2014.xls · XLS file · Web viewHuman exposure to radio frequency fields from hand-held and...

TYPE Standard Code Standard Title Comments Due by Date CYS CEN/TCs MIRROR COMMITTEES

UAP CEN/TC 250 EN 1993-1-1:2005/FprA1 1/5/2014

Enquiry CEN/TC 126 EN ISO 10140-3:2010/prA2 2/1/2014

Enquiry CEN/TC 226 prEN 12767 2/28/2014

UAP CEN/TC 226 EN 13197:2011/FprA1 Road marking materials - Wear simulator Turntable 1/12/2014

Enquiry CEN/TC 250 EN 1992-1-1:2004/prA1 1/12/2014


Enquiry CEN/TC 336 prEN 12606-1 1/12/2014



UAP CEN/TC 227 FprEN 12697-7 rev 2/3/2014

Enquiry CEN/TC 33 prEN 12211 rev 2/3/2014

Enquiry CEN/TC 227 prEN 12697-25 rev 2/3/2014



Enquiry CEN/TC 250 EN 1991-1-3:2003/prA1 2/3/2014

Enquiry CEN/TC 126 prEN ISO 16283-2 rev 2/10/2014











FV CEN/TC 163 FprEN 35 2/9/2014

FV CEN/SS C20 FprEN 16701 2/9/2014

UAP CEN/TC 128 FprEN 12326-1 5/9/2014






UAP CEN/TC 127 FprEN 1366-1 4/12/2014

UAP CEN/TC 127 FprEN 1366-12 4/12/2014


TYPE Standard Code Standard Title Comments Due by Date CYS CEN/TCs MIRROR COMMITTEES12/10/2013

1/14/2014

1/21/2014

1/3/2014

1/3/2014

1/3/2014

1/3/2014

1/3/2014

1/3/2014

2/21/2014

2/21/2014

2/21/2014

enquiry 2/21/2014

1/10/2014

1/4/2014

1/10/2014

1/10/2014

1/10/2014

1/10/2014

1/10/2014

1/10/2014

Ο Κυπριακός Οργανισμός Τυποποίησης (CYS) σας διαβιβάζει τους τίτλους των προσχεδίων των Ευρωπαϊκών προτύπων τα οποία τίθενται στις διαδικασίες εθνικής διαβούλευσης και ψήφισης. Οι διαδικασίες αυτές είναι η Δημόσια Κρίση (Public PE-PE), η Συνοπτική Ψήφιση (UAP - UAP) και η Τελική Ψήφιση (FV - FV). Οι τίτλοι και ο τύπος των προσχεδίων περιέχονται στον συνημμένο πίνακα.

Οι ενδιαφερόμενοι μπορούν να προμηθευτούν τα κείμενα των προτύπων από τον Κυπριακό Οργανισμό Τυποποίησης (ΚΕΝΤΡΟ ΠΛΗΡΟΦΟΡΗΣΗΣ ΚΑΙ ΕΞΥΠΗΡΕΤΗΣΗΣ (ΚΕ.Π.Ε) τηλ. 22-411413/4, φαξ. 22411433

email: [email protected]

ΚΥΠΡΙΑΚΟΣ ΟΡΓΑΝΙΣΜΟΣ ΤΥΠΟΠΟΙΗΣΗΣΛεωφόρο Λεμεσού & Κώστα Αναξαγόρα 30,3ος Όροφος, 2014 Στρόβολος Λευκωσία Τ.Θ.16197 2086 Λευκωσία

Τηλ: +357 22 411411 Φαξ: +357 22 411511 Ηλεκτρ. Ταχυδρ.: [email protected] ιστοσελίδα: www.cys.org.cy

CEN Technical Committee

Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings

CONSTRUCTION & CIVIL ENGINEERING Acoustics - Laboratory measurement of sound

insulation of building elements - Part 3: Measurement of impact sound insulation - Amendment 2 (ISO 10140-3:2010/DAM 2:2013)

CONSTRUCTION & CIVIL ENGINEERING

Passive safety of support structures for road equipment - Requirements and test methods



Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings


Bitumen and bituminous binders - Determination of the Fraass breaking point


Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation


Bitumen and bituminous binders - Determination of needle penetration


Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method


Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays


Windows and doors - Resistance to wind load - Test method


Bituminous mixtures - Test methods for hot mix asphalt - Part 25: Cyclic compression test


Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor


Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor


Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads


Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO/DIS 16283-2:2013)


Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking


Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods


Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods


Bituminous mixtures - Test methods for hot mix asphalt - Part 48: Interlayer Bonding


Construction products - Assessment of release of dangerous substances - Terminology


Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO/DIS 12460-3:2013)


Wood-based panels - Determination of formaldehyde release - Part 5: Extraction method (called the perforator method) (ISO/DIS 12460-5:2013)

CONSTRUCTION & CIVIL ENGINEERING Unplasticized poly(vinyl chloride) (PVC-U) profiles for

the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces


Road restraint systems - Part 5: Product requirements, test and assessment methods and acceptance criteria


Bituminous mixtures - Test methods for hot mix asphalt - Part 16: Abrasion by studded tyres


Pedestal and wall-hung bidets with over-rim supply - Connecting dimensions


Energetic materials for Defence - Safety, vulnerability - Friability


Slate and stone for discontinuous roofing and external cladding - Part 1: Specifications for slate and carbonate slate


Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass (ISO/DIS 1288-1:2014)

CONSTRUCTION & CIVIL ENGINEERING Glass in building - Determination of the bending

strength of glass - Part 2: Coaxial double-ring test on flat specimens with large test surface areas (ISO/DIS 1288-2:2014)


strength of glass - Part 3: Test with specimen supported at two points (four-point bending) (ISO/DIS 1288-3:2014)


Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel-shaped glass (ISO/DIS 1288-4:2014)


strength of glass - Part 5: Coaxial double-ring test on flat specimens with small test surface areas (ISO/DIS 1288-5:2014)


Fire resistance tests for service installations - Part 1: Ventilation ducts


Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork


Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description



enquiry

CLC/TC 20

prEN 50618:2013 Electric cables for photovoltaic systems ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES enquiry

CLC/TC 81X

prEN 50622:2013Lightning protection systems pure performance standard ELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES unique acceptance

procedureCLC/TC 116 FprEN 50434:2013 Safety of household and similar appliances - Particular

requirements for mains operated shredders and chippersELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 2

FprEN 60034-19:2013Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 94

FprEN 61810-3:2013

Relays with forcibly guided (mechanically linked) contacts ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV

CLC/TC 9X FprEN 61375-2-3:2013 Electronic railway equipment - Train Communication

Network (TCN) - Part 2-3: TCN communication profileELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 46X FprEN 61935-1:2013 Testing of balanced communication cabling in accordance

with ISO/IEC 11801 - Part 1: Installed cablingELECTRICAL & ELECTRONIC


FprEN 62826:2013 Surface cleaning apliances - Floor treatment machines with

or without traction drive, for commercial use - Methods of measuring the performance


FprEN 61482-1-2:2013 Live working - Protective clothing against the thermal

hazards of an electric arc - Part 1-2: Test methods - Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test)

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES

enquiry

CLC/TC 86BXA prEN 50411-2-10:2013

Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-10: Sealed fibre splice closures type 2, category G, for FTTH optical distribution networks

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES enquiry

CLC/TC 22X prEN 50598-1:2013

Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1: General requirements for setting energy efficiency standards for power driven equipment using the extended product

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES enquiry CLC/TC 22X

prEN 50598-2:2013 Ecodesign for power drive systems, motor starters, power

electronics & their driven applications - Part 2: Energy efficiency indicators for power drive systems and motor starters

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES CLC/TC 22X

prEN 50598-3:2013 Ecodesign for power drive systems, motor starters, power

electronics & their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 86BXA FprEN 61300-2-43:2013

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-43: Tests - Screen testing of return loss of single mode PC optical fibre connectors

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES unique acceptance

procedureCLC/TC 205 EN 50491-2:2010/FprA1:2013 General requirements for Home and Building Electronic

Systems (HBES) and Building Automation and Control Systems (BACS) - Part 2: Environmental conditions

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 20 FprEN 60885-3:2013 Electrical test methods for electric cables - Part 3: Test

methods for partial discharge measurements on lengths of extruded power cables

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 20 FprEN 60885-3:2013 Electrical test methods for electric cables - Part 3: Test

methods for partial discharge measurements on lengths of extruded power cables

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/SR 35

FprEN 60086-4:2013 Primary batteries - Part 4: Safety of lithium batteries ELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/SR 91 FprEN 61189-5-2:2013

Test methods for electrical materials, interconnection structures and assemblies - Part 5-2: Test methods for printed board assemblies: Soldering flux

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/SR 91 FprEN 61189-5-3:2013 Test methods for electrical materials, interconnection

structures and assemblies - Part 5-3: Test methods for printed board assemblies: Soldering paste


FprEN 61189-5-4:2013 Test methods for electrical materials, interconnection

structures and assemblies - Part 5-4: Test methods for printed board assemblies: Solder alloys and fluxed and non-fluxed solid wire

1/10/2014

3/7/2014

2/7/2014

2/7/2014

2/7/2014

2/7/2014

1/3/2014

1/3/2014

1/24/2014

21/2/214

1/3/2014

1/3/2014

1/3/2014

1/3/2014

1/3/2014

1/24/2014

1/24/2014

1/24/2014

1/24/2014

2/28/2014

parallel vote on FDIS 1/24/2014

1/24/2014

2/28/2014

1/17/2014

1/17/2014

1/17/2014

1/10/2014

1/17/2014

1/17/2014

2/21/2014

2/21/2014

2/21/2014

2/21/2014

2/21/2014

1/17/2014

2/21/2014

2/21/2014

Miscellaneous lampholders - Part 1: General requirements 2/21/2014

2/21/2014

2/21/2014

2/21/2014

1/10/2014

1/10/2014

1/10/2014

1/10/2014

1/10/2014

10/1/2014

1/10/2014

1/10/2014

1/10/2014

1/10/2014

1/10/2014

1/10/2014

2/14/2014

1/10/2014

1/10/2014

4/11/2014

2/14/2014

2/14/2014

Field Device Tool (FDT) Interface Specification - Part 2: 2/14/2014

2/14/2014

2/14/2014

2/14/2014

1/10/2014

2/7/2014

4/4/2014

parallel vote on CDV CLC/SR 91

FprEN 62878-1-1:2013 Device embedded substrate - Generic specification - Test method


procedureCLC/SR 47 FprEN 60749-26:2013 Semiconductor devices - Mechanical and climatic test

methods - Part 26: Electrostatic discharge (ESD) sensitivity testing - Human body model (HBM)

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES vote for TS/TR CLC/TC 79

CLC/FprTS 50131-9:2013 Alarm systems - Intrusion and hold-up systems - Part 9:

Alarm verification - Methods and principlesELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/SR 80

EN 61162-3:2008/FprA2:2013 Maritime navigation and radiocommunication equipment

and systems - Digital interfaces - Part 3: Serial data instrument network


FprEN 62246-1:2013 Reed switches - Part 1: Generic specification ELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 26A

FprEN 61290-1:2013 Optical amplifiers - Test methods - Part 1: Optical power

and gain parametersELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 86BXA FprEN 62074-1:2013 Fibre optic interconnecting devices and passive

components - Fibre optic WDM devices - Part 1: Generic specification

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 210

EN 55016-4-2:2011/FprA1:2013 Specification for radio disturbance and immunity measuring

apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty


procedureCLC/TC 61 FprEN

60335-2-21:2012/FprAA:201XHousehold and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters



60335-2-31:2012/FprAA:201XHousehold and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 86BXA FprEN 61300-2-42:2013 Fibre optic interconnecting devices and passive

components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/SR 80 FprEN 62065:2013 Maritime navigation and radiocommunication equipment

and systems - Track control systems - Operational and performance requirements, methods of testing and required test results

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 34Z EN 60061-1:1993/FprA50:2013 Lamp caps and holders together with gauges for the control

of interchangeability and safety - Part 1: Lamp capsELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 34Z EN 60061-2:1993/FprA47:2013 Lamp caps and holders together with gauges for the control

of interchangeability and safety - Part 2: LampholdersELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS

CLC/TC 34Z EN 60061-3:1993/FprA48:2013 Lamp caps and holders together with gauges for the control

of interchangeability and safety - Part 3: GaugesELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/SR 36C

FprEN 62231-1:2013 Composite station post insulators for substations with AC

voltages greater than 1 000 v up to 245 kv - Part 1: Dimensional, mechanical and electrical characteristics

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 100X FprEN 62889:2013 Digital video interface - Gigabit video interface (GVIF) for

multimedia systems (TA 4)ELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/SR 18 FprEN 60092-507:2013 Electrical installations in ships - Part 507 - Small vessels ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES :

parallel vote on CDV

CLC/TC 88

FprEN 61400-25-2:2013 Wind turbines - Part 25-2: Communications for monitoring and control of wind power plants - Information models

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/SR 34A EN 61167:2011/FprA1:2013 Metal halide lamps - Performance specification ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES CLC/TC 2 FprEN 60034-18-41:2013 Rotating electrical machines - Part 18-41: Qualification and

quality control tests for partial discharge free (Type I) electrical insulation systems used in rotating electrical machines fed from voltage converters

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 2 FprEN 60034-30-1:2013 Rotating electrical machines - Part 30-1: Efficiency classes

of single-speed, three-phase, cage-induction motors (IE code)

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/SC 31-1 FprEN 60079-10-2:2013 Explosive atmospheres - Part 10-2: Classification of areas -

Combustible dust atmospheresELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES formal vote CLC/SC 9XB FprEN 50125-1:2013 Railway applications - Environmental conditions for

equipment - Part 1: Rolling stock and on-board equipmentELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES formal vote CLC/SC 9XB FprEN 50125-1:2013 Railway applications - Environmental conditions for

equipment - Part 1: Rolling stock and on-board equipmentELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 62

FprEN 62570:2013 Standard practice for marking medical devices and other

items for safety in the magnetic resonance environmentELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES :

formal vote

CLC/TC 108X FprEN 62368-1:2013/FprAA:2013 Audio/video, information and communication technology equipment - Part 1: Safety requirements

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES :

parallel vote on FDIS

CLC/TC 210 FprEN 55016-1-2:2013 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 17B FprEN 62626-1:2013 Low-voltage switchgear and controlgear enclosed

equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 86BXA FprEN 61755-1:2013 Fibre optic interconnecting devices and passive

components - Fibre optic connector optical interfaces - Part 1: Optical interfaces for single-mode non-dispersion shifted fibres - General and guidance

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 86BXA FprEN 61755-2-1:2013 Fibre optic interconnecting devices and passive

components - Fibre optic connector optical interfaces - Part 2-1: Connection of non-dispersion shifted single mode non-angled physically contacting fibres


components - Fibre optic connector optical interfaces - Part 2-2: Connection of non-dispersion shifted single-mode angled physically contacting (APC) fibres

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV

CLC/TC 86BXA

FprEN 61755-3-1:2013 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-1: Connectors with 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrule, non-angled single-mode non-


components - Fibre optic connector optical interfaces - Part 3-2: Connectors with 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrule, angled single-mode non-

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/SR 85

FprEN 61557-15:2013 Electrical safety in low voltage distribution systems up to 1

000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 15: functional safety requirements for insulation monitoring

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/SR 110 FprEN 61747-2-2:2013 Liquid crystal display devices - Part 2-2: Matrix colour LCD

modules - Blank detail specificationELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV

CLC/TC 34Z FprEN 60238:2013 Edison screw lampholders ELECTRICAL & ELECTRONIC


CLC/TC 34Z FprEN 60838-1:2013 ELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 86BXA FprEN 62005-9-1:2013 Fibre optic interconnecting devices and passive

components - Reliability - Part 9-1: Qualification of passive optical components

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/SR 86C FprEN 62343-2:2013 Dynamic modules - Part 2: Reliability qualification ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 72 FprEN 60730-2-7:2013 Automatic electrical controls for household and similar use -

Part 2-7: Particular requirements for timers and time switches

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES formal vote

CLC/TC 20 FprEN 50565-1:2013 Electric cables - Guide to use for cables with a rated voltage

not exceeding 450/750 V - Part 1: General guidanceELECTRICAL & ELECTRONIC


CLC/TC 61

FprEN 60335-2-6:2013 Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 108X FprEN 62368-1:2013 Audio/video, information and communication technology

equipment - Part 1: Safety requirementsELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES formal vote

CLC/TC 20

FprEN 50565-2:2013Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V - Part 2: Specific guidance related to EN 50525 cable types

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS

CLC/SR 33

FprEN 60831-2:2013

Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 2: Ageing test, self-healing test and destruction test


FprEN 60831-1:2013 Shunt power capacitors of the self-healing type for a.c.

systems having a rated voltage up to and including 1000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation


components - Basic test and measurement procedures - Part 3-52: Examinations and measurements - Guide hole and alignment pin deformation constant, CD for 8 degree

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/SR 89 FprEN 60695-9-2:2013 Fire hazard testing - Part 9-2: Surface spread of flame -

Summary and relevance of test methodsELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 116

FprEN 62841-1:2013 Electric Motor-Operated Hand-Held, Transportable Tools

and Lawn and Garden Machinery - Safety - Part 1: General requirements


FprEN 60695-10-2:2013 Fire hazard testing - Part 10-2: Abnormal heat - Ball

pressure testELECTRICAL & ELECTRONIC


procedure CLC/TC 116

FprEN 62841-1:2013/FprAA:2013 Electric Motor-Operated Hand-Held, Transportable Tools and Lawn and Garden Machinery - Safety - Part 1: General requirements


components - Basic test and measurement procedures - Part 2-35: Tests - Cable nutation

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/SR 17D FprEN 61439-5:2013 Low-voltage switchgear and controlgear assemblies - Part

5: Assemblies for power distribution in public networksELECTRICAL & ELECTRONIC


components - Fibre optic connector interfaces - Part 30:Type CLIK connector series

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 86BXA FprEN 61754-30:2013 Fibre optic interconnecting devices and passive

components - Fibre optic connector interfaces - Part 30:Type CLIK connector series


procedureCLC/TC 14

FprEN 50629

Energy efficiency of transformers with Um greater than 36 kV

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 14 FprEN 60076-10:2013 Power transformers - Part 10: Determination of sound

levelsELECTRICAL & ELECTRONIC


CLC/TC 21X

FprEN 62620:2013 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 65X FprEN 62453-2:2013 ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV

CLC/TC 65X FprEN 61804-2:2013 Function blocks (FB) for process control and EDDL - Part 2:

Specification of FB conceptELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 65X FprEN 62453-1:2013 Field Device Tool (FDT) interface specification - Part 1:

Overwiew and guidanceELECTRICAL & ELECTRONIC


CLC/SR 103 FprEN 60215:2013 Safety requirements for radio transmitting equipment ELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 57 FprEN 61970-453:2013 Energy Management System Application Program Interface

(EMS-API) - Part 453: Diagram Layout ProfileELECTRICAL & ELECTRONIC


: CLC/TC 21X

FprEN 62675:2013 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride prismatic rechargeable single cells for industrial applications


procedureCLC/TC 14 FprEN 50588-1:2013 Medium voltage transformers 50 Hz, with highest voltage

for equipment not exceeding 36 kV - Part 1: General requirements


FprEN 62021-3:2013 1/10/2014

2/7/2014

2/7/2014

2/7/2014

2/7/2014

2/7/2014

2/7/2014

2/7/2014

2/7/2014

1/10/2014

1/31/2014

1/10/2014

1/31/2014

1/31/2014

1/31/2014

parallel vote on CDV 1/31/2014

1/31/2014

1/31/2014

1/31/2014

1/31/2014

1/31/2014

1/31/2014

1/31/2014

1/31/2014

1/31/2014

1/31/2014

FprEN 55032:2013/ (fragment 5 1/31/2014

1/31/2014

1/31/2014

1/3/2014

3/1/21014

1/3/2014

1/24/2014

3/21/2014

1/3/2014

1/3/2014

1/3/2014

1/3/2014

1/3/2014

1/3/2014

1/3/2014

1/24/2014

1/24/2014

1/24/2014

1/24/2014

1/24/2014

1/17/2014

EN 60335-2-11:2010/FprAC:201X 1/17/2014

1/17/2014

1/17/2014

1/17/2014

1/17/2014

1/17/2014

4/18/2014

4/11/2014

4/11/2014

4/11/2014

4/11/2014

4/4/2014

9/5/2014

FV 2/7/2014

2/14/2014

2/14/2014

2/14/2014

3/14/2014

3/14/2014


CLC/SR 10 Insulating liquids - Determination of acidity - Part 3: Test methods for non mineral insulating oils

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/SR 34A FprEN 60969:2013 Self-ballasted compact fluorescent lamps for general

lighting services - Performance requirementsELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/SR 34A FprEN 62868:2013 Organic light emitting diode (OLED) panels for general

lighting - Safety requirementsELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 69X FprEN 61980-1:2013 Electric vehicle wireless power transfer systems (WPT) -

Part 1: General requirementsELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 88 FprEN 61400-27-1:2013 Wind turbines - Part 27-1: Electrical simulation models -

Wind turbinesELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 88 FprEN 61400-27-1:2013 Wind turbines - Part 27-1: Electrical simulation models -

Wind turbinesELECTRICAL & ELECTRONIC


CLC/SR 91 FprEN 60068-2-58:2013 Environmental testing - Part 2-58: Tests - Test Td: Test

methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 17AC EN 62271-104:2009/FprA1:2013 High-voltage switchgear and controlgear - Part 104:

Alternating current switches for rated voltages of 52 kV and above


CLC/SR 48D FprEN 60297-3-108:2013 Mechanical structures for electronic equipment -

Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 108: Dimensions of R-typesubracks and plug-in units

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 95X FprEN 60255-121:2013 Measuring relays and protection equipment - Part 121:

Functional requirements for distance protectionELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 34Z FprEN 60598-2-20:2013 Luminaires - Part 2-20: Particular requirements - Lighting

chainsELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 99X EN 61936-1:2010/FprA1:2013 Power installations exceeding 1 kV a.c. - Part 1: Common

rulesELECTRICAL & ELECTRONIC


CLC/TC 34Z

FprEN 62493:2013 Assessment of lighting equipment related to human exposure to electromagnetic fields


FprEN 60286-2:2013

Packaging of components for automatic handling - Part 2: Packaging of components with unidirectional leads on continuous tapes


CLC/SR 47F FprEN 62047-17:2013 Semiconductor devices - Micro-electromechanical devices -

Part 17: Bulge test method for measuring mechanical properties of thin films


CLC/TC 86BXA

FprEN 61300-3-53:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and Measurements - Encircled angular flux (EAF) measurement method based on two-

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 31 FprEN 60079-32-2:2013 Explosive atmospheres - Part 32-1: Electrostatics hazards -

TestsELECTRICAL & ELECTRONIC


CLC/TC 34Z

EN 60061-1:1993/FprA52:2013 IEC 60061-1:1969/A52:201X (34B/1707/CDV) (EQV) Title

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 34Z EN 60061-2:1993/FprA49:2013 Lamp caps and holders together with gauges for the control


EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 34Z EN 60061-3:1993/FprA50:2013 Lamp caps and holders together with gauges for the control


EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 34Z

FprEN 60598-2-21:2013 Luminaires - Part 2-21: Particular requirements - Sealed

lighting chainsELECTRICAL & ELECTRONIC


FprEN 61000-6-7:2013 Electromagnetic compatibility (EMC) - Part 6-7: Generic

standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations


CLC/TC 210

FprEN 55032:2013/ (fragment 2)

Electromagnetic compatibility of multimedia equipment - Emission requirements (Test channels for broadcast receivers)


FprEN 55032:2013/ (fragment 3) Electromagnetic compatibility of multimedia equipment -

Emission requirements (Measurement uncertainty)ELECTRICAL & ELECTRONIC


CLC/TC 210

FprEN 55032:2013/ (fragment 4) Electromagnetic compatibility of multimedia equipment - Emission requirements (Fully anechoic Room measurement techniques)

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 210 FprEN 55032:2013/ (fragment 5) Electromagnetic compatibility of multimedia equipment -

Emission requirements (Other test methods for radiated emissions)

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 210 Electromagnetic compatibility of multimedia equipment -

Emission requirements (Other test methods for radiated emissions)

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES formal vote CLC/SC 9XB FprEN 50343:2013 Railway applications - Rolling stock - Rules for installation

of cablingELECTRICAL & ELECTRONIC


FprEN 55032:2013/ (fragment 1) CISPR 32:201X/ (fragment 1) (CISPR/I/449/CDV) (EQV)

Title

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 26A FprEN 60974-10:2013 Arc welding equipment - Part 10: Electromagnetic

compatibility (EMC) requirementsELECTRICAL & ELECTRONIC


components - Fibre optic WDM devices - Part 1: Generic specification


EN 55016-4-2:2011/FprA1:2013 Specification for radio disturbance and immunity measuring

apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty



60335-2-21:2012/FprAA:201XHousehold and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters



60335-2-31:2012/FprAA:201XHousehold and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors


CLC/TC 86BXA FprEN 61300-2-42:2013 Fibre optic interconnecting devices and passive

components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief



CLC/SR 80 FprEN 62065:2013 Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational and performance requirements, methods of testing and required test results

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 34Z

EN 60061-1:1993/FprA50:2013 Lamp caps and holders together with gauges for the control


EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES


CLC/TC 34Z EN 60061-1:1993/FprA50:2013 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 34Z EN 60061-1:1993/FprA50:2013 Lamp caps and holders together with gauges for the control






EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/SR 36C FprEN 62231-1:2013 Composite station post insulators for substations with AC

voltages greater than 1 000 v up to 245 kv - Part 1: Dimensional, mechanical and electrical characteristics

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 100X FprEN 62889:2013 Digital video interface - Gigabit video interface (GVIF) for

multimedia systems (TA 4)ELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 100X parallel vote on CDV Digital video interface - Gigabit video interface (GVIF) for

multimedia systems (TA 4)


CLC/SR 18

FprEN 60092-507:2013 Electrical installations in ships - Part 507 - Small vessels ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 88 FprEN 61400-25-2:2013 Wind turbines - Part 25-2: Communications for monitoring

and control of wind power plants - Information modelsELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 17AC

FprEN 62271-3:2013 High-voltage switchgear and controlgear - Part 3: Digital

interfaces based on IEC 61850ELECTRICAL & ELECTRONIC


procedure

CLC/TC 61Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers


procedure CLC/TC 61

EN 60335-2-14:2006/FprAB:201XHousehold and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines


unique acceptance procedure

CLC/TC 61

FprEN 60335-2-15:2012/FprAA:201X

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids



60335-2-15:2012/FprAA:201XHousehold and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids


unique acceptance procedure

CLC/TC 61

FprEN 60335-2-35:2012/FprAA:201X

Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters


CLC/SR 91

FprEN 61760-4:2013 Surface mounting technology - Part 4: Standard method for classification, packaging, labelling and handling of moisture sensitive devices


enquiry

CLC/TC 78 prEN 50321:2013

Live working - Footwear for electrical protection - Insulating footwear and overboots

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES enquiry CLC/TC 205

prEN 50491-11:2013 General requirements for Home and Building Electronic

Systems (HBES) and Building Automation and Control Systems (BACS) - Part 11: Smart Metering - Application Specifications - Simple External Consumer Display


CLC/TC 46X prEN 50290-2-33:2013 Communication cables - Part 2-33: Common design rules

and construction - Polyethylene insulation for multi element metallic data cables for indoor application


CLC/TC 46X

prEN 50290-2-37:2013

Communication cables - Part 2-33: Common design rules and construction - Polyethylene insulation for multi element metallic data cables for indoor application


enquiry

CLC/TC 46X

prEN 50290-2-38:2013 Communication cables - Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cables

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES :

enquiry

CLC/TC 20

prEN 50577:2013

Electric cables - Fire resistance test for unprotected electric cables (P classification)


CLC/TC 215 prEN 50600-2-4:2013 Information technology - Data centre facilities and

infrastructures - Part 2-4: Telecommunications Cabling Infrastructure

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES CLC/TC 79 EN 50131-6:2008/FprA1:2013 Alarm systems - Intrusion and hold-up systems - Part 6:

Power suppliesELECTRICAL & ELECTRONIC


CLC/TC 108X FprEN 60065:2013 Audio, video and similar electronic apparatus - Safety

requirementsELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 17AC FprEN 62271-202:2013 High-voltage switchgear and controlgear - Part 202: High-

voltage/low-voltage prefabricated substationELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 17AC

FprEN 62271-201:2013 High-voltage switchgear and controlgear - Part 201: AC

solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV


CLC/TC 44X

FprEN 62046:2013 Safety of machinery - Application of protective equipment to detect the presence of persons

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 65X

FprEN 62424:2013 Representation of process control engineering - Request in

P&I diagrams and data exchange between P&ID tools and PCE-CAE tools


2/14/2014

rallel vote on FDIS 2/21/2014

2/21/2014

3/21/2014

2/21/2014

3/21/2014

3/21/2014

2/21/2014

3/21/2014

3/21/2014

3/21/2014

3/21/2014

3/21/2014

3/21/2014

3/21/2014

3/21/2014

3/21/2014

4/11/2014

1/10/2014

3/14/2014

3/14/2014

3/14/2014

3/14/2014

3/14/2014

3/14/2014

4/11/2014

3/14/2014

4/11/2014

4/11/2014

4/11/2014

4/11/2014

4/11/2014

4/11/2014

4/11/2014

4/11/2014

4/11/2014

4/11/2014

4/11/2014

CLC/TC 4/11/2014

4/11/2014

4/11/2014

4/11/2014

formal vote

CLC/TC 108X FprEN 60065:2013/FprAA:2013 Audio, video and similar electronic apparatus - Safety requirements

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES CLC/TC 86BXA

FprEN 61300-3-29:2013 Fibre optic interconnecting devices and passive

components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Spectral transfer characteristics of DWDM devices


FprEN 61558-2-10:2013 Safety of transformers, reactors, power supply units and

combinations thereof - Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages


EN 60601-2-37:2008/FprA1:2013 Medical electrical equipment - Part 2-37: Particular

requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment


FprEN 60728-1:2013 Cable networks for television signals, sound signals and

interactive services - Part 1: System performance of forward paths

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 209 EN 60728-7-1:2005/FprA1:2013 Cable networks for television signals, sound signals and

interactive services - Part 7-1: Hybrid Fibre Coax Outside Plant Status Monitoring - Physical (PHY) Layer Specification

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES vote for TS/TR CLC/TC 61

CLC/FprTR 50417:2013 Safety of household and similar electrical appliances -

Interpretations related to European Standards in the EN 60335 series

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 2 EN 60034-8:2007/FprA1:2013 Rotating electrical machines - Part 8: Terminal markings

and direction of rotationELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 23E

FprEN 60898-1:2013 Electrical accessories - Circuit-breakers for overcurrent

protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/SR 27 FprEN 62798:2013 Industrial electroheating equipment - Test methods for

infrared emittersELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 62 FprEN 62366-1:2013 Medical devices - Part 1: Application of usability

engineering to medical devicesELECTRICAL & ELECTRONIC


CLC/TC 65X FprEN 62769-2:2013 Devices and integration in enterprise systems; Field Device

Integration - Part 2: FDI ClientELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 65X FprEN 62769-3:2013 Devices and integration in enterprise systems; Field Device

Integration - Part 3: FDI ServerELECTRICAL & ELECTRONIC


Integration - Part 4: FDI PackagesELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 65X

FprEN 62769-5:2013 Devices and integration in enterprise systems; Field Device

Integration - Part 5: FDI Information ModelELECTRICAL & ELECTRONIC


Integration - Part 1: OverviewELECTRICAL & ELECTRONIC


Integration - Part6: Technology MappingELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 86A FprEN 60794-3-21:2014 Optical fibre cables - Part 3-21: Outdoor cables - Product

specification for optical self-supporting aerial telecommunication cables for use in premises cabling


procedure CLC/TC 108X

FprEN 50514 Audio, video and information technology equipment - Routine electrical safety testing in production


CLC/SR 33 FprEN 60871-4:2014 Shunt capacitors for A.C. power systems having a rated

voltage above 1000 V - Part 4: Internal fusesELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS CLC/TC 34Z FprEN 62442-2:2014 Energy performance of lamp controlgear - Part 2:

Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on FDIS :

CLC/TC 34Z

FprEN 62442-3:2014 Energy performance of lamp controlgear - Part 3: Controlgear for halogen lamps and LED modules - Method of measurement to determine the efficiency of the controlgear


CLC/TC 62

FprEN 60601-2-36:2014 Medical electrical equipment - Part 2-36: Particular requirements for the basic safety and essential performance of equipment for extracorporeally induced lithotripsy


FprEN 62841-2-2:2014 Electric motor-operated hand-held tools, transportable tools

and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES formal vote CLC/TC 116 EN 60745-2-3:2011/FprAB:2014 Hand-held motor-operated electric tools - Safety - Part 2-3:

Particular requirements for grinders, polishers and disk-type sanders


CEN/CLC/TC 3 FprEN ISO/IEC 80369-5:2014 Small bore connectors for liquids and gases in healthcare

applications - Part 5: Connectors for limb cuff inflation applications


FprEN 60825-1:2014 Safety of laser products - Part 1: Equipment classification

and requirementsELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/SC 46XA

FprEN 62153-4-7:2014 Metallic communication cable test methods - Part 4-7:

Shielded screening attenuation test method for measuring the transfer impedence ZT and the screening attenuation aS or the coupling attenuation aC of RF-Connectors and


EN 60335-2-65:2003/FprA2:2014 Household and similar electrical appliances - Safety - Part

2-65: Particular requirements for air-cleaning appliancesELECTRICAL & ELECTRONIC


CLC/TC 61

FprEN 60335-2-81:2014 Household and similar electrical appliances - Safety - Part 2-81: Particular requirements for foot warmers and heating mats

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV :

CLC/TC 61

FprEN 60335-2-111:2014 Household and similar electrical appliances - Safety - Part 2-111: Particular requirements for electric ondol mattress with a non-flexible heated part


CLC/TC 62

EN 60601-2-54:2009/FprA1:2014 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy


CLC/TC 62

EN 60601-2-54:2009/FprA1:2014

Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy


CLC/TC 65X

FprEN 62541-100:2014 OPC Unified Architecture Specification - Part 100: Device Interface


FprEN 61000-4-30:2014 Electromagnetic Compatibility (EMC) - Part 4-30: Testing

and measurement techniques - Power quality measurement methods


FprEN 60904-2:2014

Photovoltaic devices - Part 2: Requirements for reference solar devices

2014-04-11 ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV

CLC/TC 82 FprEN 62759-1:2014 Transportation testing of photovoltaic (PV) modules - Part

1: Transportation and shipping of PV module stacksELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 86A FprEN 60793-1-20:2014 Optical fibres - Part 1-20: Measurement methods and test

procedures - Fibre geometryELECTRICAL & ELECTRONIC

EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 86A FprEN 60793-1-43:2014 Optical fibres - Part 1-43: Measurement methods -

Numerical aperture measurementELECTRICAL & ELECTRONIC


FprEN 55011:2014 (fragment 1) Industrial, scientific and medical equipment - Radio-

frequency disturbance characteristics - Limits and methods of measurement - Fraction project f1: Supplement of CISPR 11 with emission requirements for Grid Connected Power


CLC/TC 210

FprEN 55011:2014 (fragment 2) Industrial, scientific and medical equipment - Radio frequency disturbance characteristics - Limits and methods of measurement - Fraction project f2: General maintenance (GM) for CISPR 11 Ed.5.1 (2010)

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 210 FprEN 55011:2014 (fragment 4) Industrial, scientific and medical equipment - Radio-

frequency disturbance characteristics - Limits and methods of measurement - Fraction project f4: General maintenance (GM) for CISPR 11 Ed.5.1 (2010)

ELECTRICAL & ELECTRONIC EQUIPMENT AND ELECTRICAL & ELECTRONIC MEDICAL DEVICES parallel vote on CDV CLC/TC 210 FprEN 55011:2014 (fragment 5) Industrial, scientific and medical equipment - Radio-

frequency disturbance characteristics - Limits and methods of measurement - Fraction project f5: Supplement of CISPR 11 with emission requirements for Grid Connected Power


TYPE CEN Technical ComStandard Code Standard Title Comments Due by Date CYS CEN/TCs MIRROR COMMITTEES

Enquiry CEN/TC 290 EN ISO 14405-1:2010/prA1 1/21/2014Mechanical Engineering

Enquiry CEN/TC 290 prEN ISO 14405-1 2/7/2014Mechanical Engineering


Enquiry CEN/TC 268 prEN ISO 21009-2 rev 2/19/2014Mechanical Engineering

Enquiry CEN/TC 121 prEN ISO 14172 rev 2/26/2014Mechanical Engineering

Enquiry CEN/TC 121 prEN ISO 15614-7 rev 2/26/2014 Mechanical Engineering

Enquiry CEN/TC 121 prEN ISO 17632 2/26/2014 Mechanical Engineering

Enquiry CEN/TC 121 prEN ISO 18278-1 2/26/2014 Mechanical Engineering

Enquiry CEN/TC 121 prEN ISO 636 2/26/2014Mechanical Engineering

Enquiry CEN/TC 269 prEN 12953-3 2/26/2014Mechanical Engineering


Enquiry CEN/TC 290 prEN ISO 1660 rev 2/26/2014Mechanical Engineering

Enquiry EN ISO 21487:2012/prA1 2/26/2014Mechanical Engineering

Enquiry EN ISO 25197:2012/prA1 2/26/2014Mechanical Engineering

Enquiry prEN ISO 18854 2/26/2014Mechanical Engineering

Enquiry CEN/TC 12 prEN ISO 19901-5 3/3/2014 Mechanical Engineering

Enquiry CEN/TC 69 prEN 16668 3/3/2014 Mechanical Engineering

Enquiry CEN/TC 144 prEN 16666 3/3/2014Mechanical Engineering


Enquiry ECISS/TC 107 prEN 10028-7 3/3/2014Mechanical Engineering

Enquiry ECISS/TC 107 prEN 10272 Stainless steel bars for pressure purposes 3/3/2014Mechanical Engineering

Enquiry ECISS/TC 107 prEN 10273 3/3/2014Mechanical Engineering


Enquiry ECISS/TC 108 prEN 10106 rev 3/3/2014Mechanical Engineering

Enquiry ECISS/TC 108 prEN 10303 rev 3/3/2014 Mechanical Engineering

Enquiry ECISS/TC 111 prEN ISO 11970 3/3/2014 Mechanical Engineering

Enquiry CEN/TC 188 prEN 12882 3/24/2014 Mechanical Engineering


Enquiry CEN/SS T01 EN ISO 10240:2004/prA1 3/24/2014Mechanical Engineering

Enquiry CEN/TC 144 EN 15694:2009/prA1 4/7/2014Mechanical Engineering

Enquiry CEN/SS T01 prEN ISO 19009 4/7/2014Mechanical Engineering




FV CEN/TC 121 FprEN ISO 5826 1/3/2014 Mechanical Engineering

FV CEN/TC 121 FprEN 14700 1/7/2014 Mechanical Engineering

FV CEN/TC 188 FprEN 12881-1 1/14/2014Mechanical Engineering

FV CEN/TC 290 FprEN ISO 1938-1 1/14/2014Mechanical Engineering

FV CEN/TC 12 FprEN ISO 13354 1/28/2014Mechanical Engineering

FV CEN/TC 74 FprEN 13555 1/28/2014Mechanical Engineering

FV CEN/TC 190 FprEN 16482 Founding - Continuous cast iron bars 1/28/2014Mechanical Engineering


FV CEN/TC 247 FprEN ISO 16484-5 rev 3/5/2014Mechanical Engineering

UAP CEN/TC 185 FprEN ISO 21670 Hexagon weld nuts with flange (ISO 21670:2013) 1/10/2014 Mechanical Engineering

UAP CEN/TC 247 FprEN ISO 16484-6 3/5/2014 Mechanical Engineering

UAP ECISS/TC 101 FprEN ISO 10113 5/5/2014 Mechanical Engineering

UAP ECISS/TC 101 FprEN ISO 10275 5/5/2014Mechanical Engineering



Enquiry CEN/TC 237 prEN 12405-3 Gas meters - Conversion devices - Part 3: Flow computer 4/28/2014Mechanical Engineering



UAP CEN/TC 234 EN 12732:2013/FprA1 1/2/2014 Mechanical Engineering

UAP CEN/CLC/TC 5 FprEN 16603-10-12 1/3/2014 Mechanical EngineeringUAP CEN/CLC/TC 5 FprEN 16603-20-06 Space engineering - Spacecraft charging 1/3/2014 Mechanical EngineeringUAP CEN/CLC/TC 5 FprEN 16603-20-07 Space engineering - Electromagnetic compatibility 1/3/2014 Mechanical EngineeringUAP CEN/CLC/TC 5 FprEN 16603-20-08 1/3/2014 Mechanical EngineeringUAP CEN/CLC/TC 5 FprEN 16603-32-01 Space engineering - Fracture control 1/3/2014 Mechanical Engineering

UAP CEN/CLC/TC 5 FprEN 16603-32-02 1/3/2014 Mechanical EngineeringUAP CEN/CLC/TC 5 FprEN 16603-32-03 Space engineering - Structural finite element models 1/3/2014 Mechanical EngineeringUAP CEN/CLC/TC 5 FprEN 16603-32-10 1/3/2014 Mechanical Engineering

UAP CEN/CLC/TC 5 FprEN 16603-40 Space engineering - Software 1/3/2014 Mechanical Engineering

UAP CEN/TC 147 EN 13000:2010/FprA1 Cranes - Mobile cranes 1/3/2014 Mechanical Engineering

FV CEN/TC 168 FprEN ISO 16841 1/3/2014 Mechanical EngineeringUAP CEN/CLC/TC 5 FprEN 16603-32-11 Space engineering - Modal survey assessment 1/17/2014 Mechanical Engineering

UAP CEN/CLC/TC 5 FprEN 16603-34 17-Jan-14 Mechanical Engineering

UAP CEN/CLC/TC 5 FprEN 16603-35 Space engineering - Propulsion general requirements 1/17/2014 Mechanical Engineering

UAP CEN/CLC/TC 5 FprEN 16603-35-01 1/17/2014 Mechanical Engineering

UAP CEN/CLC/TC 5 FprEN 16603-35-02 1/17/2014 Mechanical EngineeringUAP CEN/CLC/TC 5 FprEN 16603-35-03 Space engineering - Liquid propulsion for launchers 1/17/2014 Mechanical Engineering

PE CEN/TC 114 prEN ISO 14120 1/17/2014Mechanical Engineering

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2010/DAM 1:2013)

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO/DIS 14405-1:2013)Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 2: Operational requirements (ISO/DIS 20421-2:2013)Cryogenic vessels - Static vacuum insulated vessels - Part 2: Operational requirements (ISO/DIS 21009-2:2013)Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO/DIS 14172:2013)Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO/DIS 15614-7:2013)Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO/DIS 17632:2013)Resistance welding - Weldability - Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials (ISO/DIS 18278-1:2013)Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO/DIS 636:2013)

Shell boilers - Part 3: Design and calculation for pressure partsLeather - Physical and mechanical tests - Determination of water absorption by capillary action (wicking) (ISO/DIS 19074:2013)

Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO/DIS 1660:2013)

CEN/SS T01Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012/DAM 1:2013)

CEN/SS T01

Small craft - Electrical/electronic control systems for steering, shift and throttle (ISO 25197:2012/DAM 1:2013)

CEN/SS T01

Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO/DIS 18854:2013)Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO/DIS 19901-5:2013)Industrial valves - Requirements and testing for metallic valves as pressure accessoriesSelf-propelled agricultural machines - Road safety - Basic requirements

Steel static storage systems - Adjustable pallet racking systems - Principles for seismic design

Flat products made of steels for pressure purposes - Part 7: Stainless steels

Hot rolled weldable steel bars for pressure purposes with specified elevated temperature propertiesMethod for the derivation of minimum values of proof strength of steel at elevated temperaturesCold rolled non-oriented electrical steel sheet and strip delivered in the fully processed stateThin magnetic steel sheet and strip for use at medium frequenciesSpecification and approval of welding procedures for production welding of steel castings (ISO/DIS 11970:2013)Conveyor belts for general purpose use - Electrical and flammability safety requirements

Conveyor belts for use in underground installations - Electrical and flammability safety requirements

Small craft - Owner's manual (ISO 10240:2004/DAM 1:2013)

Agricultural and forestry tractors - Passenger seat - Requirements and test procedures

Small craft - Electric navigation lights - Performance (ISO/DIS 19009:2013)Agricultural machinery - Equipment for sowing - Minimization of the environmental effects of fan exhaust from pneumatic systems (ISO/DIS 17962:2013)Alloyed steels - Determination of Nickel content - Inductively coupled plasma optical emission spectrometric methodNon-destructive testing - Terminology - Terms used in magnetic particle testing (ISO/DIS 12707:2013)Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO/FDIS 5826:2013)Welding consumables - Welding consumables for hard-facingConveyor belts - Fire simulation flammability testing - Part 1: Propane burner testsGeometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO/FDIS 1938-1:2013)Petroleum and natural gas industries - Drilling and production equipment - Shallow gas diverter equipment (ISO/FDIS 13354:2013)Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections

Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO/FDIS 14114:2013)Building automation and control systems (BACS) - Part 5: Data communication protocol (ISO/FDIS 16484-5:2013)

Building automation and control systems (BACS) - Part 6: Data communication conformance testing (ISO/FDIS 16484-6:2013)Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO 10113:2006)

Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent (ISO 10275:2007)Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use

Gas infrastructure - Gas measuring systems - Functional requirements

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirementsRubber and plastic hoses and tubings for use with propane, butane and their mixtures in the vapour phaseGas infrastructure - Welding steel pipework - Functional requirementsSpace engineering - Method for the calculation of radiation received and its effects, and a policy for design margins

Space engineering - Photovoltaic assemblies and components

Space engineering - Structural design and verification of pressurized hardware

Space engineering - Structural factors of safety for spaceflight hardware

Steel wire ropes - Pulling eyes for rope installation - Types and minimum requirements (ISO/FDIS 16841:2013)

Space engineering - Environmental control and life support (ECLS)

Space engineering - Liquid and electric propulsion for spacecraftSpace engineering - Solid propulsion for spacecrafts and launchers

Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (ISO/DIS 14120:2013)

https://projex.cen.eu/online/PgCommittee.aspx?PAGE=TB&VIEW=WI&TB=4452827


UAP CEN/CLC/TC 5 FprEN 16601-00-01 Space systems - Glossary of terms 1/17/2014 Mechanical EngineeringUAP CEN/CLC/TC 5 FprEN 16602-10-04 Space product assurance - Critical-item control 1/17/2014 Mechanical Engineering


UAP CEN/CLC/TC 5 FprEN 16603-31 Space engineering - Thermal control general requirements 1/17/2014 Mechanical Engineering

UAP CEN/CLC/TC 5 FprEN 16603-32 Space engineering - Structural general requirements 1/17/2014 Mechanical Engineering



UAP CEN/CLC/TC 5 FprEN 16603-50 Space engineering - Communications 1/17/2014 Mechanical EngineeringUAP CEN/CLC/TC 5 FprEN 16603-50-02 Space engineering - Ranging and Doppler tracking 17-Jan-14 Mechanical EngineeringUAP CEN/CLC/TC 5 FprEN 16603-50-05 Space engineering - Radio frequency and modulation 1/17/2014 Mechanical Engineering

UAP CEN/CLC/TC 5 FprEN 16603-50-13 1/17/2014Mechanical Engineering

UAP CEN/CLC/TC 5 FprEN 16603-50-14 Space engineering - Spacecraft discrete interfaces 1/17/2014 Mechanical Engineering

UAP CEN/CLC/TC 5 FprEN 16603-50-51 Space engineering - SpaceWire - protocol identification 1/17/2014 Mechanical Engineering


UAP CEN/CLC/TC 5 FprEN 16603-60-10 Space engineering - Control performances 1/17/2014 Mechanical Engineering


UAP CEN/CLC/TC 5 FprEN 16604-10 1/17/2014Mechanical Engineering

UAP CEN/SS M11 FprEN ISO 22068 1/17/2014 Mechanical Engineering

PE CEN/TC 114 EN ISO 13849-1:2008/prA1 1/17/2014Mechanical Engineering

PE CEN/TC 153 prEN 12331 1/17/2014 Mechanical Engineering

UAP CEN/CLC/TC 5 FprEN 16602-20 Space product assurance - Quality assurance 1/17/2014 Mechanical Engineering



UAP CEN/CLC/TC 5 FprEN 16602-30-09 Space product assurance - Availability analysis 1/17/2014 Mechanical Engineering


PE CEN/TC 143 prEN ISO 6103 1/17/2014Mechanical Engineering

FV CEN/TC 151 FprEN 12110 Tunnelling machines - Air locks - Safety requirements 1/17/2014 Mechanical Engineering

FV CEN/TC 151 FprEN 16228-1 1/17/2014 Mechanical Engineering







UAP CEN/CLC/TC 5 FprEN 16602-30-11 Space product assurance - Derating - EEE components 1/17/2014 Mechanical Engineering

UAP CEN/CLC/TC 5 FprEN 16602-40-02 Space product assurance - Hazard analysis 1/17/2014 Mechanical Engineering


UAP CEN/CLC/TC 5 FprEN 16602-60-02 Space product assurance - ASIC and FPGA development 1/17/2014 Mechanical Engineering







PE CEN/TC 147 prEN 13001-3-5 1/17/2014 Mechanical Engineering











UAP CEN/CLC/TC 5 FprEN 16602-70-29 3/3/2014

Mechanical Engineering






UAP CEN/CLC/TC 5 prEN 16602-70-20 3/3/2014Mechanical Engineering


PE CEN/TC 150 prEN 1459-2 rev 3/3/2014 Mechanical Engineering

PE CEN/TC 114 prEN ISO 14122-1 rev 4/21/2014Mechanical Engineering

PE CEN/TC 114 prEN ISO 14122-2 rev 4/21/2014Mechanical Engineering

PE CEN/TC 153 prEN 13870 rev 4/21/2014 Mechanical Engineering


Safety of Industrial Trucks - Dynamic tests for verification of lateral stability - Counterbalanced Trucks

Space product assurance - Nonconformance control system

Space engineering - Cleanliness requirements for spacecraft propulsion hardwareSpace engineering - Compatibility testing for liquid propulsion components, subsystems and systems

Space engineering - Interface and communication protocol for MIL-STD-1553B data bus onboard spacecraft

Space engineering - SpaceWire - Remote memory access protocol

Space engineering - Star sensor terminology and performance specification

Space sustainability - Adoption Notice of ISO 24113: Space systems - Space debris mitigation requirementsSintered-metal injection-moulded materials - Specifications (ISO 22068:2012)

Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006/DAM 1:2013)Food processing machinery - Mincing machines - Safety and hygiene requirements

Space product assurance - Off-the-shelf items utilization in space systemsSpace product assurance - Failure modes, effects (and criticality) analysis (FMEA/FMECA)

Space engineering - Test and operations procedure languageBonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing (ISO/DIS 6103:2013)

Drilling and foundation equipment - Safety - Part 1: Common requirementsDrilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and miningDrilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)Drilling and foundation equipment - Safety - Part 4: Foundation equipmentDrilling and foundation equipment - Safety - Part 5: Diaphragm walling equipmentDrilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipmentDrilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment

Space product assurance - Fault tree analysis - Adoption notice ECSS/IEC 61025

Space product assurance - Generic procurement requirements for hybrids

Space product assurance - Design, selection, procurement and use of die form monolithic microwave integrated circuits (MMICs)Space product assurance - Relifing procedure - EEE componentsSpace product assurance - Radiation hardness assurance - EEE componentsSpace product assurance - Cleanliness and contamination controlSpace product assurance - Thermal vacuum outgassing test for the screening of space materialsCranes - General design - Part 3-5: Limit states and proof of competence of forged hooksSpace product assurance - Black-anodizing of metals with inorganic dyes

Space product assurance - Thermal testing for the evaluation of space materials, processes, mechanical parts and assembliesSpace product assurance - Detection of organic contamination surfaces by infrared spectroscopySpace product assurance - Particle and UV radiation testing for space materialsSpace product assurance - Verification and approval of automatic machine wave solderingSpace product assurance - Preparation, assembly and mounting of RF coaxial cablesSpace product assurance - Flammability testing for the screening of space materialsSpace product assurance - Control of limited shelf-life materialsSpace product assurance - Crimping of high-reliability electrical connectionsSpace product assurance - Repair and modification of printed circuit board assemblies for space use

Space product assurance - Determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartmentSpace product assurance - Wire wrapping of high-reliability electrical connectionsSpace product assurance - Application of paints and coatings on space hardwareSpace product assurance - Material selection for controlling stress-corrosion crackingSpace engineering - Space data links - Telemetry synchronization and channel codingSpace engineering - Space data links - Telemetry transfer frame protocolSpace product assurance - Determination of the susceptibility of silver-plated copper wire and cable to "red-plague" corrosionSpace engineering - Space data links - Telecommand protocols, synchronization and channel codingRough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks

Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels (ISO/DIS 14122-1:2013)Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO/DIS 14122-2:2013)Food processing machinery - Portion cutting machines - Safety and hygiene requirements

Welding - Arc stud welding of metallic materials (ISO/FDIS 14555:2013)

FV CEN/TC 185 FprEN ISO 21670 rev 2/12/2014Mechanical Engineering

Enquiry CEN/TC 54 EN 13445-6:2009/prA1 4/12/2014Mechanical Engineering


Enquiry ECISS/TC 102 prEN ISO 4829-2 rev 4/12/2014Mechanical Engineering

Enquiry ECISS/TC 102 prEN ISO 4938 rev 4/12/2014Mechanical Engineering





FV CEN/SS C20 FprEN 16701 2/9/2014Mechanical Engineering

UAP CEN/TC 128 FprEN 12326-1 5/9/2014Mechanical Engineering










UAP CEN/TC 219 FprEN ISO 15589-2 1/5/2014 INDUSTRIAL APPLICATIONS



Enquiry CEN/TC 132 prEN 1559-4 1/5/2014 INDUSTRIAL APPLICATIONS

UAP CEN/TC 132 FprEN 851 1/5/2014 INDUSTRIAL APPLICATIONS


Enquiry CEN/TC 132 prEN 1396 1/5/2014 INDUSTRIAL APPLICATIONS

Enquiry CEN/TC 155 EN ISO 10931:2005/prA1 1/19/2014 INDUSTRIAL APPLICATIONS

Enquiry CEN/TC 155 prEN ISO 6259-1 rev 1/19/2014 INDUSTRIAL APPLICATIONS

Enquiry CEN/TC 155 prEN ISO 6259-3 1/19/2014 INDUSTRIAL APPLICATIONS

FV CEN/TC 172 FprEN ISO 12625-3 12/20/2013 INDUSTRIAL APPLICATIONS

Enquiry CEN/TC 139 prEN ISO 3233-3 rev 2/20/2014 INDUSTRIAL APPLICATIONS


UAP CEN/TC 249 FprEN ISO 20753 Plastics - Test specimens (ISO 20753:2008) 31/2/2014 INDUSTRIAL APPLICATIONS


Enquiry CEN/TC 155 prEN ISO 17778 31/2/2014 INDUSTRIAL APPLICATIONS

UAP CEN/TC 262 FprEN ISO 17081 2/12/2014 INDUSTRIAL APPLICATIONS


UAP CEN/TC 248 FprEN ISO 10306 rev 2/19/2014 INDUSTRIAL APPLICATIONS










PE CEN/TC 46 prEN 16647 1/3/2014 HEATING COOLING & VENTILATION

PE CEN/TC 107 EN 15632-1:2009/prA1 1/3/2014 HEATING COOLING & VENTILATION



FV CEN/TC 195 FprEN ISO 10121-1 1/17/2014 HEATING COOLING & VENTILATION

Fasteners - Hexagon weld nuts with flange (ISO/FDIS 21670:2013)

Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron

Non-destructive testing - Acoustic emission - Leak detection by means of acoustic emissionSteel and iron - Determination of total silicon content - Reduced molybdosilicate spectrophotometric method - Part 2: Silicon contents between 0,01 and 0,05 % (ISO/DIS 4829-2:2013)

Steel and irons - Determination of nickel content - Gravimetric or titrimetric method (ISO/DIS 4938:2013)

Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO/DIS 16230-1:2013)

Road restraint systems - Part 5: Product requirements, test and assessment methods and acceptance criteria

Bituminous mixtures - Test methods for hot mix asphalt - Part 16: Abrasion by studded tyres

Pedestal and wall-hung bidets with over-rim supply - Connecting dimensions

Energetic materials for Defence - Safety, vulnerability - Friability

Slate and stone for discontinuous roofing and external cladding - Part 1: Specifications for slate and carbonate slate

Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass (ISO/DIS 1288-1:2014)

Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double-ring test on flat specimens with large test surface areas (ISO/DIS 1288-2:2014)

Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four-point bending) (ISO/DIS 1288-3:2014)

Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel-shaped glass (ISO/DIS 1288-4:2014)

Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double-ring test on flat specimens with small test surface areas (ISO/DIS 1288-5:2014)

Fire resistance tests for service installations - Part 1: Ventilation ducts

Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork

Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description


Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines (ISO 15589-2:2012)Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013)Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013)Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castingsAluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - SpecificationsAluminium and aluminium alloys - Circle and circle stock for general application - SpecificationsAluminium and aluminium alloys - Coil coated sheet and strip for general applications - SpecificationsPlastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005/DAM 1:2013)Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO/DIS 6259-1:2013)Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes (ISO/DIS 6259-3:2013)Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO/FDIS 12625-3:2013)Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO/DIS 3233-3:2013)Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO/DIS 12625-9:2013)

Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract (ISO 15181-6:2012)Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships (ISO/DIS 17778:2013)Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique (ISO/FDIS 17081:2013)Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:2013)Textiles - Cotton fibres - Evaluation of maturity by the air flow method (ISO/FDIS 10306:2013)Textiles - Determination of the phthalate content - Tetrahydrofuran method (ISO/FDIS 14389:2013)Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO/DIS 13802:2013)Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test (ISO/DIS 20200:2013)Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungiPaints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algaeCoil coated metals - Test methods - Part 15: MetamerismCoil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxideTextiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO/DIS 12947-2:2014)CEN Technical

CommitteeFireplaces for liquid fuels - Decorative appliances producing a flame using alcohol based or gelatinous fuel - Use in private householdsDistrict heating pipes - Pre-insulated flexible pipe systems - Part 1: Classification, general requirements and test methods

District heating pipes - Pre-insulated flexible pipe systems - Part 2: Bonded plastic service pipes - Requirements and test methodsDistrict heating pipes - Pre-insulated flexible pipe systems - Part 3: Non bonded system with plastic service pipes - Requirements and test methods

Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 1: Gas-phase air cleaning media (ISO/FDIS 10121-1:2013)

PE CEN/TC 44 prEN ISO 23953-2 rev 4/21/2014 HEATING COOLING & VENTILATION

PE CEN/TC 107 prEN 15698-2 4/21/2014 HEATING COOLING & VENTILATION

TYPE Standard Code Standard Title 12/3/2013 CYS CEN/TCs MIRROR COMMITTEES

Enquiry CEN/TC 292 prEN 14429 1/5/2014 CHEMICALS AND ENVIRONMENT




Enquiry CEN/TC 345 prEN ISO 11074 Soil quality - Vocabulary (ISO/DIS 11074:2013) 1/5/2014 CHEMICALS AND ENVIRONMENT

UAP CEN/TC 345 FprEN ISO 10693 1/5/2014 CHEMICALS AND ENVIRONMENT








UAP CEN/TC 164 FprEN 15362 1/19/2014 CHEMICALS AND ENVIRONMENT






Enquiry CEN/TC 332 prEN ISO 16496 31/2/2014 CHEMICALS AND ENVIRONMENT

Enquiry CEN/TC 332 prEN ISO 3819 Laboratory glassware - Beakers (ISO/DIS 3819:2013) 31/2/2014 CHEMICALS AND ENVIRONMENT


Enquiry CEN/TC 332 prEN ISO 4796-1 rev 31/2/2014 CHEMICALS AND ENVIRONMENT


Enquiry CEN/TC 332 prEN ISO 3819 Laboratory glassware - Beakers (ISO/DIS 3819:2013) 31/2/2014 CHEMICALS AND ENVIRONMENT


Enquiry CEN/TC 332 prEN ISO 4796-1 rev 31/2/2014 CHEMICALS AND ENVIRONMENT

FV CEN/TC 230 FprCEN/TS 16692 1/30/2014 CHEMICALS AND ENVIRONMENT


Enquiry CEN/TC 165 prEN 1610 Construction and testing of drains and sewers 4/5/2014 CHEMICALS AND ENVIRONMENT





FV CEN/TC 264 FprEN 12341 2/15/2014 CHEMICALS AND ENVIRONMENT


Enquiry CEN/TC 19 prEN ISO 4263-3 1/19/2014 SOLID, LIQUID & GASEOUS FUELS



Enquiry CEN/TC 335 prEN ISO 18122 1/19/2014 SOLID, LIQUID & GASEOUS FUELS

Enquiry CEN/TC 335 prEN ISO 18123 1/19/2014 SOLID, LIQUID & GASEOUS FUELS




FV CEN/TC 335 FprEN ISO 17225-1 1/5/2014 SOLID, LIQUID & GASEOUS FUELS



FV CEN/TC 335 FprEN ISO 17225-4 rev 1/5/2014 SOLID, LIQUID & GASEOUS FUELS


FV CEN/TC 335 FprEN ISO 17225-6 rev 1/5/2014 SOLID, LIQUID & GASEOUS FUELS


FV CEN/TC 19 FprEN 16476 1/19/2014 SOLID, LIQUID & GASEOUS FUELS

FV CEN/TC 19 FprEN 14078 2/15/2014 SOLID, LIQUID & GASEOUS FUELS


Enquiry CEN/TC 102 prEN 16442 1/24/2014 HEALTHCARE

Enquiry CEN/TC 205 prEN ISO 8536-10 2/3/2014 HEALTHCARE




Enquiry CEN/TC 205 prEN ISO 1135-4 rev 2/3/2014 HEALTHCARE


Refrigerated display cabinets - Part 2: Classification, requirements and test conditions (ISO/DIS 23953-2:2013)

District heating pipes - Preinsulated bonded twin pipe systems for directly buried hot water networks - Part 2: Fitting and valve assembly of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene


Characterisation of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base additionCharacterisation of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH controlCharacterisation of waste - Leaching behaviour test for basic characterisation - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditionsCharacterisation of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity

Soil quality - Determination of carbonate content - Volumetric method (ISO 10693:1995)Soil quality - Determination of dry bulk density (ISO 11272:1998)Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:1998 + C1:2009)Soil quality - Determination of unsaturated hydraulic conductivity and water-retention characteristic - Wind's evaporation method (ISO 11275:2004)Soil quality - Determination of pore water pressure - Tensiometer method (ISO 11276:1995)Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method (ISO 11461:2001)Soil quality - Determination of particle density (ISO 11508:1998)Soil quality - Guidance on leaching procedures for subsequent chemical and ecotoxicological testing of soils and soil materials (ISO 18772:2008)Chemicals used for treatment of swimming pool water - Sodium carbonateChemicals used for treatment of swimming pool water - ChlorineChemicals used for treatment of swimming pool water - Hydrochloric acidWater quality - Determination of polycyclic aromatic hydrocarbons (PAH) in whole water samples using liquid solid extraction combined with gas chromatography mass spectrometry (GC-MS)Water quality - Determination of organochlorine pesticides (OCP) in whole water samples using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)Water quality - Determination of pentabromodiphenyl ether (PBDE) in whole water samples using solid phase extraction (SPE) with SPE-disks combined with gas chromatography - mass spectrometry (GC-MS)Laboratory glassware - Vacuum-jacketed vessels for heat insulation (ISO/DIS 16496:2013)

Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO/DIS 384:2013)Laboratory glassware - Bottles - Part 1: Screw-neck bottles (ISO/DIS 4796-1:2013)

Laboratory glassware - Vacuum-jacketed vessels for heat insulation (ISO/DIS 16496:2013)

Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments

(ISO/DIS 384:2013)Laboratory glassware - Bottles - Part 1: Screw-neck

bottles (ISO/DIS 4796-1:2013)Water quality - Determination of tributyl tin (TBT) in whole water samples using solid phase extraction

(SPE) and gas chromatography with triple quadrupole mass spectrometry

Characterization of waste - Preparation of test portions from the laboratory sample

Water quality - Guidance on the estimation of microalgal biovolume

Water quality - Guidance on quantitative and qualitative sampling of phytoplankton from inland waters

Chemicals used for treatment of water intended for human consumption - Half-burnt dolomite

Chemicals used for treatment of water intended for human consumption - High-calcium limeAmbient air - Standard gravimetric measurement

method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

CEN Technical Committee Petroleum and related products - Determination of the

ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids (ISO/DIS 4263-3:2013)Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO/DIS 17831-1:2013)Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes (ISO/DIS 17831-2:2013)Solid biofuels - Determination of ash content (ISO/DIS 18122:2013)Solid biofuels - Determination of the content of volatile matter (ISO/DIS 18123:2013)Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method (ISO/DIS 18134-1:2013)Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method (ISO/DIS 18134-2:2013)Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis simple (ISO/DIS 18134-3:2013)Solid biofuels - Fuel specifications and classes - Part 1: General requirements (ISO/FDIS 17225-1:2013)Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets (ISO/FDIS 17225-2:2013)Solid biofuels - Fuel specifications and classes - Part 3: Graded wood briquettes (ISO/FDIS 17225-3:2013)Solid biofuels - Fuel specifications and classes - Part 4: Graded wood chips (ISO/FDIS 17225-4:2013)Solid biofuels - Fuel specifications and classes - Part 5: Graded firewood (ISO/FDIS 17225-5:2013)Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets (ISO/FDIS 17225-6:2013)Solid biofuels - Fuel specifications and classes - Part 7: Graded non-woody briquettes (ISO/FDIS 17225-7:2013)Liquid Petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Methold via Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES)Liquid petroleum products - Determination of fatty methyl ester (FAME) content in middle distillates - Infrared spectrometry method


Controlled environment storage cabinet for disinfected thermolabile endoscopesInfusion equipment for medical use - Part 10: Accessories for fluid lines for single use with pressure infusion equipment (ISO/DIS 8536-10:2013)Infusion equipment for medical use - Part 11: Infusion filters for single use with pressure infusion equipment (ISO/DIS 8536-11:2013)Infusion equipment for medical use - Part 8: Infusion equipment for single use with pressure infusion apparatus (ISO/DIS 8536-8:2013)Infusion equipment for medical use - Part 9: Fluid lines for single use with pressure infusion equipment (ISO/DIS 8536-9:2013)Transfusion equipment for medical use - Part 4: Transfusion sets for single use, gravity feed (ISO/DIS 1135-4:2013)Transfusion equipment for medical use - Part 5: Transfusion sets for single use with pressure infusion apparatus (ISO/DIS 1135-5:2013)

Enquiry CEN/TC 55 prEN ISO 4823 2/14/2014 HEALTHCARE


UAP CEN/TC 205 FprEN ISO 81060-2 2/14/2014 HEALTHCARE

UAP CEN/TC 55 FprEN ISO 16635-1 2/28/2014 HEALTHCARE

Enquiry CEN/TC 414 prEN 16686 Osteopathic healthcare provision 3/7/2014 HEALTHCARE

FV CEN/TC 102 FprEN 14180 2/20/2014 HEALTHCARE

FV CEN/TC 392 FprEN 16521 2/20/2014 HEALTHCARE

Enquiry CEN/TC 55 EN ISO 13017:2012/prA1 3/27/2014 HEALTHCARE



Enquiry CEN/TC 55 EN ISO 12836:2012/prA1 5/16/2014 HEALTHCARE

Enquiry CEN/TC 204 prEN 556-2 5/16/2014 HEALTHCARE

TYPE Standard Code Standard Title CYS CEN/TCs MIRROR COMMITTEESPE CEN/TC 256 prEN 16186-2 1/3/2014 TRANSPORT & PACKAGING

FV CEN/TC 278 FprCEN ISO/TS 17427 17/1/2014 TRANSPORT & PACKAGING

PE CEN/TC 274 prEN 12312-3 17/1/2014 TRANSPORT & PACKAGING

PE CEN/TC 278 prEN ISO 12855 17/1/2014 TRANSPORT & PACKAGING

PE CEN/TC 296 prEN 16657 17/1/2014 TRANSPORT & PACKAGING



FV CEN/TC 274 FprEN 12312-14 17/1/2014 TRANSPORT & PACKAGING




PE CEN/TC 278 prEN ISO 17575-1 21/1/2014 TRANSPORT & PACKAGING

PE CEN/TC 256 prEN 13232-1 3/3/2014 TRANSPORT & PACKAGING

PE CEN/TC 256 prEN 16683 3/3/2014 TRANSPORT & PACKAGINGPE CEN/TC 278 EN ISO 14906:2011/prA1 3/3/2014 TRANSPORT & PACKAGING

PE CEN/TC 278 prEN 15531-1 rev 3/3/2014 TRANSPORT & PACKAGING





PE CEN/TC 301 prEN ISO 18541-4 21/4/2014 TRANSPORT & PACKAGING


UAP CEN/TC 136 EN 13451-3:2011/FprA2 1/10/2014 HEALTH & SAFETY

Enquiry CEN/TC 136 prEN 16664 1/10/2014 HEALTH & SAFETY

UAP CEN/TC 252 EN 1400:2013/FprA1 1/7/2014 HEALTH & SAFETY

UAP CEN/TC 252 EN 16120:2012/FprA1 Child use and care articles - Chair mounted seat 1/7/2014 HEALTH & SAFETY

Enquiry CEN/TC 207 EN 747-1:2012/prA1 1/31/2014 HEALTH & SAFETY

Enquiry CEN/TC 207 EN 747-2:2012/prA1 1/31/2014 HEALTH & SAFETY

Enquiry CEN/TC 136 prEN 13451-2 2/3/2014 HEALTH & SAFETY

Enquiry CEN/TC 211 prEN ISO 1683 rev 2/3/2014 HEALTH & SAFETY

Enquiry CEN/TC 85 prEN ISO 12312-2 2/28/2014 HEALTH & SAFETY

Enquiry CEN/TC 162 prEN 13911 rev 3/7/2014 HEALTH & SAFETY

Enquiry CEN/TC 162 prEN 16689 3/7/2014 HEALTH & SAFETY

FV CEN/TC 70 FprEN 1866-2 2/6/2014 HEALTH & SAFETY

FV CEN/TC 162 FprEN 16350 Protective gloves for electrostatical risks 2/6/2014 HEALTH & SAFETY

Enquiry CEN/TC 231 EN ISO 28927-8:2009/prA1 3/27/2014 HEALTH & SAFETY

Enquiry CEN/TC 70 prEN 3-8 4/15/2014 HEALTH & SAFETY

Enquiry CEN/TC 162 prEN ISO 9151 4/15/2014 HEALTH & SAFETY

Enquiry CEN/TC 231 EN ISO 28927-5:2009/prA1 4/15/2014 HEALTH & SAFETY

Enquiry CEN/TC 136 prEN 12491 rev 5/16/2014 HEALTH & SAFETY

Enquiry CEN/TC 136 prEN 926-1 rev 5/16/2014 HEALTH & SAFETY

Enquiry CEN/TC 137 prEN ISO 17621 5/16/2014 HEALTH & SAFETY

Enquiry CEN/TC 302 prEN ISO 8968-4 2/3/2014 FOOD & BIOTECHNOLOGY


UAP CEN/TC 307 FprEN ISO 12872 2/14/2014 FOOD & BIOTECHNOLOGY






Enquiry CEN/TC 275 prEN ISO 18744 3/7/2014 FOOD & BIOTECHNOLOGY

FV CEN/TC 275 FprEN ISO 11133 2/6/2014 FOOD & BIOTECHNOLOGY

FV CEN/SS C01 EN ISO 8589:2010/FprA1 2/6/2014 FOOD & BIOTECHNOLOGY

UAP CEN/SS C01 FprEN ISO 3493Vanilla - Vocabulary (ISO/FDIS 3493:2014)

3/17/2014 FOOD & BIOTECHNOLOGY

Dentistry - Elastomeric impression materials (ISO/DIS 4823:2013)Plastics collapsible containers for human blood and blood components - Part 4: Aphaeresis blood bag systems with integrated features (ISO/DIS 3826-4:2013)Non-invasive sphygmomanometers - Part 2: Clinical investigation of automated measurement type (ISO 81060-2:2013)Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO 16635-1:2013)

Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testingCosmetics - Analytical methods - GC/MS method for the identification and assay of 12 phthalates in cosmetic samples ready for analytical injectionDentistry - Magnetic attachments (ISO 13017:2012/DAM 1:2013)Dentistry - Periodontal curettes, dental scalers and excavators - Part 5: Jacquette scalers (ISO/DIS 13397-5:2013)Medical suction equipment - Part 1: Electrically powered suction equipment (ISO/DIS 10079-1:2013)Dentistry - Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy (ISO 12836:2012/DAM 1:2014)Sterilization of medical devices - Requirements for medical devices to be designated ''STERILE'' - Part 2: Requirements for aseptically processed medical devicesCEN Technical

CommitteeRailway applications - Driver's cab - Part 2: Integration of displays, controls and indicatorsIntelligent transport systems - Co-operative systems - Roles and responsibilities in the context of co-operative ITS based on architecture(s) for co-operative systems (ISO/DTS 17427:2013)Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehiclesElectronic fee collection - Information exchange between service provision and toll charging (ISO/DIS 12855:2013)Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanksTyre Pressure Management Systems and Tyre Pressure Gauges - Interoperability between TPMS/vehicle and TPG - Interfaces and RequirementsRoad vehicles - Supplementary grip devices for tyres of passenger cars and light duty vehicles - Safety requirements and test methodAircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehiclesIntelligent transport systems - Co-operative systems - Classification and management of ITS applications in a global context (ISO/DTS 17419:2013)Intelligent transport systems - Co-operative systems - ITS application requirements and objectives for selection of communication profiles (ISO/DTS 17423:2013)Packaging - Tamper verification features for medicinal product packagingElectronic fee collection - Application interface definition for autonomous systems - Part 1: Charging (ISO/DIS 17575-1:2013)Railway applications - Track - Switches and crossings for Vignole rails - Part 1: DefinitionsRailway applications - Call for aid and communication device - RequirementsElectronic fee collection - Application interface definition for dedicated short-range communication (ISO 14906:2011/DAM 1:2013)Public transport - Service interface for real-time information relating to public transport operations - Part 1: Context and frameworkPublic transport - Service interface for real-time information relating to public transport operations - Part 2: CommunicationsPublic transport - Service interface for real-time information relating to public transport operations - Part 3: Functional service interfaces

Railway applications - Air conditioning for main line rolling stock - Comfort parameters and type tests

Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructureRoad vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 4: Conformance test (ISO/DIS 18541-4:2013)

CEN Technical Committee Swimming pool equipment - Part 3: Additional specific

safety requirements and test methods for inlets and outlets and water/air based water leisure featuresPlaying field equipment - Lightweight goals - Functional, safety requirements and test methodsChild use and care articles - Soothers for babies and young children - Safety requirements and test methods

Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability requirementsFurniture - Bunk beds and high beds - Part 2: Test methodsSwimming pool equipment - Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bendsAcoustics - Preferred reference values for acoustical and vibratory levels (ISO/DIS 1683:2013)Eye and face protection - Sunglasses and related eyewear - Part 2: Filters for direct observation of the sun (ISO/DIS 12312-2:2013)Protective clothing for firefighters - Requirements and test methods for fire hoods for firefightersProtective clothing to be worn by firefighters during technical rescue operationsMobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Portable fire extinguishers - Part 8: Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar, which comply Protective clothing against heat and flame - Determination of heat transmission on exposure to flame (ISO/DIS 9151:2013)Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009/DAM 1:2013)Paragliding equipment - Emergency parachutes - Safety requirements and test methodsParagliding equipment - Paragliders - Part 1: Requirements and test methods for structural strengthWorkplace atmospheres - Short term detector tube measurement systems - Requirements and test methods (ISO/DIS 17621:2014)

Milk and milk products - Determination of nitrogen content - Part 4: Determination of protein and non protein nitrogen content and true protein content calculation (Reference method) (ISO/DIS 8968-4:2013)Animal and vegetable fats and oils - Gas chromatography of fatty acid methyl esters - Part 1: Guidelines on modern gas chromatography of fatty acid methy esters (ISO/DIS 12966-1:2013)

Olive oils and olive-pomace oils - Determination of the 2-glyceryl monopalmitate content (ISO 12872:2010)

Olive oils and olive-pomace oils - Determination of wax content by capillary gas chromatography (ISO 12873:2010)Vegetable fats and oils - Isomeric diacylglycerols - Determination of relative amounts of 1,2- and 1,3-diacylglycerols (ISO 29822:2009)Vegetable fats and oils - Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins) (ISO 29841:2009)Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) (ISO 6883:2007)Milk - Bacterial count - Protocol for the evaluation of alternative methods (ISO 16297:2013)Microbiology of the food chain - Detection and enumeration of Cryptosporidium and Giardia in fresh leafy green vegetables and berry fruits (ISO/DIS 18744:2013)Microbiology of food, animal feed and water - Preparation, production, storage and performance testing of culture media (ISO/FDIS 11133:2013)Sensory analysis - General guidance for the design of test rooms (ISO 8589:2010/FDAM 1:2013)





Enquiry CEN/TC 338 prEN ISO 27971 5/16/2014 FOOD & BIOTECHNOLOGY


Enquiry CEN/TC 181 prEN 14543 2/26/2014 GAS

Enquiry CEN/TC 234 prEN 1776 4/28/2014 GAS

Enquiry CEN/TC 237 prEN 12405-3 Gas meters - Conversion devices - Part 3: Flow computer 4/28/2014 GAS

FV CEN/TC 234 FprEN 12007-5 1/7/2014 GAS

FV CEN/TC 181 FprEN 16436 2/5/2014 GAS

UAP CEN/TC 234 EN 12732:2013/FprA1 1/2/2014 GAS


PE CEN TC 346 prEN 16648 Conservation of cultural heritage - Transport methods 1/2/2014 SERVICES

PE CEN TC 346 prEN 16682 2/24/2014 SERVICES

FV CEN TC 329 FprEN ISO 24801-1 14/01/2014 SERVICES





FV CEN TC 331 FprCEN/TS 15448 24/01/2014 SERVICES

Microbiology of food and animal feed - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 1: General rules for the preparation of the initial suspension and decimal dilutions Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 2: Specific rules for the preparation of meat and meat products (ISO/DIS 6887-Microbiology of food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 3: Specific rules for the preparation of fish and fishery products (ISO/DIS 6887-3:2013)Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 4: Specific rules for the preparation of miscellaneous products (ISO/DIS 6887-Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (ISO/DIS 27971:2014)

CEN Technical Committee Specification for dedicated liquefied petroleum gas

appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area useGas infrastructure - Gas measuring systems - Functional requirements

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements

Rubber and plastic hoses and tubings for use with propane, butane and their mixtures in the vapour phase

Gas infrastructure - Welding steel pipework - Functional requirements


Conservation of Cultural Heritage - Guide to the measurements of moisture content in materials

constituting movable and immovable cultural heritageRecreational diving services - Requirements for the training of recreational scuba divers - Part 1: Level 1 -

Supervised diver (ISO/FDIS 24801-1:2013)Recreational diving services - Requirements for the training of recreational scuba divers - Part 2: Level 2 -

Autonomous diver (ISO/FDIS 24801-2:2013)Recreational diving services - Requirements for the training of recreational scuba divers - Part 3: Level 3 -

Dive leader (ISO/FDIS 24801-3:2013)Recreational diving services - Requirements for the training of scuba instructors - Part 1: Level 1 (ISO/FDIS

24802-1:2013)Recreational diving services - Requirements for the training of scuba instructors - Part 2: Level 2 (ISO/FDIS

24802-2:2013)Postal services - Open standard interface between image controller and enrichment devices (OCRs, video

coding systems, voting systems)

prEN 13286-54 23/10/2011

FprEN ISO 23996 23/10/2011

FprEN ISO 24340 23/10/2011

FprEN ISO 24341 23/10/2011

FprEN ISO 24344 23/10/2011

FprEN ISO 24345 23/10/2011

FprEN ISO 24346 23/10/2011

FprEN ISO 26987 23/10/2011

FprEN 1096-1 02/10/2011

FprEN 1096-2 02/10/2011

FprEN 1096-3 02/10/2011

prEN ISO 13788 rev 09/10/2011

prEN ISO 717-1 rev 09/10/2011

prEN ISO 717-2 09/10/2011

prEN 14066 rev 09/10/2011

prEN 16301 09/10/2011

FprEN ISO 24342 16/10/2011

FprEN ISO 24343-1 16/10/2011

FprEN 1423 16/10/2011

prEN 335 rev 28/11/2011

prEN 16309 21/11/2011

EN 15050:2007/FprA1Precast concrete products - Bridge elements

21/11/2011

EN ISO 22476-2:2005/FprA1 21/09/2011

EN ISO 22476-3:2005/FprA1 21/09/2011

FprEN 1024 21/11/2011

Ο Κυπριακός Οργανισμός Τυποποίησης (CYS)

κοινοποιεί Ο Κυπριακός Οργανισμός Τυποποίησης (CYS) σας διαβιβάζει τους

τίτλους των προσχεδίων των Ευρωπαϊκών προτύπων τα

οποία τίθενται στις διαδικασίες εθνικής

διαβούλευσης και ψήφισης. Οι διαδικασίες αυτές είναι η

Δημόσια Κρίση (Public Enquiry), η Συνοπτική

Ψήφιση (Unique Acceptance Procedure - UAP) και η

Τελική Ψήφιση (Formal Vote - FV). Οι τίτλοι και ο τύπος των

προσχεδίων περιέχονται στον συνημμένο πίνακα.

Οι ενδιαφερόμενοι μπορούν να προμηθευτούν τα κείμενα

των προτύπων από τον Κυπριακό Οργανισμό

Τυποποίησης

(ΚΕΝΤΡΟ ΠΛΗΡΟΦΟΡΗΣΗΣ ΚΑΙ

ΕΞΥΠΗΡΕΤΗΣΗΣ (ΚΕΠΕ) τηλ. 22-411413/4, φαξ. 22411433

email: [email protected])

ΚΥΠΡΙΑΚΟΣ ΟΡΓΑΝΙΣΜΟΣ ΤΥΠΟΠΟΙΗΣΗΣΛεωφόρο Λεμεσού & Κώστα Αναξαγόρα 30,

3ος Όροφος, 2014 ΛευκωσίαΤ.Θ.16197 2086 Λευκωσία

Τηλ: +357 22 411411 Φαξ: +357 22 411511Ηλεκτρ. Ταχυδρ.: [email protected]

ιστοσελίδα: www.cys.org.cyUnbound and hydraulically bound mixtures - Part 54: Test method for the determination of frost susceptibility - Resistance to freezing and thawing of hydraulically bound mixtures


Resilient floor coverings - Determination of density (ISO 23996:2007)


Resilient floor coverings - Determination of thickness of layers (ISO 24340:2006)


Resilient and textile floor coverings - Determination of length, width and straightness of sheet (ISO 24341:2006)


Resilient floor coverings - Determination of flexibility and deflection (ISO 24344:2008)


Resilient floor coverings - Determination of peel resistance (ISO 24345:2006)


Resilient floor coverings - Determination of overall thickness (ISO 24346:2006)


Resilient floor coverings - Determination of staining and resistance to chemicals (ISO 26987:2008)


Glass in building - Coated glass - Part 1: Definitions and classification


Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings


Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings


Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO/DIS 13788:2011)


Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO/DIS 717-1:2011)


Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO/DIS 717-2:2011)


Natural stone test methods - Determination of resistance to ageing by thermal shock


Natural stone test methods - Determination of sensitivity to accidental staining


Resilient and textile floor -coverings - Determination of side length, edge, straightness and squareness of tiles (ISO 24342:2007)


Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007)


Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two


Durability of wood and wood- based products - Use classes: definitions, application to solid wood and wood based panels


Sustainability of construction works - Assessment of social performance of buildings - Methods



Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing - Amendment 1 (ISO 22476-2:2005/FDAM 1:2011)


Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test - Amendment 1 (ISO 22476-3:2005/FDAM 1:2011)


Clay roofing tiles for discontinuous laying - Determination of geometric characteristics


FprEN ISO 10545-16 28/11/2011

FprEN ISO 10545-6 28/11/2011

FprEN 15643-4 10/09/2011

prEN 16310 14/11/2011

prEN 16311 14/11/2011

FprEN 15906 04/09/2011

FprEN ISO 10545-4 07/11/2011

prEN 15497 25/12/2011

prEN 14342 rev 25/12/2011

FprEN 12697-19 25/12/2012

FprEN 12697-20 25/12/2012

FprEN 12697-21 25/12/2012

FprEN 12697-30 25/12/2012

prEN 16276Evacuation Lighting in Road Tunnels 05/10/2011

prEN 1838Lighting applications - Emergency lighting 05/10/2011

FprEN 50083-2:2011 11/10/2011

FprEN 50411-2-2:2011 11/10/2011

FprEN 50411-2-3:2011 11/10/2011

FprEN 50411-2-4:2011 11/10/2011

11/10/2011

11/10/2011

11/10/2011

11/10/2011

11/10/2011

11/10/2011

11/10/2011

11/10/2011

11/10/2011

11/10/2011

EN 50416:2005/FprAB:2011 11/10/2011

Ceramic tiles - Part 16: Determination of small colour differences (ISO 10545-16:2010)


Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles (ISO 10545-6:2010)


Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance


Engineering consultancy services - Terminology at a high level to describe the engineering services in construction of buildings, infrastructure and industrial facilities


Engineering consultancy services - Terminology at a high level to describe the engineering services for industrial products


Winter maintenance equipment - Snow removal machines with rotating tools - Specification and clearing capacity


Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2004)


Structural finger jointed solid timber - Performance requirements and minimum production requirements


Wood flooring - Characteristics, evaluation of conformity and marking


Bituminous mixtures - Test methods for hot mix asphalt - Part 19: Permeability of specimen


Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation using cube or cylindrical specimens (CY)


Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens


Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation by impact compactor


ELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND

ELECTRICAL & ELECTRONIC DEVICESELECTRICAL, ELECTRONIC &

MEDICAL EQUIPMENT AND ELECTRICAL & ELECTRONIC

DEVICESCable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment


ELECTRICAL & ELECTRONIC DEVICESFibre organisers and closures to be used in optical fibre

communication systems - Product specifications - Part 2-2: Sealed pan fibre splice closures Type 1, for category S & A



communication systems - Product specifications - Part 2-3: Sealed inline fibre splice closures Type 1, for category S & A



communication systems - Product specifications - Part 2-4: Sealed dome fibre splice closures Type 1, for category S & A


ELECTRICAL & ELECTRONIC DEVICESEN

60335-2-37:2002/FprAA:2011Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers



60335-2-39:2003/FprAA:2011Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans



60335-2-42:2003/FprAA:2011Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens



60335-2-47:2003/FprAA:2011Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans



60335-2-48:2003/FprAA:2011Household and similar electrical applicances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters



60335-2-49:2003/FprAB:2011Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm



60335-2-58:2005/FprAC:2011Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines



60335-2-64:2000/FprAB:2011Safety of household and similar electrical appliances - Part 2-64: Particular requirements for commercial electric kitchen machines



60335-2-65:2003/FprAA:2011Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances



60335-2-36:2002/FprAA:2011Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements


ELECTRICAL & ELECTRONIC DEVICESHousehold and similar electrical appliances - Safety -

Particular requirements for commercial electric conveyor dishwashing machines


ELECTRICAL & ELECTRONIC DEVICES

11/10/2011

FprEN 60191-6-1:2011 11/10/2011

FprHD 60364-5-557:2011 11/10/2011

FprEN 50569:2011 18/10/2011

FprEN 50570:2011 18/10/2011

EN 60269-4:2009/FprA1:2011 18/10/2011

FprEN 60598-2-24:2011 18/10/2011

FprEN 60512-99-001:2011 18/10/2011

18/10/2011

FprEN 61499-1:2011 Function blocks - Part 1: Architecture 18/10/2011

FprEN 61291-1:2011 Optical amplifiers - Part 1: Generic specification 18/10/2011

prEN 50465:2011 02/11/2011

02/11/2011

FprEN 60679-3:2011 02/11/2011

FprEN 61010-2-201:2011 02/11/2011

FprEN 61757-1:2011 Fibre optic sensors - Part 1: Generic specification 07/09/2011

FprEN 61499-2:2011 Function blocks - Part 2: Software requirements 09/11/2011

FprEN 60794-2-11:2011 09/11/2011

FprEN 60794-2-21:2011 09/11/2011

FprEN 60794-2-31:2011 09/11/2011

FprEN 62595:2011 09/11/2011

09/11/2011

EN 61591:1997/prAA:2011 09/11/11

prEN 50491-6-1:2011 09/11/11

prEN 50547:2011 16/11/2011

prEN 1631011/14/2011

prEN 1631111/14/2011

FprHD 60364-7-722:2011 16/11/2011

EN 60810:2003/FprA2:2011 Lamps for road vehicles - Performance requirements 16/11/2011

FprEN 60917-2-5:2011 16/11/2011

FprEN 62628:2011 Guidance on software aspects of dependability 16/11/2011

FprEN 60191-4:2011 Mechanical standardization of semiconductor devices - Part 4: Coding system and classification into forms of package outlines for semiconductor device packages


ELECTRICAL & ELECTRONIC DEVICESMechanical standardization of semiconductor devices - Part

6-1: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for gull-wing lead terminals


ELECTRICAL & ELECTRONIC DEVICESLow-voltage electrical installations - Part 5-557: Selection

and erection of electrical equipment - Auxiliary circuitsELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND

ELECTRICAL & ELECTRONIC DEVICESHousehold and similar electrical appliances - Safety -

Particular requirements for commercial electric spin extractors


ELECTRICAL & ELECTRONIC DEVICES Household and similar electrical appliances - Safety -

Particular requirements for commercial electric tumble dryers


ELECTRICAL & ELECTRONIC DEVICESLow-voltage fuses - Part 4: Supplementary requirements for

fuse-links for the protection of semiconductor devicesELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND

ELECTRICAL & ELECTRONIC DEVICESLuminaires - Part 2-24: Particular requirements - Luminaires

with limited surface temperaturesELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND

ELECTRICAL & ELECTRONIC DEVICESTest schedule for engaging and separating connectors

under electrical load - Part 60512-99-001: Connectors used in twisted pair communication cabling with remote power



60601-1-8:2007/FprA1:2011 Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment




DEVICESELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND

ELECTRICAL & ELECTRONIC DEVICESGas appliances - Combined heat and power appliance of

nominal heat input inferior or equal to 70 kWELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND

ELECTRICAL & ELECTRONIC DEVICESFprEN 50144-2-7:2011 Safety of hand-held electric motor operated tools - Part 2-7:

Particular requirements for spray gunsELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND

ELECTRICAL & ELECTRONIC DEVICESQuartz crystal controlled oscillators of assessed quality -

Part 3: Standard outlines and lead connectionsELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND

ELECTRICAL & ELECTRONIC DEVICESSafety requirements for electrical equipment for

measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment




DEVICESELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND

ELECTRICAL & ELECTRONIC DEVICESOptical fibre cables - Part 2-11: Indoor optical fibre cables -

Detailed specification for simplex and duplex cables for use in premises cabling


ELECTRICAL & ELECTRONIC DEVICESOptical fibres cables - Part 2-21: Indoor optical fibre cables -

Detailed specification for multi-fibre optical distribution cables for use in premises cabling


ELECTRICAL & ELECTRONIC DEVICESOptical fibre cables - Part 2-31: Indoor optical fibre cables -

Detailed specification for optical fibre ribbon cables for use in premises cabling


ELECTRICAL & ELECTRONIC DEVICESElectro-optical measurement methods of LED backlight unit

for liquid crystal displaysELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND


55016-2-1:2009/FprA2:2011Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements


ELECTRICAL & ELECTRONIC DEVICESHousehold range hoods and other cooking fume extractors -

Methods for measuring performanceELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND

ELECTRICAL & ELECTRONIC DEVICESGeneral requirements for Home and Building Electronic

Systems (HBES) and Building Automation and Control Systems (BACS) - Part 6-1: HBES installations - Installation and planning


ELECTRICAL & ELECTRONIC DEVICESRailway applications - Batteries for auxiliary power supply

systemsELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND

ELECTRICAL & ELECTRONIC DEVICESEngineering consultancy services - Terminology at a high

level to describe the engineering services in construction of buildings, infrastructure and industrial facilities


ELECTRICAL & ELECTRONIC DEVICESEngineering consultancy services - Terminology at a high

level to describe the engineering services for industrial products


ELECTRICAL & ELECTRONIC DEVICESLow voltage electrical installations - Part 7-722:

Requirements for special installations or locations - Supply of Electric vehicle




DEVICESModular order for the development of mechanical structures for electronic equipment practices - Part 2-5: Cabinet interface dimensions for miscellaneous equipment




DEVICES

EN 13032-1:2004/FprA1 11/14/2011

FprEN 62196-2:201111/14/2011

FprEN 50388:2011 06/12/2011

FprEN 62567:2011 06/12/2011

FprEN 62568:2011 Method for fatigue testing of conductors for overhead lines 06/12/2011

FprEN 61587-4:2011 06/12/2011

06/12/2011

06/12/2011

FprEN 60974-2:2011 Arc welding equipment - Part 2: Liquid cooling systems 06/12/2011

prEN 50565-1:2011 12/6/2011

EN 61347-1:2008/FprA2:2011 Lamp controlgear - Part 1: General and safety requirements 20/12/2011

FprEN 61300-2-11:2011 25/10/2011

FprEN 62664-1-1:2011 25/10/2011

FprEN 61300-3-44:2011 25/10/2011

FprEN 62665:2011 25/10/2011

FprEN 62209-1:2011 20/12/2011

FprEN 60669-2-5:2011 06/12/2011

06/12/2011

EN 50360:2001/FprAA 06/12/2011

FprEN 62087:2011 06/12/2011

FprEN 61850-10:2011 06/12/2011

FprEN 61968-11:2011 06/12/2011

FprEN 60793-1-54:2011 06/12/2011

FprEN 60793-2-30:2011 06/12/2011

13/12/2011

13/12/2011

EN 60061-1:1993/FprA48:2011 13/12/2011

EN 60061-2:1993/FprA45:2011 13/12/2011

EN 60061-3:1993/FprA46:2011 13/12/2011

FprEN 61499-4:2011 Function blocks - Part 4: Rules for compliance profiles 13/12/2011

FprEN 60876-1:2011 13/12/2011

Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format


ELECTRICAL & ELECTRONIC DEVICESPlugs, socket-outlets, vehicle connectors and vehicle inlets -

Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories


ELECTRICAL & ELECTRONIC DEVICESRailway Applications - Power supply and rolling stock -

Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability


ELECTRICAL & ELECTRONIC DEVICESMethods for testing self-damping characteristics of stranded

conductors for overhead linesELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND



DEVICESMechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 4: Combination of performance levels for modular cabinets



60745-2-3:2011/FprA2:2011Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders



55016-2-3:2010/FprA2:2011 (fragment 2)

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements




DEVICESElectric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V - Part 1: General guidance




DEVICESFibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests - Axial compression


ELECTRICAL & ELECTRONIC DEVICESFibre optic interconnecting devices and passive components

- Fibre optic connector product specifications - Part 1-1: LC-PC duplex multi mode connectors terminated on IEC 60793-2 category A1a fibre


ELECTRICAL & ELECTRONIC DEVICESFibre optic interconnecting devices and passive components

- Basic test and measurement procedures - Part 3-44: Examinations and measurements - Fibre optic transceiver receptacle endface visual and automated inspection


ELECTRICAL & ELECTRONIC DEVICESMultimedia systems and equipment - Multimedia e-

publishing and e-books technologies - Texture map for auditory presentation of printed texts


ELECTRICAL & ELECTRONIC DEVICES Human exposure to radio frequency fields from hand-held

and body-mounted wireless communication devices human models, instrumentation, and procedures - Part 1: Procedure to determine the specific absorption rate (sar) for


ELECTRICAL & ELECTRONIC DEVICESSwitches for household and similar fixed electrical

installations - Part 2-5: Switches and related accessories for use in home and building electronic systems (HBES)


ELECTRICAL & ELECTRONIC DEVICESFprEN

60669-2-5:2011/FprAA:2011Switches for household and similar fixed electrical installations - Part 2-5: Switches and related accessories for use in home and building electronic systems (HBES)


ELECTRICAL & ELECTRONIC DEVICESProduct standard to demonstrate the compliance of mobile

phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz)


ELECTRICAL & ELECTRONIC DEVICESMethods of measurement for the power consumption of

audio, video and related equipmentELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND

ELECTRICAL & ELECTRONIC DEVICESCommunication networks and systems for power utility

automation - Part 10: Conformance testingELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND

ELECTRICAL & ELECTRONIC DEVICES Application integration at electric utilities - System

interfaces for distribution management - Part 11: Common information model (CIM) extensions for distribution


ELECTRICAL & ELECTRONIC DEVICESOptical fibres - Part 1-54: Measurement methods and test

procedures - Gamma irradiationELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND

ELECTRICAL & ELECTRONIC DEVICES Optical fibres - Part 2-30: Product specifications - Sectional

specification for category A3 multimode fibresELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND


60335-2-30:2009/FprAA:2011Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters



60335-2-54:2008/FprAA:2011Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam


ELECTRICAL & ELECTRONIC DEVICESLamp caps and holders together with gauges for the control

of interchangeability and safety - Part 1: Lamp capsELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND


of interchangeability and safety - Part 2: LampholdersELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND


of interchangeability and safety - Part 3: GaugesELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND



DEVICESFibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification



FprEN 61400-12-2:2011 13/12/2011

EN 60749-27:2006/FprA1:2011 27/12/2011

FprEN 62512:2011 27/12/2011

FprEN 61131-3:2011 Programmable controllers - Part 3: Programming languages 27/12/2011

FprEN 60695-2-10:2011 27/12/2011

FprEN 60695-11-2:2011 27/12/2011

FprEN 60695-11-10:2011 27/12/2011

FprEN 60695-11-20:2011 27/12/2011

prHD 50573-5-57:2011 Electrical devices coordination 12/27/2011

prEN 50566:2011 03/01/2012

prEN 60312-1:2011 03/01/2012

FprEN 60705:2011 03/01/2012

FprEN 60695-2-11:2011 03/01/2012

EN 62097:2009/FprA1:2011 03/01/2012

FprEN 61212-3-2:2011 03/01/2012

03/01/2012

FprEN 60627:2011 03/01/2012

FprEN 60728-3-1:2011 03/01/2012

FprEN 50553:2011 11/10/2011

FprEN 62059-32-1:2011 11/10/2011

FprEN 62305-2:2011 Protection against lightning - Part 2: Risk management 10/01/2012

11/10/2011

FprEN 62656-1:2011 10/01/2012

FprEN 61189-11:2011 10/01/2012

prEN 61513 09/11/2011

EN 1459:1998+A2:2010/FprA310/10/2011

prEN ISO 7625 rev17/10/2011

Wind turbines - Part 12-2: Power performance of electricity producing wind turbines based on nacelle anemometry


ELECTRICAL & ELECTRONIC DEVICESSemiconductor devices - Mechanical and climatic test

methods - Part 27: Electrostatic discharge (ESD) sensitivity testing - Machine model (MM)


ELECTRICAL & ELECTRONIC DEVICES Electric clothes washer-dryers for household use - Methods

for measuring the performanceELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND



DEVICESFire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure


ELECTRICAL & ELECTRONIC DEVICESFire hazard testing - Part 11-2: Test flames - 1 kW nominal

pre-mixed flame: Apparatus, confirmatory test arrangement and guidance



Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods



Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods





Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices (30 MHz - 6 GHz)



Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance



Household microwave ovens - Methods for measuring performance



Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products



Hydraulic machines, radial and axial - Performance conversion method from model to prototype



Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes



60838-2-2:2006/FprA1:2011Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules


ELECTRICAL & ELECTRONIC DEVICESDiagnostic X-ray imaging equipment - Characteristics of

general purpose and mammographic anti-scatter gridsELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND

ELECTRICAL & ELECTRONIC DEVICES Cable networks for television signals, sound signals and

interactive services - Part 3-1: Methods of measurement of non-linearity for full digital channel load with DVB-C signals


ELECTRICAL & ELECTRONIC DEVICESRailway applications - Requirements for running capability in

case of fire on board of rolling stockELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND

ELECTRICAL & ELECTRONIC DEVICESElectricity metering equipment - Dependability - Part 32-1:

Durability - Testing of the stability of metrological characteristics by applying elevated temperature




DEVICESFprEN 60669-2-6:2011/FprAA:2011

Switches for household and similar fixed electrical installations - Part 2-6: Fireman's switches for exterior and interior signs and luminaires


ELECTRICAL & ELECTRONIC DEVICESStandardized product ontology register and transfer by

spreadsheets - Part 1: Logical structure for data parcelsELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND

ELECTRICAL & ELECTRONIC DEVICESTest methods for electrical materials, interconnection

structures and assemblies - Part 11: Measurement of melting temperature or melting temperature ranges of solder alloys


ELECTRICAL & ELECTRONIC DEVICESNuclear power plants - Instrumentation and control

important to safety - General requirement for systemsELECTRICAL, ELECTRONIC & MEDICAL EQUIPMENT AND ELECTRICAL & ELECTRONIC DEVICES

Safety of industrial trucks - Self-propelled variable reach trucks

MECHANICAL ENGINEERING

Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO/DIS 7625:2011)


prEN 1953 rev17/10/2011

prEN ISO 7625 rev17/10/2011

prEN 1953 rev17/10/2011

FprEN 1034-1620/11/2011

FprEN 1034-820/11/2011

EN 474-5:2006+A1:2009/FprA228/11/2011

FprEN 1583028/11/2011

prEN 1870-10 rev7/11/2011

prEN 1870-12 rev 28/11/2011

prEN 1870-1828/11/2011

prEN 12042 rev 28/11/2011

prEN 13155 rev Cranes - Non-fixed load lifting attachments28/11/2011

prEN 14364 rev31/10/2011

INDUSTRIAL APPLICATIONS

prEN 1796 rev31/10/2011


prEN ISO 1140 31/10/2011 INDUSTRIAL APPLICATIONS

prEN ISO 114131/10/2011


prEN ISO 134631/10/2011


prEN ISO 8331 rev18/11/2011


prEN ISO 14644-1 04/11/2011

prEN ISO 14644-2 04/11/2011

prEN 12599 rev 04/11/2011

prEN 16211 04/11/2011

prEN 442-1 rev 04/11/2011

prEN 442-2 Radiators and convectors - Part 2: Test methods and rating 04/11/2011

prEN 442-3 rev Radiators and convectors - Part 3: Evaluation of conformity 04/11/2011

prEN 16282-1 07/11/2011

prEN 16282-2 07/11/2011

prEN 16282-3 07/11/2011

prEN 16282-4 07/11/2011

Atomising and spraying equipment for coating materials - Safety requirements


Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO/DIS 7625:2011)


Atomising and spraying equipment for coating materials - Safety requirements


Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines


Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants


Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators


Rough-terrain variable reach trucks - Visibility - Test methods and verification


Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines


Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines


Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws


Food processing machinery - Automatic dough dividers - Safety and hygiene requirements



Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints

Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)Fibre ropes - Polyamide - 3-, 4-, 8- and 12- strand ropes (ISO/DIS 1140:2011)

Fibre ropes - Polyester - 3-, 4-, 8- and 12- strand ropes (ISO/DIS 1141:2011)

Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) - 3-, 4-, 8- and 12- strand ropes (ISO/DIS 1346:2011)

Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance (ISO/DIS 8331:2011)

Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration (ISO/DIS 14644-1:2010)

HEATING COOLING & VENTILATION

Cleanrooms and associated controlled environments - Part 2: Specifications for monitoring and periodic testing to prove continued compliance with ISO 14644-1 (ISO/DIS 14644-2:2010)


Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems


Ventilation for buildings - Measurement of air flows on site - methods


Radiators and convectors - Part 1: Technical specifications and requirements




Equipment for commercial kitchens - Components for ventilation of commercial kitchens - Part 1: General requirements including calculation method


Equipment for commercial kitchens - Components for ventilation of commercial kitchens - Part 2: Kitchen ventilation hoods - Design and safety requirements


Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 3: Kitchen ventilation ceilings - Design and safety requirements


Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 4: Air inlets and outlets - Design and safety requirements


prEN 16282-5 07/11/2011

prEN 16282-6 07/11/2011

prEN 16282-7 07/11/2011

prEN 16282-8 07/11/2011

EN 253:2009/prA1 28/11/2011

prEN 16313 28/11/2011

prEN 13136 rev 28/11/2011

prEN 12975-1 rev 28/11/2011

prEN 12975-3-1 28/11/2011

Formal Vote FprEN 14624 3-Oct-2011

UAP FprEN 12977-1 12-Dec-2011

UAP FprEN 12977-2 12-Dec-2011

UAP FprEN 12977-3 12-Dec-2011

UAP FprEN 12977-4 12-Dec-2011

UAP FprEN 12977-5 12-Dec-2011

CHEMICALS AND ENVIRONMENT

CHEMICALS AND ENVIRONMENT

prEN 1630017/10/2011 SOLID, LIQUID & AIR FUELS

prEN 302-1 rev17/10/2011 SOLID, LIQUID & AIR FUELS




prEN 302-517/10/2011 SOLID, LIQUID & AIR FUELS

prEN 302-6 rev 17/10/2011 SOLID, LIQUID & AIR FUELS


prEN 50465 18/11/2011 SOLID, LIQUID & AIR FUELS

prEN 14214 30/09/2011 SOLID, LIQUID & AIR FUELS

prEN ISO 10323 rev 31/10/2011 HEALTHCARE

EN 13081:2008/FprA1 10/10/2011 TRANSPORT & PACKAGING

EN 13082:2008/FprA1 10/10/2011 TRANSPORT & PACKAGING

prEN ISO 14819-1 rev 28/11/2011 TRANSPORT & PACKAGING

Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 5: Air duct - Design and dimensioning


Equipment for commercial kitchens - Components for ventilation of commercial kitchens - Part 6: Aerosol separators - Design and safety requirements


Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 7: Installation and use of fixed fire suppression systems


Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 8: Installations for treatment of cooking fumes - Requirements and testing


District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene


Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G Ύ A and inside cone


Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation


Thermal solar systems and componentsThermal solar systems and components - Solar collectors - Part 1: General requirements


Thermal solar systems and components - Solar collectors - Part 3-1: Qualification of solar absorber surface durability

HEATING COOLING & VENTILATIONPerformance of portable leak

detectors and of room monitors for halogenated refrigerantsThermal solar systems and components - Custom built systems - Part 1: General requirements for solar water Thermal solar systems and components - Custom built systems - Part 2: Test methods for solar water heaters and Thermal solar systems and components - Custom built systems - Part 3: Performance test methods for solar water Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar Thermal solar systems and components - Custom built systems - Part 5: Performance test methods for control

Automotive fuels - Determination of iodine value - Calculation method from gas chromatographic data

Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength

Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delaminationAdhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength

Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength

Adhesives for load-bearing structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditionsAdhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions

Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions

European product standard for combined heating power systems using gas fuel

Liquid petroleum products - Fatty acid methyl esters (FAME) for diesel engines - Requirements and test methods

Dentistry - Bore diameters for rotary instruments such as discs and wheels (ISO/DIS 10323:2011)

Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler

Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valveIntelligent transport systems - Traffic and travel information messages via traffic message coding - Part 1: Coding protocol for Radio Data System - Traffic Message Channel (RDS-TMC) using ALERT-C (ISO/DIS 14819-1:2011)



EN 15085-1:2007/prA1 28/11/2011 TRANSPORT & PACKAGING

prEN 16312 28/11/2011 TRANSPORT & PACKAGING

prEN 14067-4 28/11/2011 TRANSPORT & PACKAGING

prEN 16286-2 28/11/2011 TRANSPORT & PACKAGING

prEN 415-10Safety of packaging machines - Part 10: General Requirements

28/11/2011 TRANSPORT & PACKAGING

FprEN 13146-1 03/10/2011 TRANSPORT & PACKAGING








prEN 14960 18/11/2011 HEALTH & SAFETY

prEN 1400 rev 18/11/2011 HEALTH & SAFETY

prEN ISO 1368818/11/2011 HEALTH & SAFETY

prEN ISO 6529 rev18/11/2011 HEALTH & SAFETY

GENERAL

Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 2: Event and information codes for Radio Data System - Traffic Message Channel (RDS-TMC) using ALERT-C (ISO/DIS 14819-2:2011)Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 3: Location referencing for Radio Data System - Traffic message Channel (RDS-TMC) using ALERT-C

Railway applications - Welding of railway vehicles and components - Part 1: GeneralIntelligent transport systems - Automatic Vehicle and Equipment Registration (AVI/AEI) - Interoperable application profile for AVI/AEI and Electronic Register Identification using dedicated short range communication

Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track

Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements

Railway applications - Track - Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint

Railway applications - Track - Test methods for fastening systems - Part 2: Determination of torsional resistance

Railway applications - Track - Test methods for fastening systems - Part 3: Determination of attenuation of impact loads

Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading

Railway applications - Track - Test methods for fastening systems - Part 5: Determination of electrical resistance

Railway applications - Track - Test methods for fastening systems - Part 6: Effect of severe environmental conditions

Railway applications - Track - Test methods for fastening systems - Part 7: Determination of clamping force

Railway applications - Track - Test methods for fastening systems - Part 8: In service testing

Inflatable play equipment - Safety requirements and test methods

Child use and care articles - Soothers for babies and young children - Safety requirements and test methods

Protective clothing - General requirements (ISO/DIS 13688:2011)Protective clothing -- Protection against chemicals -- Determination of resistance of protective clothing materials to permeation by liquids and gases

FORMAL VOTE

FORMAL VOTE

FORMAL VOTE

FORMAL VOTE

FORMAL VOTE

FORMAL VOTE

FORMAL VOTE

FORMAL VOTE

2014.xls · XLS file · Web viewHuman exposure to radio frequency fields from hand-held and...

Documents

Transcript of 2014.xls · XLS file · Web viewHuman exposure to radio frequency fields from hand-held and...