3SAE Standard Diameter Fiber Cleaver (SFC) 3SAE Standard Diameter Fiber Cleaver is an advanced...

2
3SAE Standard Diameter Fiber Cleaver (SFC) The 3SAE Standard Diameter Fiber Cleaver is an advanced electronic fiber cleaver for fibers up to 220 μm. The cleaver is specifically designed for use in production lines where ease-of-use, process speed and a high production yield is crucial. The cleaver is at the same time well suited for R&D environments. The 3SAE Standard Diameter Fiber Cleaver is utilizing an advanced ultrasonic diamond scribe technology to achieve optimal cleave performance and consistency. The cleaver generates very flat end-faces and low cleave angles (typical <0.5°) with a high repeatability. The 3SAE Standard Diameter Fiber Cleaver has an unique and universal clamping mechanism which is self adjusting to the fiber diameter applied, no external parts or accessories are required. The 3SAE Standard Diameter Fiber Cleaver is powered from an external power supply or the built in rechargeable battery. The 3SAE Standard Diameter Fiber Cleaver is used together with a fiber holder from a fusion splicer (adapted for all main splicer brands). Product Part Number Qty Standard Diameter Fiber Cleaver CLV-09-0002 (SFC) Standard Package Power Supply ACC-09-0001 1 Fitel/Fujikura Fiber Holder Platform ACC-09-0004 1 Tool Kit ACC-09-0003 1 User’s Manual & PC Software N/A 1 USB 2.0 Cable N/A 1 Optional Components Spare Diamond Blade CON-09-0010 *INFORMATION IS SUBJECT TO CHANGE WITHOUT NOTICE. Key Features: • Electronic cleave process for optimal cleave quality and repeatability Universal fiber clamping mechanism Designed for fiber cladding diameters from 80-220um Low cleave angles with very flat end faces, typical <0.5° Can be powered with battery or external power supply Available platforms that support Fujikura, Fitel and 3SAE fiber holders Technical Specifications: • Dimensions: 150(W) x 90(D) x 60(H) mm 150(W) x 90(D) x 80(H) mm (incl. lever) • Weight: 1.1 kg • Power Source: Built in rechargeable Li-Ion battery or external power supply (100 - 240 V AC, 50/60 Hz) • Supported fiber cladding: 80 - 220 μm • Fiber Holder Compatible for all Fusion Splicers • Supported fiber coating: Depending on Fiber Holder • Fiber Cladding: 50 µm - 1.5 mm • Fiber Coating: 80 µm - 2.0 mm • Cycle Time: 3 - 48 s Designed and manufactured by NorthLab Photonics AB in Nacka, Sweden Page 1 of 2

Transcript of 3SAE Standard Diameter Fiber Cleaver (SFC) 3SAE Standard Diameter Fiber Cleaver is an advanced...

Page 1: 3SAE Standard Diameter Fiber Cleaver (SFC) 3SAE Standard Diameter Fiber Cleaver is an advanced electronic ˜ber cleaver for ˜bers up to 220 ˚m. ... Test series of 250 cleaves, ...

3SAE Standard Diameter Fiber Cleaver (SFC)

The 3SAE Standard Diameter Fiber Cleaver is an advanced electronic �ber cleaver for �bers up to 220 μm. The cleaver is speci�cally designed for use in production lines where ease-of-use, process speed and a high production yield is crucial. The cleaver is at the same time well suited for R&D environments.

The 3SAE Standard Diameter Fiber Cleaver is utilizing an advanced ultrasonic diamond scribe technology to achieve optimal cleave performance and consistency. The cleaver generates very �at end-faces and low cleave angles (typical <0.5°) with a high repeatability.

The 3SAE Standard Diameter Fiber Cleaver has an unique and universal clamping mechanism which is self adjusting to the �ber diameter applied, no external parts or accessories are required.

The 3SAE Standard Diameter Fiber Cleaver is powered from an external power supply or the built in rechargeable battery.

The 3SAE Standard Diameter Fiber Cleaver is used together with a �ber holder from a fusion splicer (adapted for all main splicer brands).

Product Part Number Qty

Standard Diameter Fiber Cleaver CLV-09-0002

(SFC)

Standard PackagePower Supply ACC-09-0001 1Fitel/Fujikura Fiber Holder Platform ACC-09-0004 1Tool Kit ACC-09-0003 1User’s Manual & PC Software N/A 1USB 2.0 Cable N/A 1

Optional ComponentsSpare Diamond Blade CON-09-0010

*INFORMATION IS SUBJECT TO CHANGE WITHOUT NOTICE.

Key Features:

• Electronic cleave process for optimal cleave quality and repeatability• Universal �ber clamping mechanism• Designed for �ber cladding diameters from 80-220um• Low cleave angles with very �at end faces, typical <0.5°• Can be powered with battery or external power supply • Available platforms that support Fujikura, Fitel and 3SAE �ber holders

Technical Speci�cations:• Dimensions: 150(W) x 90(D) x 60(H) mm

150(W) x 90(D) x 80(H) mm (incl. lever)• Weight: 1.1 kg • Power Source: Built in rechargeable Li-Ion battery or external power supply (100 - 240 V AC, 50/60 Hz)• Supported fiber cladding: 80 - 220 μm • Fiber Holder Compatible for all Fusion Splicers• Supported fiber coating: Depending on Fiber Holder• Fiber Cladding: 50 µm - 1.5 mm• Fiber Coating: 80 µm - 2.0 mm• Cycle Time: 3 - 48 s

Designed and manufactured byNorthLab Photonics AB in Nacka, Sweden

Page 1 of 2

Page 2: 3SAE Standard Diameter Fiber Cleaver (SFC) 3SAE Standard Diameter Fiber Cleaver is an advanced electronic ˜ber cleaver for ˜bers up to 220 ˚m. ... Test series of 250 cleaves, ...

*INFORMATION IS SUBJECT TO CHANGE WITHOUT NOTICE.

Designed and manufactured byNorthLab Photonics AB in Nacka, Sweden

Page 2 of 2

3SAE Standard Diameter Fiber Cleaver (SFC)

Interferometer image approx. 0.15° Magni�ed end face

100

90

80

70

60

50

40

30

20

10

00.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8

Typical cleave angle distributionTest series of 250 cleaves, 125µm SMF28

Average cleave angle = 0.23° Median = 0.2° Standard deviation = 0.15°