213 - HKS Australia · *2:Main material in the component figure. SUS304/ High quality stainless...
Transcript of 213 - HKS Australia · *2:Main material in the component figure. SUS304/ High quality stainless...
NEW RELEASE●Transmission Gear Kit with Clutch for GR6 R35(GT-R)●LEGAMAX Sports DBA-ZC6(BRZ)●Air Intake Duct DBA-ZN6(86)/DBA-ZC6(BRZ)
NEW LINE-UP●SUPER FIRE RACING M50HL●HYBRID SPORTS OIL FILTER φ80 M20,UNF●Cool Style DBA-JG1(N-ONE)●SUPER SQVⅣ JF1(N BOX)/JG1(N-ONE)
INFORMATION●About compliance of Muffler for WISH (DBA-ZGE20W/2ZR-FAE 12/4〜)●About compliance of Muffler for 6MT CR-Z (DAA-ZF2/LEA-MF6 12/10〜)●About compliance of Muffler for IMPREZA WRX-STI SPEC-C (CBA-GRB/EJ20(TURBO) 10/4〜)●About compliance of Super Manifold GT-SPEC and GT-SPEC ECU package for the AT BRZ (DBA-ZC6/FA20 12/3〜).●About compliance of Suspension for PRIUS PHV (ZVW35/2ZR-FXE 12/1〜)
P1P2P2
P3P3・4
P5P5
P6P6
P6
P6
P6
92013
NEW
RELEASE
NEW RELEASE
●Transmission Gear Kit with Clutch for GR6 (for limited shops only)
For both high output and smooth control
●Clutch Pack for HKS Transmission Gear Kit (for limited shops only)
1
Vehicle Model Engine Model Year Gear numbers Gear Ratio Code No. RemarksGT-R R35 VR38DETT 07/12~ 6 Normal 27003-AN014 Will be released in October, 2013
Vehicle Model Engine Model Year Code No. RemarksGT-R R35 VR38DETT 07/12~ 27003-AN015 Will be released in October, 2013 (Repair parts)
Transmission Gear Kit with Clutch for GR6 R35(GT-R)
HKS has developed a new transmission gear kit with clutch for R35 GT-R for ultimate power control. We have tested and developed this product under HKS GT1000 Spec + slick tire + circuit time attack environment. And finally HKS has produced the ultimate transmission that will sustain the ultimate torque of GT-R.
・We have designed all the parts originally for the best measurement, so that it has more disks(stock:6, HKS:8) without making the them thinner. This change will provide a better transmission capacity and prevent from distortion in higher heat.
Also we designed a bigger piston so that it doesn’t have to modify the oil system. It has 110% better pressure joining compared to the stock.
・We adopted an original pressure‐resistant oil seal that has 170% stronger that the stock by redesigning the oil seal that’s inside the case.
・Adopted to the tuned engine’s higher RPM by changing the thrust needle bearing to the ball bearing. (allowance RPM: 8500)
・These upgrades make this clutch pack produce 175% more transmission capacity than the stock and 300% more strength (HKS testing data).
・All set and adjusted at shipping as a bolt-on of the clutch pack.
・The ultimate clutch pack for 1000ps and still has a smooth control for a parking in a garage.
●TOTALLY NEW DESIGNED STRUCTURE・The new structure design made gear cog width wider so it has an absolute
strength. ・We also used 3 times stronger steel material than the stock plate to
prevent from damage.・We also used strong steel materials for front cover, so that it will have the 100% capacity
to support bearing.
●High Quality Gear・As our study in the market about the gear, it the damage usually occurs in the gear
cog. Therefore we designed to the accurate and precise shape of the gear in to the micro level. It has a highly accurate gear movement and also has the less gear noise.
・Because of the super power of tuned engine, the oil film could break off, to protect the gear in such situation, we adopted best surface treatment which used in the F1.
●Correspond for stock’s weak point・Stock shifting fork sometime break down, so we made hybrid of steel and aluminum for
stronger and easy to replace the product.・We designed the both shaft end for fastening screw so that it will have no more
snap ring falling off problem. Also we reduced weighting press-fit for installation or totally inlaying design to more solid gear fixation with the screw. This will results in a improved maintainability and also have a stronger shaft.
* Need to disassemble transmission and reassemble because the some parts are re-used from the stock.
☆ The kit includes gear, clutch pack, shifting fork, sandwich plate and original bearing. It does not need to take out the bearing from the stock like other normal tuning kits, so that it’s much easier to handle and safer.
FEATURES
19.5mm
Stock
21.5mm
Other
24.5mm
HKS Stock HKS
CLUTCH PACK For ultimate power, Total Bolt-On system and the comfortable control
TRANSMISSION Absolute strength, higher reliability and still drivable for the street.
Gear parts
Clutch pack
Product photo
Stock HKS Stock HKS
Clutch pack at shipping
NEW
RELEASE
2Vehicle Model Engine Model Year Code No. Remarks
86 BRZ
DBA-ZN6 DBA-ZC6 FA20 12/4~
12/3~ 70999-AT001
Air Intake Duct DBA-ZN6(86)/DBA-ZC6(BRZ)
● The size of the opening is about 10 times bigger than the stock.
● Normally the FRP products have the fiber marks inside, but HKS Air Intake Duct has a flat surface inside.
FRP made products with smooth flat surface inside to have better air flow and less resistance.
The opening is warped The opening is not warped
10 times bigger
● The stock connecting part to the air cleaner box is warped because it’s made of flexible resin but HKS Air Intake Duct does not because it’s made of FRP which is very strong.
FEATURESStock
Stock
HKS
HKS
● There are air holes on top of the duct to have higher position against flooded or submerged situation.
*Need to take off the bumper for installation.
HKS
Air hole
New 4 tailpipes type LEGAMAX Sports muffler, only for BRZ.●Cool 4 tailpipes design! We designed and developed a new 4 tailpipes type HKS LEGAMAX SPORTS muffler for the stock BRZ bumper garnish to make it more stylish appearance. You can have a little change in appearance than others.
●Higher reduction in sound level and exhaust pressure For lower RPM, which most of the daily street drives uses, the noise inside car is almost as low as stock vehicle. However once you put the gas, very cool sporty sound of muffler has an effect. Of course, for Super Manifold installed vehicle will have this 2 way effects, too. We have designed this product for the future upgrades to 350ps and over by the straight and no squeezing shape that allow it to have super low exhaust pressure.
FEATURES
*2:Main material in the component figure. □ SUS304/ High quality stainless steel. ■ SUH409/ Stainless steel commonly used for stock exhaust.*3:About center pipe. Diameter of center pipe is the portion that has the largest diameter. (Excluding silencer and tip.) It is the condition with stock suspension.*4: Minimum road clearance between HKS muffler (Any parts included in the kit) and road surface. Therefore, it may be different from actual road clearance of the vehicle.
The data is basically the condition with stock suspension. However, please understand that some items have data with low down spring or ride height adjustable suspension kit. Caution : Hook, bracket, stay may be changed without prior notice. ★ Exhaust noise level at idle.
構成図
BRZ(DBA-ZC6)
Code No. 32018-AF009
純正ラバーステー
ラバーステー
ラバーステー
純正ナット純正スプリング
純正ボルトリングガスケット
プレーンワッシャボルト(M10 P1.5 L25)
プレーンワッシャ
ナット(M10 P1.5)
ナット(M10 P1.5)
リングガスケット
プレーンワッシャボルト(M10 P1.5 L25)
ナット(M4 座付)
六角ボルト(M4 L10)
純正球面ガスケット
純正クリップ
スプリングワッシャ
スプリングワッシャ
メインマフラー
第二中間パイプ
第一中間パイプ
触媒側フランジ
純正リアバンパー
ガーニッシュ
LEGAMAX Sports
RemarksBumper Garnish is contained in this product.
JQR No. JQR30133064●Vehicle ………●Model ………●Engine ………●Model Year …
BRZDBA-ZC6FA2012/4〜
Type of MufflerMain MaterialDiameter of TipDiameter of Mid PipeExhaust Noise StockLevel HKSVehicle's Height Heightwith Exhaust Measured PositionSystem(*4) Remarks
RX(LEGAMAX Sports)SUS304(*2)φ80×4φ60-50×2(*3)82dB(★54dB)86dB(★53dB)142mm2nd center pipe
LEGAMAX Sports Applicable to New Regulation enforced as of April, 2010
Super Neodymium MagnetNeodymium, which is becoming the standard for oil filters, is placed at the back of the filter where oil can collect, picking up small metal particles and fragments.
Super Stealth FrameThis familiar design forms the basis of high strength and low pressure loss. This applies to oil flow also to achieve the best results. Includes strengthened relief valve.
Super Intake HoleThe intake hole, where compressed oil comes in to the filter has been made larger. A unique pic shape design has allowed maximum oil flow whilst retaining seal strength.
Super Intake FlapUsing a silicon base flap, compressed oil is sent smoothly to the outer edge of the filter increasing flow speed and is compatible with the large diameter intake hole. Also acts as a reverse flow valve.
SPECIFICATION
NEW
LINE-U
P
3
NEW LINE-UP
Product Screw size Wrench size Heat range Code No. RemarksSUPER FIRE RACING M50HL φ12×26.5mm 14mm same as NGK10 50003-M50HL
SUPER FIRE RACING M50HL
HYBRID SPORTS OIL FILTER φ80 M20×P1.5/UNF3/4-16
HKS is introducing the new φ80 size HYBRID SPORTS OIL FILTER which improves oil flow by the hybrid filter structure and super stealth structure.
● R35 GT-R stock’s heat range is the same as NGK 8, NGK 9 to 86/BRZ, and the new HKS M50HL is the same as NGK 10. It’s for a high tuning vehicles.
● Reinforced by making the outer electrode bigger(see the pictures below). Also could have a steady ignition and ignition speed at a high load and high RPM by putting the center electrode in the middle of the spark plug.
● Improved the anti-taint property by making thermal edge to prevent the carbon buildup which occurs for the tuned engines.
FEATURES
● The new φ80 size HYBRID SPORTS OIL FILTER improves oil pressure drop and flow properties by approximately 30% compared to current sports oil filters.
● The large super intake hole and newly developed low resistant hybrid filter make it less of pressure loss. So it will improve the engine response by reducing the engine load.
● It does not have an extra reinforcement inner net to have more efficient oil flow. Instead, we reinforced it with stronger filter material and redesigned the structure to correspond the high viscosity oil. These new filter features will provide the stable fresh oil flow.
FEATURES
HKS is the first to release the high heat range tuning spark plug M12 long reach HEX size 14 for 86, BRZ and GT-R to the market.
HKS M50HL R35 Stock
☆ Ensured wide area of combustion by optimizing the posit ion of the outer electrode and central electrode. It has a more efficient flame spread than the normal iridium spark plug.
Super Hybrid Oil FilterUnwoven cloth and special plastic fiber composite is used ensuring high strength and low pressure loss. A refined but tough filter has been achieved which can withstand high pressure and high viscosity.
Filter color changed to red for both φ80 & φ68. time(h)
Oil filter pressure loss (for stock:100%)160
140
120
100
80
60
40
20
0
pressure loss (%)
POWER(PS)
トルク(kg・m)
TORQUE(kg・m)
5 10 200 15
HKSStockBCDE
Brass Terminal・Offers firm fitting
Gloss nickel plate trivalentchromium metal fitting・Corrosion-resistant
Bigger outer electrode・Better durability
Superior quality insulator mark
Iridium center electrode・Improves ignition & durability
Outer electrode with platinum chip・Better ignitionability & durability
Thermal edge・Improves anti-taint property
HKS Hybrid Sports Oil Filter reduces pressure loss about 20% less than stock and about 30% less than other sports filters.
HKS M SPARK PLUG
Normal iridium spark plug
4
NEW
LINE-U
P
Size Code No. RemarksΦ80 X H70 / M20 X P1.5 52009-AK003Φ80 X H70 / UNF3/4-16 52009-AK004
Vehicle Model Engine Model Year Center Bolt Code No. RemarksLEXUSGS430 UZS190 3UZ-FE 05/8~07/9 UNF 3/4-16 52009-AK004SC430 UZZ40 3UZ-FE 05/8~ UNF 3/4-16 52009-AK004TOYOTA
ARISTO JZS160 2JZ-GE 97/8~05/1 UNF 3/4-16 52009-AK004JZS161 2JZ-GTE 97/8~05/1ALTEZZA GXE10 1G-FE 98/11~05/9 UNF 3/4-16 52009-AK004
ALPHARD MNH10W 1MZ-FE 02/5~08/5 UNF 3/4-16 52009-AK004MNH15WVEROSSA JZX110 1JZ-GTE 01/7~04/5 UNF 3/4-16 52009-AK004
ESTIMA MCR30W 1MZ-FE 00/1~06/1 UNF 3/4-16 52009-AK004MCR40W
CROWN MAJESTAUZS207
3UZ-FE09/3~ UNF 3/4-16 52009-AK004
UZS186 04/7~09/2 UNF 3/4-16 52009-AK004UZS187
CRESTA
JZX100 1JZ-GTE
96/9~01/5 UNF 3/4-16 52009-AK004JZX101 2JZ-GEJZX100 1JZ-GEJZX105
SUPRA JZA80 2JZ-GTE 93/5~02/8 UNF 3/4-16 52009-AK0042JZ-GE
CELSIOR UCF30 3UZ-FE 00/8~06/5 UNF 3/4-16 52009-AK004UCF31
SOARERUZZ40 3UZ-FE 01/4~05/9 UNF 3/4-16 52009-AK004JZZ30 1JZ-GTE 91/5~99/8 UNF 3/4-16 52009-AK004JZZ31 2JZ-GE 94/1~01/3 UNF 3/4-16 52009-AK004
CHASER
JZX100 1JZ-GTE
96/9~01/7 UNF 3/4-16 52009-AK004JZX101 2JZ-GEJZX100 1JZ-GEJZX105
HARRIER
MCU30W
1MZ-FE 03/2~06/4 UNF 3/4-16 52009-AK004MCU31WMCU35WMCU36W
HARRIER HYBRID MHU38W 3MZ-FE 05/3~ UNF 3/4-16 52009-AK004
MARK Ⅱ
JZX110 1JZ-GTE00/10~04/11 UNF 3/4-16 52009-AK0041JZ-FSE
JZX115 1JZ-GEJZX100 1JZ-GTE
96/9~00/10 UNF 3/4-16 52009-AK004JZX101 2JZ-GEJZX100 1JZ-GEJZX105
MARK Ⅱ BLIT JZX110W 1JZ-GTE02/1~07/6 UNF 3/4-16 52009-AK0041JZ-FSE
JZX115W 1JZ-GEMITSUBISHI
RVR
N61W 4G93 97/11~02/8 M20×P1.5 52009-AK003N71WN64WG 4G64 97/12~02/8 M20×P1.5 52009-AK003N74WG
AIRTREKCU2W 4G63 01/6~05/10 M20×P1.5 52009-AK003CU4W 4G64CU5W 4G69 04/1~05/10 M20×P1.5 52009-AK003
GALANTEA3A 4G64 98/8~02/9 M20×P1.5 52009-AK003EC3AEC5A 6A13(TURBO) 96/8~02/9 M20×P1.5 52009-AK003
GRANDIS NA4W 4G69 03/5~09/6 M20×P1.5 52009-AK003DION CR9W 4G63 00/1~02/5 M20×P1.5 52009-AK003
DELICA SPACE GEARPB6W
6G72 94/05~07/1 M20×P1.5 52009-AK003PD6WPF6W
TRITON KB9T 6G74 06/8~ M20×P1.5 52009-AK003
PAJERO
V21W 4G64 96/3~99/8 M20×P1.5 52009-AK003V63W
6G7200/8~06/9 M20×P1.5 52009-AK003V73W
V83W 06/10~ M20×P1.5 52009-AK003V93WV25W
6G7493/5~99/8 M20×P1.5 52009-AK003V45W
V55WV65W 99/8~05/12 M20×P1.5 52009-AK003V75WV77W
6G7505/12~08/12 M20×P1.5 52009-AK003
V87W 05/12~ M20×P1.5 52009-AK003V97W
PAJERO iO H61W 4G93 99/8~00/6 M20×P1.5 52009-AK003H71W
LEGNUM EA5W 6A13 96/8~98/7 M20×P1.5 52009-AK003EC5W 98/8~02/8 M20×P1.5 52009-AK003
■Φ80 Application
5
NEW
LINE-U
P
Vehicle Model Engine Model Year Code No. Remarks
N BOX JF1 S07A 11/12~ 71008-AH006 Standard Suction Return Kit equipped
N-ONE JG1 S07A 12/11~ 71008-AH007 Standard Suction Return Kit equipped
SUPER SQVⅣ RETURN PLUS JF1(N BOX)/JG1(N-ONE)
*2:Main material in the component figure. □ SUS304/ High quality stainless steel. ■ SUH409/ Stainless steel commonly used for stock exhaust.*3:About center pipe. Diameter of center pipe is the portion that has the largest diameter. (Excluding silencer and tip.) It is the condition with stock suspension.*4: Minimum road clearance between HKS muffler (Any parts included in the kit) and road surface. Therefore, it may be different from actual road clearance of the vehicle.
The data is basically the condition with stock suspension. However, please understand that some items have data with low down spring or ride height adjustable suspension kit. Caution : Hook, bracket, stay may be changed without prior notice. ★ Exhaust noise level at idle.
構成図
N-ONE(DBA-JG1)
Code No. 31028-AH003
純正スプリング
純正触媒側フランジ純正球面ガスケット
純正ボルト
メインマフラー中間パイプ
プレーンワッシャ
プレーンワッシャ
プレーンワッシャ
プレーンワッシャ
スプリングワッシャ
テールパイプボルト(M10 P=1.5 L=25)
ボルト(M10 P=1.5 L=25)
ナット(M10 P=1.5)
ナット(M10 P=1.5)ナット(M10 P=1.5)
ガスケット(φ45)
ガスケット(φ45)ラバーステー
ラバーステー
ラバーステー(NA)
ラバーステー(NA)
ラバーステー(T/C)
Cool Style
備 考For 2WD.
JQR No. JQR20123199●Vehicle ………●Model ………●Engine ………●Model Year …
N-ONEDBA-JG1S07A(TURBO/NA)12/11〜
Type of MufflerMain MaterialDiameter of TipDiameter of Mid PipeExhaust Noise StockLevel HKSVehicle's Height Heightwith Exhaust Measured PositionSystem(※4) Remarks
KC-1(Titan)SUH409(*2)φ75×2φ42.7(*3)73(TURBO), 74(NA)dB(★58(TURBO), 58(NA)dB)
78(TURBO), 85(NA)dB(★60(TURBO), 64(NA)dB)
135mmCenter silencer
N BOX(JF1) FEATURES
N-ONE(JG1) FEATURES
● SQV Ⅳ Kit for HONDA N BOX which comes with a Return Kit.● The Super SQV Ⅳ has a cool high frequency blow-off sound for the atmosphere
exposure. It makes your vehicle more stands out(It will have less sound with the suction return).
● The Super SQV Ⅳ will be installed next to the engine, and will have the engine compartment look cooler.
● There was no problem such as engine stall by installing this product during the test.
● SQV Ⅳ Kit for HONDA N-ONE which comes with a Return Kit.
● The Super SQV Ⅳ has a cool high frequency blow-off sound for the atmosphere exposure. It makes your vehicle more stand out (It will have less sound for the suction return).
● The Super SQV Ⅳ will be installed next to the engine, and will have the engine compartment look cooler.
● There was no problem such as engine stall by installing this product during the test.
Parts Diagram
JF1
JG1
*The blue silicon hose for piping is an option.
Cool Style Applicable to New Regulation enforced as of April, 2010
INFO
RM
ATIO
N
6
INFORMATIONAbout compliance of Muffler for WISH (DBA-ZGE20W/2ZR-FAE 12/4〜)
About compliance of Super Manifold GT-SPEC and GT-SPEC ECU package for the AT BRZ (DBA-ZC6/FA20 12/3〜).
About compliance of Muffler for 6MT CR-Z (DAA-ZF2/LEA-MF6 12/10〜)
About compliance of Suspension for PRIUS PHV (ZVW35/2ZR-FXE 12/1〜)
About compliance of Muffler for IMPREZA WRX-STI SPEC-C (CBA-GRB/EJ20(TURBO) 10/4〜)
We have confirmed the Legamax Premium (32018-AT037) is installable for the WISH (DBA-ZGE20W/2ZR-FAE 12/4~).(*Passed Japan Acceleration Noise Regulation Test)
We have confirmed the Super Manifold GT-SPEC (33005-AT005) and GT-SPEC ECU package (33009-AT002) is installable for the AT BRZ (DBA-ZC6/FA20 12/3~).(*We have included the Exhaust Gas Test Certificate from July 1st, 2013. However if you need the certificate, please contact to HKS order center.)
We have confirmed the Silent Hi-Power (32016-AH030) w/center pipe is installable for the CR-Z (DAA-ZF2/LEA-MF6 12/10~).(*1 Passed Japan Acceleration Noise Regulation Test)(*2 CVT vehicle of ZF2 did not pass Japan Acceleration Noise Regulation Test)
We have confirmed the S-style X (80120-AT216)、S-style L (80130-AT106) and S-style C (80110-AT107) is installable for the PRIUS PHV (ZVW35/2ZR-FXE 12/1~).(*However S-style X has only 9cm of ground clearance at the factory setting, that it needs resetting for installation.)
We have confirmed the Super Turbo Muffler (31029-AF005) is installable for the IMPREZA WRX-STI SPEC-C (CBA-GRB/EJ20(TURBO) 10/4~).(*1 Passed Japan Acceleration Noise Regulation Test)(*2 The limited edition R205 did not pass Japan Acceleration Noise Regulation Test)
Super Turbo Muffler (31029-AF005) for GRB, GRF compliance list. (Aug. 2013)
Vehicle Classification Model Engine Model Year Muffler Style Code No. Remarks
WISH DBA- ZGE20W 2ZR-FAE 09/4~ LEGAMAX Premium 32018-AT037
The stock rear under spoiler is installable for grade "1.8S". Applicable for 2012/4 MC model. Not checked for grade
「1.8X」「2.0G」「2.0Z」and 4WD.
Vehicle Classification Model Engine Model Year Muffler Style Code No. Remarks
CR-Z DAA- ZF2 LEA-MF6 12/10~ Silent Hi-Power 32016-AH030Come with center pipe. Not applicable for Modulo or Mugen rear under spoiler installed vehicle. CVT is not adaptable for certification.
MODELS COMPLIANCE2.0 WRX-STI ○2.5 WRX-STI A-Line ○2.0 WRX-STI SPEC-C ○R205 ( ~10/3) Not testedR205 (10/4~ ) Not applicable
Vehicle Classification Model Engine Model Year Type Code No. Remarks
BRZ DBA- ZC6 FA20 12/3~
SUPER MANIFOLD GT-SPEC 33005-AT005 It’s combined unit of manifold and first catalyzer which is metal
catalyzer. Second catalyzer (front pipe) is stock.(for both MT/AT)
GT-SPEC ECU PACKAGE 33009-AT002 A set of Super Manifold GT-SPEC and Flash Editor. Includes
Japan Exhaust Gas Test Certificate. (for both MT/AT)
Vehicle Model Engine Model Year Type Code No. Remarks
PRIUS PHV ZVW35 2ZR-FXE 12/1~S-style X 80120-AT216 The ground clearance does not have 9mm for the factory shipping, so please adjust the height setting for the actual installation.S-style L 80130-AT106S-style C 80110-AT107
Vehicle Classification Model Engine Model Year Muffler Style Code No. Remarks
IMPREZAWRX-STI CBA- GRB EJ20
(TURBO) 07/10~ Super Turbo Muffler 31029-AF005 Center pipe included. Fit to stock option STI exhaust
finisher. Not for 'R205'.
Application
2013
.vol.9 HKS participated at the “Fuji 86 Style with BRZ 2013” which was held in the Fuji Speedway on 4th of August. The event started from 7:30 on Sunday morning, there were many people gathered at the gate. We could feel the 86/BRZ enthusiasts’ energy for the event. And when the gate opened up, many people came to HKS booth. We were displaying the HKS demo car with GT SUPERCHARGER installed and other products like SUPER MANIFOLD GT-SPEC, FLASH EDITOR and etc. Customers asked us many questions about our new products for 86/BRZ that were displayed in the booth and we explained them the characteristics and features of those products. We could see some 86/BRZ owners are eager to tune their cars for more power and better performance. We also did announce that we are developing some new products for 86/BRZ and people were very interested in those, too. We will try to satisfy our customers by making best prod-ucts for 86/BRZ and other automobiles in the aftermarket!
The applications were confirmed by SEPTEMBER 2013.
Unauthorized reproduction is strictly prohibited.
■Prices shown in this publication are the manufacturer's suggested retail price.■ Specifications may be changed without prior notice. Printed product images shown in this publication may be different from the actual product.■HKS will not be responsible for any damage caused by improper installation and/or installing to other inapplicable vehicles.■The product may not be compatible with vehicles even the model and/or engine type are the same as shown in the application chart. ■Data shown in this publication are based on the in-house data prepared under certain conditions.
HKS Co., Ltd.● Head Office7181 Kitayama, Fujinomiya, Shizuoka 418-0192, Japanhttp://www.hks-power.co.jp/