π Cut Resistant Glove Guide - Uline HyFlex ® 11-518 Dyneema® ... π Cut Resistant Glove Guide Use...
5
5 ≥3,500 grams • Automative manufacturing • Heavy metal fabrication • Butchering, meat packing 4 ≥ 1,500 grams • Metal fabrication • Glass handling 3 ≥ 1,000 grams • Construction • Facilities maintenance 2 ≥500 grams • General warehouse receiving/packing • Handling small parts, wires or cables WHAT CUT LEVEL DO I NEED? WHICH LINER SHOULD I USE? Dyneema ® /HPPE Kevlar ® Cut Resistant Strength vs. Steel 15x 5x Lightweight Bleachable Heat Resistant ANSI* CUT LEVEL *American National Standards Institute Use this guide to determine what cut resistant glove you need. π Cut Resistant Glove Guide PAGE 1 OF 5
-
Upload
truongthien -
Category
Documents
-
view
242 -
download
2
Transcript of π Cut Resistant Glove Guide - Uline HyFlex ® 11-518 Dyneema® ... π Cut Resistant Glove Guide Use...
5 ≥3,500 grams
• Automative manufacturing• Heavy metal fabrication• Butchering, meat packing
4 ≥1,500 grams
• Metal fabrication• Glass handling
3 ≥1,000 grams
• Construction• Facilities maintenance
2 ≥500 grams
• General warehouse receiving/packing• Handling small parts, wires or cables
WHAT CUT LEVEL DO I NEED?
WHICH LINER SHOULD I USE?
Dyneema®/HPPE Kevlar®
Cut Resistant
Strength vs. Steel 15x 5x
Lightweight
Bleachable
Heat Resistant
ANSI* CUT
LEVEL
*American National Standards Institute
Use this guide to determine what cut resistant glove you need.
π Cut Resistant Glove Guide
PAGE 1 OF 5
Use this guide to determine what cut resistant glove you need.
π Cut Resistant Glove Guide
WHAT COATING DO I NEED?
PAGE 2 OF 5
BenefitsFlexible for dexterity
and comfort• Grips even when wet• Puncture/abrasion resistant
Thick textured coating for best overall grip
Applications General purpose Oily and wet surfaces Dry, rough surfaces
Polyurethane Nitrile Latex
WHAT GAUGE DO I NEED?
7 10 13 15 18
Lower Gauge Heavier Weight
Higher Gauge Lighter Weight
• Thicker construction• Less dexterity
• Thinner construction• Greater dexterity
WHAT ABRASION LEVEL DO I NEED?
1 2 3 4 65
Lower Level Shorter Life
Higher Level Longer Life
Product Material Palm Coating Gauge ANSI Cut Level
ANSI Abrasion
Level
S-14249 Uline Dyneema® Dyneema® Polyurethane 13 2 6
S-20703 Uline Durarmor™
HPPE Polyurethane 13 2 3
S-21574 Uline Durarmor™ Stealth
HPPE Polyurethane 15 2 6
S-19705 Ansell HyFlex® 11-518
Dyneema® Diamond Polyurethane 18 2 3
S-19246 Ansell HyFlex® 11-624
Dyneema® Polyurethane 13 2 5
S-19711 Ansell HyFlex® 11-644
HPPE Polyurethane 13 2 5
S-15382 Ansell HyFlex® 11-627
Dyneema® Polyurethane 15 2 6
S-22150 MaxiFlex® 34-8743
HPPE Blend Nitrile 15 2 3
S-14320 Ninja® Max
Dyneema® Blend
Polyurethane, Nitrile 10 3 4
S-20768 Ironclad® Kong Cut 5 Knit
HPPE Blend Nitrile 7 3 6
π Cut Resistant Glove Guide
PAGE 3 OF 5
Use this guide to determine what cut resistant glove you need.
PAGE 4 OF 5
π Cut Resistant Glove GuideUse this guide to determine what cut resistant glove you need.
Product Material Palm Coating Gauge ANSI Cut Level
ANSI Abrasion
Level
S-19247 Ansell Pawgard® Light Weight
Dyneema® Blend Uncoated 13 4 3
S-19248 Ansell Pawgard® Medium Weight
Dyneema® Blend Uncoated 10 5 4
S-7893 Industrial Knit Kevlar® Kevlar® Uncoated 7 2 1
S-9867 Uline Rubber Coated Kevlar®
Kevlar® Latex 10 2 3
S-16858 Uline Foam Nitrile Coated Kevlar®
Kevlar® Nitrile 13 2 3
S-19216 Ansell Hyflex® Lite 11-500
Kevlar® Nitrile 15 2 3
S-21085 Ansell Hyflex® Comfort 11-510
Kevlar® Nitrile 15 2 4
S-9866 PVC Dot Knit
Kevlar® PVC Dots 7 3 3
S-13385 Junk Yard Dog® Kevlar® Leather 7 3 6
S-15331 Uline Super Gription® Kevlar®
Kevlar® Latex 10 3 3
©2018 UlinePAGE 5 OF 5
π Cut Resistant Glove GuideUse this guide to determine what cut resistant glove you need.
Product Material Palm Coating Gauge ANSI Cut Level
ANSI Abrasion
Level
S-19706 Ansell HyFlex® Heavy Duty 11-501
Kevlar® Blend Nitrile 13 4 3
S-19707 Ansell HyFlex® 11-511
Kevlar® Blend Nitrile 13 4 4
S-18009 Steel Mesh
Steel Uncoated N/A 5 N/A
S-21087 Ansell HyFlex® 11-211 Sleeve
HPPE Uncoated 13 2 4
S-11432 Kevlar® Sleeve with Thumbhole
Kevlar® Uncoated 7 3 2
S-21086 Kevlar® Sleeve without Thumbhole
Kevlar® Uncoated 7 3 2
