2. Excess Ar and the Trapped Component

Being smart about the trapped component MAY allow you insight into complex step-heating spectra

Page 29: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

Pattern of step-heating spectrum can identify and mitigate excess 40Ar(sometimes)

Page 30: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

1) 35Cl (n,γ) 36Cl → 36Ar t1/2 = 300,000 a2) 37Cl (n,γ) 38Cl → 38Ar t1/2 = 37.3 min

Excess 40Ar and anomalous Cl are often correlated.

Page 31: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

3. Open-system complex behavior

Ar can move around in samples prior to to analysis

If this happens via thermally-activated volume diffusion, we can make sense of it.

Page 32: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

small anomalously high peak in terrestrial craters 450-480 Ma (Schmitz et al., 2001)

The Ordovician L-chondrite event

most L-chondrites have high-T cooling ages of 465-500 Ma;

peak: 470 ± 6 Ma (Korochantseva et al., 2006)

Swindle, 2014

Page 33: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

Ordovician L-chondrite event: The stratigraphic record

Schmitz et al. (2019)

Page 34: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

Ordovician L-chondrite event: The fossil meteorite and ET spinel record

Schmitz et al. (2013; 2015)

Page 35: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

Ordovician L-chondrite event: Cosmogenic 21Ne in fossil meteorites

Schmitz et al., 2015

Page 36: Arreiners/geos474-574/GT19 K-Ar and Ar-Ar 1.pdf40. Ca (n,n. α) 36. Ar • especially important for samples with high Ca/K, like hornblende, plagioclase • critical because . 36.

Schmitz et al., 2008

Ordovician L-chondrite event: The fossil meteorite and ET spinel record

estimated flux increase ~10-200x